Fittings

Your filters:
186 Found products
Products per page

Schiff-GL-Fitting-Verbindung

Bohlender / Fittings

Transition piece made of PTFE, for the transition from ground joints to GL thread for connecting hard-walled hoses (e.g. made of PTFE, PFA or FEP). Joint body with turned rings and knurled handle to loosen the joint. The medium only comes into contact with PTFE. Applications: For connecting pipes or hoses to vessels with ground joint. Insertion and locking of probes, thermometers, immersion tubes or cable feeds.

32.32 €

H 1124-14 - Schrauben mit Senkkopf

Bohlender / Fittings

Screw with countersunk head, material PTFE. Similar to DIN 963 / DIN EN ISO 2009.

11.97 €

Schrauben mit Zylinderkopf

Bohlender / Fittings

Cylinder head screw made of PTFE. Similar to DIN 84 / DIN EN ISO 120.

17.17 €

Schraub-Kupplung

Bohlender / Fittings

Product description: Two screw caps made of PPS (up to + 200 ° C) or PBTP (up to + 180 ° C) with GL thread and a PTFE / FKM seal, connecting piece made of PTFE. The medium only comes into contact with PTFE. To connect two GL thread with the same thread size.

49.95 €

Sechskantmutter, PTFE

Bohlender / Fittings

Hexagon nut made of PTFE. Similar to DIN 934 / DIN EN ISO 4032.

8.23 €

Blind-Stopfen

Bohlender / Fittings

Blind plug, made of PTFE, for closing unused fitting connections (a suitable nut made of PTFE glass fiber is also required).

9.02 €

Verbindungsstück-GL

Bohlender / Fittings

Straight connector made of PTFE, two connections with GL thread. Universally chemically resistant, the medium only comes in contact with PTFE.

139.40 €

Verbindungsstück-GL EX

Bohlender / Fittings

Straight connector made of dissipative PTFE-EX, two connections with GL thread. Connection of hoses or pipes with BOLA laboratory screw connections EX.

50.03 €

Kreuz-Verbindungsstück-GL EX

Bohlender / Fittings

Cross-shaped connector made of dissipative PTFE-EX, four connections with GL thread. Connection of hoses or pipes with BOLA laboratory screw connections EX.

98.92 €

Winkelstück-GL, L-Form

Bohlender / Fittings

L-shaped connector made of PTFE, two connections with GL thread. Universally chemically resistant, the medium only comes in contact with PTFE.

138.67 €

D 858-14 - Winkelstück-GL EX

Bohlender / Fittings

L-shaped connector made of dissipative PTFE-EX, two connections with GL thread. Connection of hoses or pipes with BOLA laboratory screw connections EX.

34.27 €

T-Verbindungsstück-GL

Bohlender / Fittings

T-shaped connector made of PTFE, three connections with GL thread. Universally chemically resistant, the medium only comes in contact with PTFE.

148.87 €

T-Verbindungsstück-GL EX

Bohlender / Fittings

T-shaped connector made of conductive PTFE-EX, three connections with GL thread. Connection of hoses or pipes with BOLA laboratory screw connections EX.

68.64 €

Kreuzverbindungsstück-GL

Bohlender / Fittings

Cross-shaped connection piece made of PTFE, four connections with GL thread. Universally chemically resistant, the medium only comes in contact with PTFE.

102.51 €

Einschraub-Verbindungs-Stück

Bohlender / Fittings

Straight connector made of PTFE, with nut made of PTFE glass fiber and a screw-in thread (either NPT thread or G thread). Universally chemically resistant, the medium only comes in contact with PTFE.

60.76 €

Einschraub-Verbindungsstück-GL

Bohlender / Fittings

Straight connector made of PTFE, with a screw-in thread (either NPT thread or G thread). Universally chemically resistant, the medium only comes into contact with PTFE.

55.79 €

Reduzierungen

Bohlender / Verbindungsstücke

Straight connector made of PTFE with nuts made of PTFE glass fiber. For connecting hoses or pipes with different outside diameters. Universally chemically resistant, the medium only comes into contact with PTFE.

73.15 €

718770 - Fingertight Fitting 1/16"

Macherey-Nagel GmbH & Co. KG / Fittings

Fingertight fitting 1/16" made of PEEK, 1-part combination nut and ferrule.

24.90 €

718771 - Fingertight Nut 1/16"

Macherey-Nagel GmbH & Co. KG / Fittings

Fingertight nut 1/16", PEEK

21.90 €

718583 - Anschlussschraube 1/16"

Macherey-Nagel GmbH & Co. KG / Fittings

HPLC accessories Nut 1/16" with bore suitable for 1/16" capillary tube

40.60 €

EXP Long HexHead Fitting, w/Hybrid Ferrule

Restek / Fittings

EXP Reusable Fittings for HPLC & UHPLC for 10-32 fittings and 1/16" tubing EXP Hex-Head Fittings • Hand-tight fitting style achieves effortless HPLC seals—no tools needed for a 8,700+ psi seal. • Both hand-tight and hex-head styles wrench tighten for reliable UHPLC use up to 20,000+ psi! • Patented ferrule can be installed repeatedly without compromising high-pressure seal. • Hybrid design combines the durability of titanium with the sealing ability of PEEK. • Cutting-edge system provides ZDV (zero dead volume) connection to any 10-32 female port. • Compatible with 1/16" PEEK and stainless steel tubing.

741.00 €

EXP Hand-Tight Fitting (Nut w/Ferrule)

Restek / Fittings

EXP Reusable Fittings for HPLC & UHPLC for 10-32 fittings and 1/16" tubing EXP Hand-Tight Fittings • Hand-tight fitting style achieves effortless HPLC seals—no tools needed for a 8,700+ psi seal. • Both hand-tight and hex-head styles wrench tighten for reliable UHPLC use up to 20,000+ psi! • Patented ferrule can be installed repeatedly without compromising high-pressure seal. • Hybrid design combines the durability of titanium with the sealing ability of PEEK. • Cutting-edge system provides ZDV (zero dead volume) connection to any 10-32 female port. • Compatible with 1/16" PEEK and stainless steel tubing.

733.00 €

25940 - EXP® "Hand-tight" Verbinder

Restek / Fittings

EXP Hand-Tight Coupler, 2 Hand-Tight Nut, s 2 Hybrid Ferrules

196.00 €

25078 - Endfitting mit flachem Boden

Restek / Fittings

Column End-Fittings 1/4-inch compression end-fittings are compatible with 1/16-inch connecting tubing using Valco® and Parker fittings. • Fittings with distribution cone are intended for use on 3.0–4.6 mm ID HPLC columns. • Fittings with flat bottom are intended for use on 1.0–3.0 mm ID HPLC columns.

42.00 €

25016 - PEEK Column Plug Universal 10-32

Restek / Fittings

Universal 10-32 PEEK Column Connectors and Plugs Universal PEEK connectors allow easy installation of all 1/16" tubing, including stainless steel, up to 5,000 psi (350 bar).

58.00 €

EXP Std HexHead Fitting, w/Hybrid Ferrule

Restek / Fittings

EXP Reusable Fittings for HPLC & UHPLC for 10-32 fittings and 1/16" tubing EXP Hex-Head Fittings • Hand-tight fitting style achieves effortless HPLC seals—no tools needed for a 8,700+ psi seal. • Both hand-tight and hex-head styles wrench tighten for reliable UHPLC use up to 20,000+ psi! • Patented ferrule can be installed repeatedly without compromising high-pressure seal. • Hybrid design combines the durability of titanium with the sealing ability of PEEK. • Cutting-edge system provides ZDV (zero dead volume) connection to any 10-32 female port. • Compatible with 1/16" PEEK and stainless steel tubing

741.00 €

25015 - PEEK Column Connector, Universal 10-32

Restek / Fittings

Universal 10-32 PEEK Column Connectors and Plugs Universal PEEK connectors allow easy installation of all 1/16" tubing, including stainless steel, up to 5,000 psi (350 bar).

67.00 €

EXP Short HexHead Fitting, w/Hybrid Ferrule

Restek / Fittings

EXP Short HexHead Fitting, w/Hybrid Ferrule, 10-pk

741.00 €

25077 - Endfitting 1/4 4,6mm Valco Style

Restek / Fittings

Column End-Fittings 1/4-inch compression end-fittings are compatible with 1/16-inch connecting tubing using Valco® and Parker fittings. • Fittings with distribution cone are intended for use on 3.0–4.6 mm ID HPLC columns. • Fittings with flat bottom are intended for use on 1.0–3.0 mm ID HPLC columns.

42.00 €

ProteCol Edelstahl Unions

SGE / Fittings

HPLC Unions are specifically designed and precision engineered for use in capillary LC. The ideal way to avoid any void or dead volume in a connection is to achieve a faultless butt connection. Features and Benefits • Zero dead volume design for no peak dispersion. • Easy to use. • Complete versatility - allows connection to the same or different sized tubing. • Available in PEEK and stainless steel. • Stainless steel unions can be finger tightened or tightened with a 3/16" wrench for high-pressure applications. • PEEK unions can be finger tightened. They are slightly larger than stainless steel unions but also lighter - less stress on your tubing. Recommended Applications ProteCol® Unions and reusable PEEK ferrules allow you to connect any combination of: • 1/32" PEEKsil®. • 1/16" PEEKsil. • 0.36 mm fused silica tubing. Use for connecting guard or trap columns to analytical columns, or for bypassing the analytical column. Connections | HPLC Unions Perfect Connections, Every Time PEEK ferrule Fused silica lined PEEK – PEEKsil Product Specifications ProteCol unions are available in either stainless steel or PEEK (for all sizes). All use the same range of reusable PEEK ferrules. Pressure Rating 5000 psi for the stainless steel unions, 2175 psi for the PEEK unions.

121.90 €

206102 - EasyLok Fitting

SGE / Fittings

EasyLok Fitting, 2 Fittings & 2 Ferrules EasyLOK fittings are composed of a knurled stainless steel nut and a double ended PEEK™ ferrule. The PEEK™ ferrule simply slides over any 1/16" OD tubing to its required position, while the nut is finger tightened. Unlike stainless steel, the PEEK™ ferrule will not crush the tubing and can be easily readjusted for quick column changes. The unique double ended ferrule design seals at two points to prevent leaks. The fittings are compatible with any standard female HPLC fitting, including Swagelok®, Parker™, Waters®, Valco® and Whatman®. EasyLOK fittings are recommended for use with SGE GLT™ columns. Specifications : Maximum Pressure Rating 5,000psi Thread Type 10-32

47.90 €

08290001 - 6-32 End Fittings for ProteCol Bio-Inert UHPLC

SGE / Fittings

6-32 End Fittings for ProteCol Bio-Inert UHPLC 2.1 mm ID Columns

Price on request

ProteCol™ PEEK Unions

SGE / Fittings

HPLC Unions are specifically designed and precision engineered for use in capillary LC. The ideal way to avoid any void or dead volume in a connection is to achieve a faultless butt connection. Features and Benefits • Zero dead volume design for no peak dispersion. • Easy to use. • Complete versatility - allows connection to the same or different sized tubing. • Available in PEEK and stainless steel. • Stainless steel unions can be finger tightened or tightened with a 3/16" wrench for high-pressure applications. • PEEK unions can be finger tightened. They are slightly larger than stainless steel unions but also lighter - less stress on your tubing. Recommended Applications ProteCol® Unions and reusable PEEK ferrules allow you to connect any combination of: • 1/32" PEEKsil®. • 1/16" PEEKsil. • 0.36 mm fused silica tubing. Use for connecting guard or trap columns to analytical columns, or for bypassing the analytical column. Connections | HPLC Unions Perfect Connections, Every Time PEEK ferrule Fused silica lined PEEK – PEEKsil Product Specifications ProteCol unions are available in either stainless steel or PEEK (for all sizes). All use the same range of reusable PEEK ferrules. Pressure Rating 5000 psi for the stainless steel unions, 2175 psi for the PEEK unions.

121.90 €

PEEK Fingertight Fitting

SGE / Fittings

PEEK Fingertight fittings

112.90 €

123708 - Ersatz SilFlow LC Mutter

SGE / Fittings

Replacement SilFlow™ LC Nut 1/32"

124.90 €

1034012 - AG Column Nuts Deep Well

SGE / Fittings

AG Column Nuts Deep Well

88.10 €

PSL613312 - PEEK Union mit 2 PEEK Fingertight Muttern und Double Ferrules

Waters / Fittings

· Connect any 1/16-inch tubing (PEEK, stainless steel, titanium, or Tefzel) · Low dead volume · 10–32 thread

69.00 €

HANDILOK CTFE Fitting

Waters / Fittings

Handilok™ fittings can replace conventional compression fittings used with 1/16 in. tubing without the need for tools and are compatible with all internal fittings having a 10–32 thread. They meet rigid high pressure requirements and will stand pressures in excess of 4,000 psi.

280.00 €

PSL613313 - PEEK Union without Nuts and Ferrules

Waters / Fittings

· Connect any 1/16-inch tubing (PEEK, stainless steel, titanium, or Tefzel) · Low dead volume · 10–32 thread

85.00 €

186008714 - PEEK One Piece Fingertight Fitting

Waters / Fittings

· Connect any 1/16-inch tubing (PEEK, stainless steel, titanium, or Tefzel) · Low dead volume · 10–32 thread

12.00 €

WAT023349 - AP-5 Inlet Connect Assy

Waters / Fittings

Advanced Purification AP-5 Inlet Connect Assy

945.00 €

700003779 - Endmutter, HP, 2,1 mm Inlet

Waters / Fittings

End Nut, HP, 2.1 mm Inlet, ACQUITY UPLC Column Replacement Parts

44.00 €

PSL613324 - PEEK Sechskantmutter

Waters / Fittings

PEEK Fittings with Double-Ferrules, 1/16 in., 10–32 Thread These fittings use a double-ferrule made of PEEK which grips the tubing in two places for unmatched reliability. These ferrules actually provide twice the holding power of single-ferrule fittings, and are ideal for use with PEEK and Tefzel tubing, which will often slip when used with single-ferrule fittings. When used with stainless steel or titanium tubing, double-ferrule fittings grip tighter for a more reliable connection at high pressure. We offer both fingertight and hex-head nuts for use with double-ferrules. The fingertight version may be hand-tightened for operation at up to 6,000 psi. Use the hex-head version for connections that are difficult to reach or closely spaced. These fittings fit virtually any female 1/16 in. fitting — Parker, Swagelok, Waters, Valco, Rheodyne, Upchurch, etc — all having 10–32 threads.

15.00 €

WAT027523 - AP-2 Funnel Assy

Waters / Fittings

Advanced Purification AP-2 Funnel Assy

430.00 €

WAT037525 - End Connector Kit

Waters / Fittings

End Connector Kit, (contains 1 Pair of End-fittings, C-clips and Coupling)

380.00 €

PSL613317 - PEEK T-Stück mit One-piece Fingertight Fitting

Waters / Fittings

· Connect any 1/16-inch tubing (PEEK, stainless steel, titanium, or Tefzel) · Low dead volume · 10–32 thread

85.00 €

PSL613321 - PEEK Starter Kit

Waters / Fittings

In a sturdy plastic case, the PEEK Starter Kit contains items that all biochromatographers will find helpful. Contains the following: PEEK Fingertight One-piece, 6/pk PEEK Handtight Nut, 4/pk PEEK Hex-head Nut, 4/pk PEEK Double Ferrules, 20/pk PEEK Tubing 1/16 in. × 0.25 mm (1 × 3 m) PEEK Tubing 1/16 in. × 0.50 mm (1 × 3 m) PEEK Union, 1/pk Elbow 90 Degrees, 2/pk Elbow 180 Degrees, 2/pk Guillotine Cutter, 1/pk PAT Mobile Phase Filter—“Last Drop”, 1/pk

640.00 €

PSL613318 - PEEK T-Stück ohne Fittings

Waters / Fittings

· Connect any 1/16-inch tubing (PEEK, stainless steel, titanium, or Tefzel) · Low dead volume · 10–32 thread

69.00 €

WAT027525 - AP-2 Inlet Connect Assy

Waters / Fittings

Advanced Purification AP-2 Inlet Connect Assy

735.00 €

PSL613319 - PEEK Kreuz mit einteiligem fingertight Fitting

Waters / Fittings

PEEK CROSS with One-piece Fingertight Fitting

97.00 €

MONTHLY TOP PRODUCTS

Contact form

You have any questions on our shop or to one of our products?

Please fill out your contact data and your information request, we will contact you as soon as possible with all requested information.

Catalog request

You have any questions on our shop or to one of our products?

Please fill out your contact data and your information request, we will contact you as soon as possible with all requested information.

Are you a company or a private?