Analyze toxic dioxins and furan congeners with unsurpassed performance and reproducibility with the Thermo Scientific™ TraceGOLD™ TG-Dioxin GC columns. • Engineered for Superior Performance • Isomer specificity for 2,3,7,8-TCDD and 2,3,7,8-TCDF achieved with a single GC column • High thermal stability—maximum temperatures up to 340°C • Unique selectivity for toxic dioxin and furan congeners for use as a confirmation GC column Applications: • Dioxins • Furans A Leap Forward in Column Performance with Low Bleed and Superior Inertness • This low-bleed, stable column produces consistent results. • Low baseline noise enables improved limits of detection with enhanced resolution of low level analytes. • Minimizing column bleed extends column lifetime, leading to higher productivity. • Reducing column bleed increases reproducibility of the stationary phase over time, resulting in greater run-to-run and batch-to-batch reproducibility. • Superior inertness ensures excellent peak shape and sensitivity, especially for highly active or difficult-to-analyze compounds. Similar To: Rtx-Dioxin2, DB-Dioxin
TraceGOLD™ TG-Mineral Oil GC Column
A nonpolar 100% polydimethylsiloxane, general-purpose, industry-standard column for the analysis of hydrocarbons, pesticides, PCBs, and sulfur compounds.
WAX GC Columns. DB-WAX is ideal for food, fragrance, and flavor applications. The column's lower temperature limit of 20 °C improves resolution of analytes with low boiling points. Features: • Polyethylene glycol (PEG) stationary phase • Close equivalent to USP Phase G16 • High polarity • Temperature limit of 20 °C is lowest of any bonded PEG phase • Improves resolution of low boiling point analytes • High column-to-column reproducibility • Bonded, crosslinked, and solvent rinsable • Exact replacement of HP-WAX • Tested with the tightest industry QC specifications for column bleed, sensitivity, and efficiency • Performance Summary shipped with each column
PLOT GC Columns. GS-Alumina is the most polar alumina phase, consisting of aluminum oxide with proprietary deactivation. It is an excellent general-use column for light hydrocarbon analysis (C1 to C8 hydrocarbon isomers) including C1 to C4 saturated and unsaturated hydrocarbons and cyclopropane from propylene analysis. Alumina columns tend to adsorb water and CO2 which, over time, results in changes in retention time. This column benefits from an advanced, proprietary deactivation process that allows for complete regeneration of a fully moisture saturated column within 7 hours or less at 200 °C.
Rapid-MS GC Column, 5 m 0.18 mm (micro union) DB-5MS 15 m, 0.53 mm, 1.00 μm, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC systems and all non-Agilent GC systems with a similarly sized oven. Agilent J&W Rapid-MS columns for high-speed GC/MS analysis utilize high optimal carrier gas velocity when performed under reduced pressure, to reduce run times by a factor of three to five for temperature programmed runs, and up to a factor of 10 for isothermal runs. Film thickness from 0.1 to 1 µm ensures high loadability, and the higher sensitivity typically increases the signal-to-noise ratio by a factor of three or greater. Features: • Equivalent to 5% phenyl, 95% dimethylpolysiloxane • Fast analysis time improves productivity • Reduce analysis time by 3–5x for temperature programmed runs, up to 10x for isothermal runs • Film thickness from 0.1 to 1 μm ensures high loadability and higher sensitivity • Low bleed • Tested with the tightest industry QC specifications for column bleed, sensitivity, and efficiency • Performance Summary shipped with each column
BPX70 GC Capillary Column 70% Cyanopropyl Polysilphenylene-siloxane • High temperature • Custom designed for separation of fatty acid methyl esters (FAMEs) • Industry standard column for FAME analysis • Ideal for cis/trans isomer separation • Polar phase Application areas: Fatty acid methyl esters, carbohydrates, pharmaceuticals, GCMS applications. Operating temperature: 0.2-0.5 μm film thickness: 50°C to 250/260°C. Suitable replacement for: CP-Sil 88, DB-23, Rtx-2330, SP-2330, SP-2380, VF-23ms, ZB-FAME.
HT8-PCB GC Capillary Column 8% Phenyl (equiv.) Polycarborane siloxane • Unique ultra high temperature column optimizes for 209 PCB congener separations • Optimized for 209 PCB congener separations
SolGel-WAX GC Capillary Column •The world's highest temperature wax phase •Bonded polyethylene glycol •Very robust high-temperature column •Less susceptible to damage by oxygen than conventional wax phases •Polar phase •Low bleed and inert Application Areas: Recommended for highly active compounds
Please fill out your contact data and your information request, we will contact you as soon as possible with all requested information.
Please fill out your contact data and your information request, we will contact you as soon as possible with all requested information.
