GC capillary columns

Your filters:
999 Found products
Products per page

DB-624 LTM GC Säule

Agilent / GC Kapillarsäulen

LTM column module. Application Specific GC Columns. DB-624 is recommended for EPA methods 502.2 and 8021, as well as for fast GC/MS volatiles analysis. It is specifically designed for the analysis of volatile priority pollutants and residual solvents. Features: • Specifically designed for the analysis of volatile priority pollutants and residual solvents • Bonded, crosslinked, and solvent rinsable • Equivalent to USP Phase G43 • Exact replacement of HP-624 • Available with DuraGuard (GC column with a built-in guard column) • No cryogenics needed for U.S. EPA Method 502.2 • Excellent for U.S. EPA Methods 501.3, 502.2, 503.1, 524.2, 601, 602, 8010, 8015, 8020, 8240, 8260 and USP 467 • Excellent inertness for active compounds • Tested with the tightest industry QC specifications for column bleed, sensitivity, and efficiency • Performance Summary shipped with each column

1,465.00 €

HP-1 GC Säule LTM

Agilent / GC Kapillarsäulen

LTM column module. This format is only compatible with Agilent Low Thermal Mass Series Rapid Heating/Cooling (LTM) Systems.

1,885.00 €

HP-FFAP GC Säule

Agilent / GC Kapillarsäulen

HP-FFAP is designed primarily for the analysis of organic acids, free fatty acids, or samples that require quantitation of acidic impurities. The FFAP stationary phase is modified with acid to provide a very inert column that can accommodate the demanding analysis of acids dissolved in water. Features • Nitroterephthalic acid modified polyethylene glycol • High polarity • Designed for the analysis of volatile fatty acids and phenols • Replaces OV-351 • Bonded and cross-linked • solvent rinsable • Close equivalent to USP Phase G35 • Note: We do not recommend the use of water or methanol to rinse HP-FFAP GC columns • Similar Phases: Stabilwax-DA, Nukol, 007-FFAP, BP21, AT-1000, OV-351

964.00 €

CP-Sil 2 CB GC Säule

Agilent / GC Kapillarsäulen

GC capillary column.

674.00 €

CP-Sil 43 CB GC Säule

Agilent / GC Kapillarsäulen

GC capillary column.

1,121.00 €

CP-Sil 5 CB-MS GC Säule

Agilent / GC Kapillarsäulen

Standard Polysiloxane GC Columns: • 100% dimethylpolysiloxane (PDMS) • Nonpolar • General purpose phase • Bonded, crosslinked, and solvent rinsable • Separates almost entirely based on boiling points, making this column suitable for a wide range of applications with a broad temperature range • Available in Fused Silica or UltiMetal • Tested against the strictest industry QC specifications for column bleed, sensitivity, and efficiency • Performance Summary shipped with each column • Similar phases: SPB-1, Rtx-1, BP-1, OV-1, OV-101, 007-1(MS), SP-2100, SE-30, ZB-1, AT-1, ZB-1

1,762.00 €

CP-Sil 24 CB GC Säule

Agilent / GC Kapillarsäulen

GC capillary column.

946.00 €

DB-624 GC LTM Säule

Agilent / GC Kapillarsäulen

LTM column module.

1,728.00 €

DB-624 Ultra Inert GC Säule

Agilent / GC Kapillarsäulen

Ultra Inert GC Columns. DB-624 UI is optimal for the fast analysis of volatile organic compounds (VOCs) in pharmaceutical, environmental, food, and industrial chemical applications. The unique Ultra Inert deactivation process enhances peak shape, improving signal-to-noise levels and increasing sensitivity for qualitative and quantitative analysis.

664.00 €

DB-VRX GC Säule

Agilent / GC Kapillarsäulen

Application Specific GC Columns. DB-VRX features unique selectivity, engineered for optimum resolution of volatiles. These low-polarity columns deliver excellent peak shapes and are fully compliant with U.S. EPA methods 502.2, 524.2, and 8260. They are bonded and crosslinked, and require no subambient cooling to resolve the six 'gases'. DB-VRX features an operating temperature range of –20 to 260 °C.

1,790.00 €

DB-VRX LTM GC Säule

Agilent / GC Kapillarsäulen

LTM column module.

1,752.00 €

DB-17 GC Säule

Agilent / GC Kapillarsäulen

Standard Polysiloxane GC Columns. DB-17 is a (50%-phenyl)-methylpolysiloxane column of mid polarity. Equivalent to USP phase G3, it is excellent for confirmation analysis. Features: • (50%-Phenyl)-methylpolysiloxane • Mid polarity – slightly more polar than HP-50+ • Excellent for confirmation analysis • Bonded, crosslinked, and solvent rinsable • Equivalent to USP phase G3 • Tested with the tightest industry QC specifications for column bleed, sensitivity, and efficiency • Performance Summary shipped with each column • Similar phases: Rtx-50, 007-17(MPS-50), SP-2250, SPB-50, ZB-50, AT-50

1,311.00 €

121-4722LTM - DB-17MS GC Säule

Agilent / GC Kapillarsäulen

LTM column module.

1,827.00 €

DB-624 Ultra Inert GC Säule

Agilent / GC Kapillarsäulen

Ultra Inert GC Columns. DB-624 UI is optimal for the fast analysis of volatile organic compounds (VOCs) in pharmaceutical, environmental, food, and industrial chemical applications. The unique Ultra Inert deactivation process enhances peak shape, improving signal-to-noise levels and increasing sensitivity for qualitative and quantitative analysis.

671.00 €

125-1334G5 - DB-624 DuraGuard GC Säule

Agilent / GC Kapillarsäulen

DuraGuard column. Constructed with integral deactivated fused silica tubing that minimizes front-end contamination and reduces connection problems associated with union connections.

1,116.00 €

125-14A4 - DB-502.2 GC Säule

Agilent / GC Kapillarsäulen

GC column. Similar Phases: Rtx-502.2, VOCOL, HP-VOC Temperature Limits: 0 to 260/280°C

1,728.00 €

DB-17 LTM GC Säule

Agilent / GC Kapillarsäulen

Standard Polysiloxane GC Columns. DB-17 is a (50%-phenyl)-methylpolysiloxane column of mid polarity. Equivalent to USP phase G3, it is excellent for confirmation analysis. Features: • (50%-Phenyl)-methylpolysiloxane • Mid polarity – slightly more polar than HP-50+ • Excellent for confirmation analysis • Bonded, crosslinked, and solvent rinsable • Equivalent to USP phase G3 • Tested with the tightest industry QC specifications for column bleed, sensitivity, and efficiency • Performance Summary shipped with each column • Similar phases: Rtx-50, 007-17(MPS-50), SP-2250, SPB-50, ZB-50, AT-50

1,721.00 €

DB-225 Intuvo GC Säule

Agilent / GC Kapillarsäulen

Intuvo GC column module (compatible only with the Intuvo 9000 GC System)

930.00 €

19095L-121 - HP-17 GC-Säule

Agilent / GC Kapillarsäulen

GC column.

401.00 €

HP-PLOT Al2O3 KCI GC Säule

Agilent / GC Kapillarsäulen

HP-PLOT Al₂O₃ KCl is the least polar alumina phase and is deactivated with sodium chloride. It is the standard column choice for light hydrocarbon analysis, particularly C1 to C8 hydrocarbon isomers. Excellent for the quantification of dienes, especially propadiene and butadiene from ethylene and propylene streams. Similar phases: Rt-Alumina PLOT, Alumina PLOT, Al 2O 3/KCl, AB-PLOT Al 2O 3 KCl, AT-Alumina

1,476.00 €

MONTHLY TOP PRODUCTS

Contact form

You have any questions on our shop or to one of our products?

Please fill out your contact data and your information request, we will contact you as soon as possible with all requested information.

Catalog request

You have any questions on our shop or to one of our products?

Please fill out your contact data and your information request, we will contact you as soon as possible with all requested information.

Are you a company or a private?