ULTRON ES-OVM Chiral,Analytical 4.6x150
ULTRON ES-OVM Chiral,Narrow-Bore 2.0x150
Ultron 120Å ES-Pepsin Chiral, 4.6 x 150 mm, 5 µm, with guard
ZORBAX Eclipse XDB 80Å C18, 4.6 x 75 mm, 3.5 µm HPLC column
ZORBAX Rapid Resolution HT HPLC columns.
Narrow Bore Rapid Resolution HD HPLC Column.
ZORBAX StableBond 300 C18 cartridge (PrepHT)
ZORBAX StableBond 300 C3 cartridge (PrepHT)
ZORBAX StableBond 300 C8, cartridge (PrepHT)
PrepHT,Zorbax,300SB-CN,21.2x250mm,7uCrt
Zorbax Bonus-RP, 2.1x150mm, 3.5um
Zorbax Bonus-RP, 3,5 um, 4,6 x 100 mm
Zorbax Eclipse XDB-CN, 2.1x50mm, 5um
ZORBAX Extend-C18, 21.2 x 50 mm cartridge, 7 µm. ZORBAX guard cartridge protects from particulates without compromising performance. It recommends guard columns for all uses to extend column life and maintain system efficiency.
Zorbax Rapid Resolution HD 300-Diphenyl column
Zorbax Rapid Resolution HD 300SB-C18, 2.1 x 150 mm, 1.8
ZORBAX HPLC Capillary Columns (glass-lined stainless steel)
Agilent ZORBAX 300Å StableBond columns are an ideal choice for the reproducible separations of proteins and peptides for two reasons. Wide-pore, 300Å columns are necessary for an efficient separation of proteins and peptides, or other large molecules, in order to allow these analytes to completely access the bonded phase. Second, 300StableBond columns are unmatched in their durability at low pH, such as with TFA-containing mobile phases. For LC/MS separations at low pH, 300StableBond columns can also be used with formic acid and acetic acid mobile phase modifiers. These columns are available in five different bonded phases (C18, C8, C3, and CN) for selectivity and recovery optimization of proteins and polypeptides. To further increase sample recovery and improve efficiency for difficult proteins, 300StableBond columns can be used up to 80 °C. Capillary and nano columns can be used for either 1-D or 2-D proteomics separations. View our full range of bioHPLC columns for your area of interest, get resources, and take advantage of special offers.
ZORBAX column family is one of the most popular HPLC column families for reversed-phase HPLC. ZORBAX columns are based on traditional fully porous particles and offer the highest loading capacity and resolution. From ZORBAX Eclipse Plus C18 to sub-2 micron UHPLC columns, a wide selection of stationary phases and particle sizes allows you to fine-tune your selectivity to match your application. Features • Traditional, fully porous particles available in 1.8, 3.5, and 5 µm sizes. With selected products also available in 7 μm particles for preparative HPLC (see Prep LC columns section) • ZORBAX Eclipse Plus columns are the recommended starting point for method development and benefit from the ultimate performance from fully porous silica-based columns • ZORBAX StableBond columns offer the highest stability for low pH applications down to pH 1 while ZORBAX SB-Aq deliver robust, reproducible separations with highly aqueous mobile phases, including 100% water • ZORBAX Extend-C18 columns offer high efficiency for high pH applications up to pH 11.5 • ZORBAX Bonus RP columns offer unique selectivity due to an embedded amide linkage in the C14-alkyl chain making them ideal for 100% aqueous mobile phases and for compounds that are not retained on standard reverse phase columns • ZORBAX Rx columns are made from highly pure (> 99.995 %) porous silica with a higher carbon load (12%) • ZORBAX Eclipse PAH columns deliver high resolution separation of the 16 PAHs in EPA 610 and have been specifically tested with PAHs for maximum reproducibility
ZORBAX HPLC Capillary Columns (glass-lined stainless steel)
Reversed-Phase HPLC Columns. The ZORBAX column family is one of the most popular high-performance liquid chromatography (HPLC) column families for reversed-phase HPLC. ZORBAX columns are based on traditional fully porous particles and offer the highest loading capacity and resolution. From Eclipse Plus, Eclipse XDB, StableBond, Bonus-RP and more, the ZORBAX column portfolio offers a wide selection of stationary phases allowing you to fine-tune your selectivity to match your application. Improve resolution by utilizing sub-2 µm particles to maximize system efficiency and confidently scale-up to preparative HPLC and/or easy HPLC method transfer. Features: • Traditional, fully porous particles available in 1.8, 3.5, and 5 µm sizes. With selected products also available in 7 μm particles for preparative HPLC (see Prep LC columns section) • ZORBAX Eclipse Plus columns are the recommended starting point for method development at mid-pH and benefit from the ultimate performance from fully porous silica-based columns • ZORBAX StableBond columns offer the highest stability for low pH applications down to pH 1 while ZORBAX SB-Aq deliver robust, reproducible separations with highly aqueous mobile phases, including 100% water • ZORBAX Eclipse XDB columns – C18, C8, Phenyl and CN – provide four bonded phase choices for method development optimization. These columns are eXtra Densely Bonded (XDB) and double endcapped through a proprietary process to cover as many active silanols as possible. Eclipse XDB columns are available in 1.8, 3.5, 5 and 7 μm particle sizes for high speed, high resolution, analytical and prep scale separations • ZORBAX Extend-C18 columns offer high efficiency and selectivity advantages for basic compounds in for high pH applications up to pH 11.5 • ZORBAX Bonus RP columns offer unique selectivity due to an embedded amide linkage in the C14-alkyl chain making them ideal for 100% aqueous mobile phases and for compounds that are not retained on standard reverse phase columns • ZORBAX Rx columns are made from highly pure (>99.995 %) porous silica with a higher carbon load (12%) • ZORBAX Eclipse PAH columns deliver high resolution separation of the 16 polycyclic aromatic hydrocarbons (PAHs) in EPA 610 and have been specifically tested with PAHs for maximum reproducibility • ZORBAX Rapid Resolution High Definition (RRHD) columns are packed with 1.8 μm particles and stable up to 1200 bar for fast, high-resolution separations of your most complex samples • ZORBAX Rapid Resolution High Throughput (RRHT) columns use totally porous 1.8 μm particles to provide maximum resolution in ultra-fast and high-resolution analyses with a pressure limit of 600 bar • Agilent UHPLC Guards extend the lifetime of analytical columns without diminishing performance and use easy-to-install hardware that fits directly on the end of the column
Reversed-Phase HPLC Columns. The ZORBAX column family is one of the most popular high-performance liquid chromatography (HPLC) column families for reversed-phase HPLC. ZORBAX columns are based on traditional fully porous particles and offer the highest loading capacity and resolution. From Eclipse Plus, Eclipse XDB, StableBond, Bonus-RP and more, the ZORBAX column portfolio offers a wide selection of stationary phases allowing you to fine-tune your selectivity to match your application. Improve resolution by utilizing sub-2 µm particles to maximize system efficiency and confidently scale-up to preparative HPLC and/or easy HPLC method transfer. Features: • Traditional, fully porous particles available in 1.8, 3.5, and 5 µm sizes. With selected products also available in 7 μm particles for preparative HPLC (see Prep LC columns section) • ZORBAX Eclipse Plus columns are the recommended starting point for method development at mid-pH and benefit from the ultimate performance from fully porous silica-based columns • ZORBAX StableBond columns offer the highest stability for low pH applications down to pH 1 while ZORBAX SB-Aq deliver robust, reproducible separations with highly aqueous mobile phases, including 100% water • ZORBAX Eclipse XDB columns – C18, C8, Phenyl and CN – provide four bonded phase choices for method development optimization. These columns are eXtra Densely Bonded (XDB) and double endcapped through a proprietary process to cover as many active silanols as possible. Eclipse XDB columns are available in 1.8, 3.5, 5 and 7 μm particle sizes for high speed, high resolution, analytical and prep scale separations • ZORBAX Extend-C18 columns offer high efficiency and selectivity advantages for basic compounds in for high pH applications up to pH 11.5 • ZORBAX Bonus RP columns offer unique selectivity due to an embedded amide linkage in the C14-alkyl chain making them ideal for 100% aqueous mobile phases and for compounds that are not retained on standard reverse phase columns • ZORBAX Rx columns are made from highly pure (>99.995 %) porous silica with a higher carbon load (12%) • ZORBAX Eclipse PAH columns deliver high resolution separation of the 16 polycyclic aromatic hydrocarbons (PAHs) in EPA 610 and have been specifically tested with PAHs for maximum reproducibility • ZORBAX Rapid Resolution High Definition (RRHD) columns are packed with 1.8 μm particles and stable up to 1200 bar for fast, high-resolution separations of your most complex samples • ZORBAX Rapid Resolution High Throughput (RRHT) columns use totally porous 1.8 μm particles to provide maximum resolution in ultra-fast and high-resolution analyses with a pressure limit of 600 bar • Agilent UHPLC Guards extend the lifetime of analytical columns without diminishing performance and use easy-to-install hardware that fits directly on the end of the column
Reversed-Phase HPLC Columns. The ZORBAX column family is one of the most popular high-performance liquid chromatography (HPLC) column families for reversed-phase HPLC. ZORBAX columns are based on traditional fully porous particles and offer the highest loading capacity and resolution. From Eclipse Plus, Eclipse XDB, StableBond, Bonus-RP and more, the ZORBAX column portfolio offers a wide selection of stationary phases allowing you to fine-tune your selectivity to match your application. Improve resolution by utilizing sub-2 µm particles to maximize system efficiency and confidently scale-up to preparative HPLC and/or easy HPLC method transfer. Features: • Traditional, fully porous particles available in 1.8, 3.5, and 5 µm sizes. With selected products also available in 7 μm particles for preparative HPLC (see Prep LC columns section) • ZORBAX Eclipse Plus columns are the recommended starting point for method development at mid-pH and benefit from the ultimate performance from fully porous silica-based columns • ZORBAX StableBond columns offer the highest stability for low pH applications down to pH 1 while ZORBAX SB-Aq deliver robust, reproducible separations with highly aqueous mobile phases, including 100% water • ZORBAX Eclipse XDB columns – C18, C8, Phenyl and CN – provide four bonded phase choices for method development optimization. These columns are eXtra Densely Bonded (XDB) and double endcapped through a proprietary process to cover as many active silanols as possible. Eclipse XDB columns are available in 1.8, 3.5, 5 and 7 μm particle sizes for high speed, high resolution, analytical and prep scale separations • ZORBAX Extend-C18 columns offer high efficiency and selectivity advantages for basic compounds in for high pH applications up to pH 11.5 • ZORBAX Bonus RP columns offer unique selectivity due to an embedded amide linkage in the C14-alkyl chain making them ideal for 100% aqueous mobile phases and for compounds that are not retained on standard reverse phase columns • ZORBAX Rx columns are made from highly pure (>99.995 %) porous silica with a higher carbon load (12%) • ZORBAX Eclipse PAH columns deliver high resolution separation of the 16 polycyclic aromatic hydrocarbons (PAHs) in EPA 610 and have been specifically tested with PAHs for maximum reproducibility • ZORBAX Rapid Resolution High Definition (RRHD) columns are packed with 1.8 μm particles and stable up to 1200 bar for fast, high-resolution separations of your most complex samples • ZORBAX Rapid Resolution High Throughput (RRHT) columns use totally porous 1.8 μm particles to provide maximum resolution in ultra-fast and high-resolution analyses with a pressure limit of 600 bar • Agilent UHPLC Guards extend the lifetime of analytical columns without diminishing performance and use easy-to-install hardware that fits directly on the end of the column
Reversed-Phase HPLC Columns. The ZORBAX column family is one of the most popular high-performance liquid chromatography (HPLC) column families for reversed-phase HPLC. ZORBAX columns are based on traditional fully porous particles and offer the highest loading capacity and resolution. From Eclipse Plus, Eclipse XDB, StableBond, Bonus-RP and more, the ZORBAX column portfolio offers a wide selection of stationary phases allowing you to fine-tune your selectivity to match your application. Improve resolution by utilizing sub-2 µm particles to maximize system efficiency and confidently scale-up to preparative HPLC and/or easy HPLC method transfer. Features: • Traditional, fully porous particles available in 1.8, 3.5, and 5 µm sizes. With selected products also available in 7 μm particles for preparative HPLC (see Prep LC columns section) • ZORBAX Eclipse Plus columns are the recommended starting point for method development at mid-pH and benefit from the ultimate performance from fully porous silica-based columns • ZORBAX StableBond columns offer the highest stability for low pH applications down to pH 1 while ZORBAX SB-Aq deliver robust, reproducible separations with highly aqueous mobile phases, including 100% water • ZORBAX Eclipse XDB columns – C18, C8, Phenyl and CN – provide four bonded phase choices for method development optimization. These columns are eXtra Densely Bonded (XDB) and double endcapped through a proprietary process to cover as many active silanols as possible. Eclipse XDB columns are available in 1.8, 3.5, 5 and 7 μm particle sizes for high speed, high resolution, analytical and prep scale separations • ZORBAX Extend-C18 columns offer high efficiency and selectivity advantages for basic compounds in for high pH applications up to pH 11.5 • ZORBAX Bonus RP columns offer unique selectivity due to an embedded amide linkage in the C14-alkyl chain making them ideal for 100% aqueous mobile phases and for compounds that are not retained on standard reverse phase columns • ZORBAX Rx columns are made from highly pure (>99.995 %) porous silica with a higher carbon load (12%) • ZORBAX Eclipse PAH columns deliver high resolution separation of the 16 polycyclic aromatic hydrocarbons (PAHs) in EPA 610 and have been specifically tested with PAHs for maximum reproducibility • ZORBAX Rapid Resolution High Definition (RRHD) columns are packed with 1.8 μm particles and stable up to 1200 bar for fast, high-resolution separations of your most complex samples • ZORBAX Rapid Resolution High Throughput (RRHT) columns use totally porous 1.8 μm particles to provide maximum resolution in ultra-fast and high-resolution analyses with a pressure limit of 600 bar • Agilent UHPLC Guards extend the lifetime of analytical columns without diminishing performance and use easy-to-install hardware that fits directly on the end of the column
Reversed-Phase HPLC Columns. ZORBAX PrepHT columns are designed for rapid analytical to preparative scale-up without loss of resolution. For complex separations on larger columns (21.2 mm id; 150 mm length and longer), the 7 μm particle size balances high efficiency and high loadability. You also get the benefits of: • Easy scale-up with ZORBAX phases • Fast preparative separations—up to 2000 mg • High efficiency and yield with 5 μm to 7 μm particles • Easy installation: finger-tight connections effective up to 5000 psi/350 bar • Analytical phase selectivity for your prep separations
Reversed-Phase HPLC Columns. ZORBAX PrepHT columns are designed for rapid analytical to preparative scale-up without loss of resolution. For complex separations on larger columns (21.2 mm id; 150 mm length and longer), the 7 μm particle size balances high efficiency and high loadability. You also get the benefits of: • Easy scale-up with ZORBAX phases • Fast preparative separations—up to 2000 mg • High efficiency and yield with 5 μm to 7 μm particles • Easy installation: finger-tight connections effective up to 5000 psi/350 bar • Analytical phase selectivity for your prep separations
Reversed-Phase HPLC Columns. The ZORBAX column family is one of the most popular high-performance liquid chromatography (HPLC) column families for reversed-phase HPLC. ZORBAX columns are based on traditional fully porous particles and offer the highest loading capacity and resolution. From Eclipse Plus, Eclipse XDB, StableBond, Bonus-RP and more, the ZORBAX column portfolio offers a wide selection of stationary phases allowing you to fine-tune your selectivity to match your application. Improve resolution by utilizing sub-2 µm particles to maximize system efficiency and confidently scale-up to preparative HPLC and/or easy HPLC method transfer. Features: • Traditional, fully porous particles available in 1.8, 3.5, and 5 µm sizes. With selected products also available in 7 μm particles for preparative HPLC (see Prep LC columns section) • ZORBAX Eclipse Plus columns are the recommended starting point for method development at mid-pH and benefit from the ultimate performance from fully porous silica-based columns • ZORBAX StableBond columns offer the highest stability for low pH applications down to pH 1 while ZORBAX SB-Aq deliver robust, reproducible separations with highly aqueous mobile phases, including 100% water • ZORBAX Eclipse XDB columns – C18, C8, Phenyl and CN – provide four bonded phase choices for method development optimization. These columns are eXtra Densely Bonded (XDB) and double endcapped through a proprietary process to cover as many active silanols as possible. Eclipse XDB columns are available in 1.8, 3.5, 5 and 7 μm particle sizes for high speed, high resolution, analytical and prep scale separations • ZORBAX Extend-C18 columns offer high efficiency and selectivity advantages for basic compounds in for high pH applications up to pH 11.5 • ZORBAX Bonus RP columns offer unique selectivity due to an embedded amide linkage in the C14-alkyl chain making them ideal for 100% aqueous mobile phases and for compounds that are not retained on standard reverse phase columns • ZORBAX Rx columns are made from highly pure (>99.995 %) porous silica with a higher carbon load (12%) • ZORBAX Eclipse PAH columns deliver high resolution separation of the 16 polycyclic aromatic hydrocarbons (PAHs) in EPA 610 and have been specifically tested with PAHs for maximum reproducibility • ZORBAX Rapid Resolution High Definition (RRHD) columns are packed with 1.8 μm particles and stable up to 1200 bar for fast, high-resolution separations of your most complex samples • ZORBAX Rapid Resolution High Throughput (RRHT) columns use totally porous 1.8 μm particles to provide maximum resolution in ultra-fast and high-resolution analyses with a pressure limit of 600 bar • Agilent UHPLC Guards extend the lifetime of analytical columns without diminishing performance and use easy-to-install hardware that fits directly on the end of the column
ZORBAX GF-250, 21.2 x 250 mm, 6 µm, cartridge (PrepHT). Use with hardware kit 820400-901
ZORBAX GF-450, 21.2 x 250 mm, 5 µm, cartridge (PrepHT). Use with hardware kit 820400-901
Agilent ZORBAX fully porous particle columns for normal phase HPLC and supercritical fluid chromatography (SFC) are designed for the retention and separation of lipophilic compounds. The unique ZORBAX chemistries deliver outstanding efficiency in both achiral SFC and normal phase chromatography due to the similar retention mechanisms of both LC modes on the polar stationary phases used. The recommended ZORBAX phases are Rx-Sil, amino (NH2), cyano (CN), Eclipse XDB-CN, and HILIC Plus (HILIC phases in SFC only).
Reversed-Phase HPLC Columns. The ZORBAX column family is one of the most popular high-performance liquid chromatography (HPLC) column families for reversed-phase HPLC. ZORBAX columns are based on traditional fully porous particles and offer the highest loading capacity and resolution. From Eclipse Plus, Eclipse XDB, StableBond, Bonus-RP and more, the ZORBAX column portfolio offers a wide selection of stationary phases allowing you to fine-tune your selectivity to match your application. Improve resolution by utilizing sub-2 µm particles to maximize system efficiency and confidently scale-up to preparative HPLC and/or easy HPLC method transfer. Features: • Traditional, fully porous particles available in 1.8, 3.5, and 5 µm sizes. With selected products also available in 7 μm particles for preparative HPLC (see Prep LC columns section) • ZORBAX Eclipse Plus columns are the recommended starting point for method development at mid-pH and benefit from the ultimate performance from fully porous silica-based columns • ZORBAX StableBond columns offer the highest stability for low pH applications down to pH 1 while ZORBAX SB-Aq deliver robust, reproducible separations with highly aqueous mobile phases, including 100% water • ZORBAX Eclipse XDB columns – C18, C8, Phenyl and CN – provide four bonded phase choices for method development optimization. These columns are eXtra Densely Bonded (XDB) and double endcapped through a proprietary process to cover as many active silanols as possible. Eclipse XDB columns are available in 1.8, 3.5, 5 and 7 μm particle sizes for high speed, high resolution, analytical and prep scale separations • ZORBAX Extend-C18 columns offer high efficiency and selectivity advantages for basic compounds in for high pH applications up to pH 11.5 • ZORBAX Bonus RP columns offer unique selectivity due to an embedded amide linkage in the C14-alkyl chain making them ideal for 100% aqueous mobile phases and for compounds that are not retained on standard reverse phase columns • ZORBAX Rx columns are made from highly pure (>99.995 %) porous silica with a higher carbon load (12%) • ZORBAX Eclipse PAH columns deliver high resolution separation of the 16 polycyclic aromatic hydrocarbons (PAHs) in EPA 610 and have been specifically tested with PAHs for maximum reproducibility • ZORBAX Rapid Resolution High Definition (RRHD) columns are packed with 1.8 μm particles and stable up to 1200 bar for fast, high-resolution separations of your most complex samples • ZORBAX Rapid Resolution High Throughput (RRHT) columns use totally porous 1.8 μm particles to provide maximum resolution in ultra-fast and high-resolution analyses with a pressure limit of 600 bar • Agilent UHPLC Guards extend the lifetime of analytical columns without diminishing performance and use easy-to-install hardware that fits directly on the end of the column
Please fill out your contact data and your information request, we will contact you as soon as possible with all requested information.
Please fill out your contact data and your information request, we will contact you as soon as possible with all requested information.
