HPLC guard column - requires Column Protection System guard column holder (REF 718966) - for main columns 2 mm ID. For protection of your main HPLC column from contamination, it is recommended to use guard columns. These short columns are placed into a guard column holder. The guard column holder in combination with a guard column inside is installed between the injector and the HPLC column. This installation prevents chemical impurities to reach the main column. Because a contamination could form an irreversible bond with the column packing material (stationary phase) and this can result in shorter column life.
HPLC guard column EC 4/2 NUCLEOSHELL Biphenyl - require Column Protection System guard column holder (REF 718966) - for analytical columns with 2 mm ID. Hydrophobic phase with alternative selectivity compared to classical C18 modifications. The separation principle based on two retention mechanisms - π-π interactions and hydrophobic interactions. This provides better retention of aromatic and unsaturated substances. This stationary HPLC phase is based on core-shell technology silica gel particles and shows excellent performance under highly aqueous conditions. Suitable for LC/MS due to low bleeding characteristics.
HPLC guard column EC 4/3 NUCLEOSHELL Biphenyl - require Column Protection System guard column holder (REF 718966) - for analytical columns with 3, 4 or 4.6 mm ID. Hydrophobic phase with alternative selectivity compared to classical C18 modifications. The separation principle based on two retention mechanisms - π-π interactions and hydrophobic interactions. This provides better retention of aromatic and unsaturated substances. This stationary HPLC phase is based on core-shell technology silica gel particles and shows excellent performance under highly aqueous conditions. Suitable for LC/MS due to low bleeding characteristics.
HPLC guard column - requires Column Protection System guard column holder (REF 718966) - for main columns with 3, 4 or 4.6 mm ID. For protection of your main HPLC column from contamination, it is recommended to use guard columns. These short columns are placed into a guard column holder. The guard column holder in combination with a guard column inside is installed between the injector and the HPLC column. This installation prevents chemical impurities to reach the main column. Because a contamination could form an irreversible bond with the column packing material (stationary phase) and this can result in shorter column life.
HPLC guard column - requires Column Protection System guard column holder (REF 718966) - for main columns with 3, 4 or 4.6 mm ID. For protection of your main HPLC column from contamination, it is recommended to use guard columns. These short columns are placed into a guard column holder. The guard column holder in combination with a guard column inside is installed between the injector and the HPLC column. This installation prevents chemical impurities to reach the main column. Because a contamination could form an irreversible bond with the column packing material (stationary phase) and this can result in shorter column life.
HPLC guard column - requires Column Protection System guard column holder (REF 718966) - for main columns with 3, 4 or 4.6 mm ID. For protection of your main HPLC column from contamination, it is recommended to use guard columns. These short columns are placed into a guard column holder. The guard column holder in combination with a guard column inside is installed between the injector and the HPLC column. This installation prevents chemical impurities to reach the main column. Because a contamination could form an irreversible bond with the column packing material (stationary phase) and this can result in shorter column life.
HPLC guard column - requires Column Protection System guard column holder (REF 718966) - for main columns with 3, 4 or 4.6 mm ID. For protection of your main HPLC column from contamination, it is recommended to use guard columns. These short columns are placed into a guard column holder. The guard column holder in combination with a guard column inside is installed between the injector and the HPLC column. This installation prevents chemical impurities to reach the main column. Because a contamination could form an irreversible bond with the column packing material (stationary phase) and this can result in shorter column life.
HPLC guard column - requires Column Protection System guard column holder (REF 718966) - for main columns with 3, 4 or 4.6 mm ID. For protection of your main HPLC column from contamination, it is recommended to use guard columns. These short columns are placed into a guard column holder. The guard column holder in combination with a guard column inside is installed between the injector and the HPLC column. This installation prevents chemical impurities to reach the main column. Because a contamination could form an irreversible bond with the column packing material (stationary phase) and this can result in shorter column life.
HPLC guard column - requires Column Protection System guard column holder (REF 718966) - for main columns with 3, 4 or 4.6 mm ID. For protection of your main HPLC column from contamination, it is recommended to use guard columns. These short columns are placed into a guard column holder. The guard column holder in combination with a guard column inside is installed between the injector and the HPLC column. This installation prevents chemical impurities to reach the main column. Because a contamination could form an irreversible bond with the column packing material (stationary phase) and this can result in shorter column life.
VarioPrep HPLC guard column cartridge (short) VP 10/16 NUCLEODUR C8 ec length: 10 mm, ID: 16 mm- compatible with VarioPrep HPLC column with ID: 16 mm or ID: 21 mm - requires VP guard column holder 16 mm (short version, REF: 718256)
VarioPrepHPLC guard column cartridge (short) VP 10/16 NUCLEODUR SPHINX RP length: 10 mm, ID: 16 mm- compatible with VarioPrep HPLC column with ID: 16 mm or ID: 21 mm - requires VP guard column holder 16 mm (short version, REF: 718256)
VarioPrep HPLC guard column cartridge (short) VP 10/16 NUCLEODUR C8 Gravity length: 10 mm, ID: 16 mm- compatible with VarioPrep HPLC column with ID: 16 mm or ID: 21 mm - requires VP guard column holder 16 mm (short version, REF: 718256)
VarioPrep HPLC guard column cartridge (short) VP 10/16 NUCLEODUR PolarTec length: 10 mm, ID: 16 mm - compatible with VarioPrep HPLC column with ID: 16 mm or ID: 21 mm - requires VP guard column holder 16 mm (short version, REF: 718256)
VarioPrep HPLC guard column cartridge VP 10/8 NUCLEODUR - polar universal guard column cartridge - length: 10 mm, ID: 8 mm - compatible with VarioPrep HPLC column with ID: 8 mm or ID: 10 mm - for all polar NUCLEODUR- and NUCLEOSIL phases - requires VP guard column holder 8 mm (p/n 718251)
VarioPrep HPLC guard column cartridge VP 10/8 NUCLEODUR C18 ec Length: 10 mm, ID: 8 mm- compatible with VarioPrep HPLC column with ID: 8 mm or ID: 10 mm - requires VP guard column holder 8 mm (p/n 718251)
VarioPrep HPLC guard column cartridge VP 10/8 NUCLEODUR C18 Gravity Length: 10 mm, ID: 8 mm - compatible with VarioPrep HPLC column with ID: 8 mm or ID: 10 mm - requires VP guard column holder 8 mm (p/n 718251)
VarioPrep HPLC guard column cartridge VP 10/8 NUCLEODUR C18 HTec length: 10 mm, ID: 8 mm - compatible with VarioPrep HPLC column with ID: 8 mm or ID: 10 mm - requires VP guard column holder 8 mm (p/n 718251)
HPLC guard column - requires Column Protection System guard column holder (REF 718966) - for main columns with 3, 4 or 4.6 mm ID. For protection of your main HPLC column from contamination, it is recommended to use guard columns. These short columns are placed into a guard column holder. The guard column holder in combination with a guard column inside is installed between the injector and the HPLC column. This installation prevents chemical impurities to reach the main column. Because a contamination could form an irreversible bond with the column packing material (stationary phase) and this can result in shorter column life.
HPLC guard column - requires Column Protection System guard column holder (REF 718966) - for main columns with 3, 4 or 4.6 mm ID. For protection of your main HPLC column from contamination, it is recommended to use guard columns. These short columns are placed into a guard column holder. The guard column holder in combination with a guard column inside is installed between the injector and the HPLC column. This installation prevents chemical impurities to reach the main column. Because a contamination could form an irreversible bond with the column packing material (stationary phase) and this can result in shorter column life.
HPLC guard column - requires Column Protection System guard column holder (REF 718966) - for main columns with 3, 4 or 4.6 mm ID. For protection of your main HPLC column from contamination, it is recommended to use guard columns. These short columns are placed into a guard column holder. The guard column holder in combination with a guard column inside is installed between the injector and the HPLC column. This installation prevents chemical impurities to reach the main column. Because a contamination could form an irreversible bond with the column packing material (stationary phase) and this can result in shorter column life.
Please fill out your contact data and your information request, we will contact you as soon as possible with all requested information.
Please fill out your contact data and your information request, we will contact you as soon as possible with all requested information.