Protective cover - single - for Scales PJ4000/6000/6
Paper cover for printer RS-P25, USB-P25, RS-P26, RS-P28
Draft shield element: back left door
Electrolyte solution, NaCl 3 mol/l+AgCl, 250 ml
CarePac customized 3rd wire weight E2 including calibration certificate Cost Savings: Only what is needed for routine testing, two weights rather than the entire set of weights. Optional Third Weight: CarePacs offer the option of adding a third weight of between 1 mg and 100 g for customized testing, e.g. determination of minimum weight. Professional Accessories: Ergonomic tweezers and weight forks as well as clean-room approved gloves and cleaning cloths that meet the highest requirements of any industry.
Furnace lid, huge TGA furnace
pH combination electrode with integrated Pt1000 temperature sensor, PEEK shaft and permanently mounted cable. For general laboratory and outdoor applications, robust and maintenance-free. PEEK shaft with excellent chemical and mechanical resistance. A sensor for the highest demands. Thanks to the solid XEROLYT® reference electrolyte, no diaphragm is required. No diaphragm, no clogging. The integrated temperature sensor guarantees that you always measure with the correct temperature compensation.
pH buffer solution pH 4.01 250 ml, c(Na+) = 3.9 mol/L
A semi-micro pH combination electrode with a glass body and S7 screw head. Designed for measurements in small or narrow vessels. The small shaft diameter also allows measurements of very small sample volumes. The electrolyte of the ARGENTHAL™ reference system is free of silver ions. This means there is no risk of the diaphragm becoming clogged with sulfides or proteins. The sensor head with S7 connection offers flexibility and can be easily connected to any measuring device.
pH combination electrode with plastic shaft, ring diaphragm and fixed cable. For soft water such as surface water and drinking water. The strong electrolyte outflow lowers the potential at the diaphragm, resulting in more stable measurements. IP67 – For waterproof measurements: This means that your portable measuring system (Seven2Go and InLab sensor) can also be used without any problems in wet and demanding environments. Spill-proof watering cap: The easy-care watering cap with self-locking screw guarantees clean and safe storage of the electrode. Specifications: Diaphragm: PTFE, porous Shaft material: PSU Reference system: ARGENTHAL™ with silver ion barrier (Ag+) Reference electrolyte: 3 mol/L KCl Membrane resistance (25°C): <150 MΩ Connection: BNC/RCA (Cinch)
Mettler Toledo Advanced MS-TS Precision Balances have 11 integrated weighing applications. The durable MonoBloc weigh cell includes a minimum weight function to reference the smallest sample amount that can be weighed accurately and is designed to last, resisting harsh chemicals and environmental influences. The large 7-inch color touchscreen has simple menus and a graphic indicator function that shows how much of the total weight is in use. Other key features include FACT automatic internal adjustment, guided leveling and EasyDirect compatibility. • MonoBloc Weigh Cell with Overload Protection • Calibration Type: Internal (FACT Automatic) •LevelControl funktion • Balance Housing: Chemical Resistant Die-cast Aluminum • Connection Type: USB-A, USB-B, RS232, Ethernet (LAN), Bluetooth (Optional), Wireless LAN (WLAN) (optional) • Display: 7 in. Color TFT Touchscreen • Connection Type: USB Host/USB Device/RS-232 • Leveling : Built-in Level Control • Material: Die-cast Aluminum • Display Type : TFT CE marked, ISO 9001, ISO 14001
SevenGo Duo pro, - dual-channel measuring device for pH/ion/conductivity measurement. • Intelligent Sensor Management (ISM®) • Multi-parameter • Memory size: 500 measurements • Backlit display • 10 languages • Security and compliance: password protection, GLP, user management • Soft keys • Protection class: Water and dustproof (IP67) Specifications: Parameters: pH / conductivity / ions / redox Channel: dual channel Sensor: InLab 738-ISM / InLab Expert Go-ISM Temperature accuracy (±): 0.2°C Dimensions: 220 x 90 x 45mm Sensor included: General sensor Connections: BNC / RCA / Cinch / LTW / IR Temperature measurement resolution: 0.1°C Temperature range: -30°C - 130°C Weight: 325 g pH measuring range: -2 – 19.999 Resolution pH measurement value: 0.001 / 0.01 / 0.1 pH measurement accuracy (±): 0.002 Conductivity: Resolution: 0.01 to 1 Conductivity measuring range: 0.01 µS/cm to 1000 mS/cm Conductivity: Accuracy (±): 0.5% Ion concentration resolution: 3 digits (depending on device) Ion concentration: Accuracy (±): 0.5% Resolution mV measurement value: 0.1/1 mV accuracy (±): 0.1 Ion concentration: Measuring range: 1.00 E-9 to 9.99 E+9 mV measurement range: -1999 to 1999 mV Scope of delivery: SG78 field kit with InLab Expert Go-ISM and InLab 738-ISM, cable 2 m, uGo transport case, pH buffer bag and cal. bottles
The WMS weigh modules guarantee high precision for any environment thanks to individual selection of filter characteristics and stability criteria The extremely robust stainless steel design and the built-in overload protection guarantee high reliability, long lifetime and easy handling. Designed to meet the most demanding customer specifications.The WMS is a high speed high accuracy weigh module with a split-second stabilization time. Interfaces: RS422, RS232 Protection Rating: IP54, IP66
Sample tray holder for halogen moisture analyzer HX204 / HS153
pH electrodes for measurements in aqueous and non-aqueous media DG electrodes are used for pH measurement and titration in difficult samples, low ionic and non-aqueous media. DM electrodes with silver and platinum rings are suitable for redox titration with and without pH change, e.g. argentometry and Karl Fischer titration. Plug & Play capable electrodes are automatically recognised by METTLER-TOLEDO pH meters and electrode type, serial number, calibration data and operating hours can be read out and processed by the software. DG111-SC: For pH measurement and acid/base titration in aqueous media. With S7 screw cap and detachable cable. ARGENTHAL™ reference system. DGi111-SC: Same as DG111-SC, with Plug & Play functionality. DG113-SC: For pH measurement and titrations in non-aqueous media. With S7 screw cap and detachable cable. Ag/AgCl/LiCl reference system. DGi113-SC: Same as DG113-SC, with Plug & Play functionality and ARGENTHAL™/LiCl reference system and improved chemical resistance. DGi114-SC: For pH measurements and acid/base titrations in clogged and protein or sulfide containing samples. With Plug & Play functionality and ARGENTHAL™ reference system. DG115-SC: For pH measurements and acid/base titrations in aqueous media. Suitable for use in polar solvents, e.g. titration with perchloric acid in acetic acid or with sodium methylate in methanol and other media with low ion concentration. With S7 screw cap and ARGENTHAL™ reference system. DGi115-SC: Same as DG115-SC, with Plug & Play functionality. DGi116-Solvent: Especially suitable for acid/base titrations that require fast response times in non-aqueous media, e.g. TAN/TBN determinations in oils, titrations with perchloric acid, cyclohexylamine and alcoholic HCl, alkalis or Na-Methylate. For determination of epoxy numbers, acid values and saponification numbers, also free fatty acids in polymers, oils/fats and resins. With Plug & Play functionality and ARGENTHAL™/LiCl reference system. DGi117-Water: For pH measurement and acid/base titrations in aqueous solutions of low ion conductivity and low buffer capacity. With integrated Pt1000 temperature sensor. Suitable for measurements in rain-, surface- and drinking water. With Plug & Play functionality and ARGENTHAL™/LiCl reference system.
Please fill out your contact data and your information request, we will contact you as soon as possible with all requested information.
Please fill out your contact data and your information request, we will contact you as soon as possible with all requested information.
