Liquid collector, attachment opening. To empty the sample, the valve is opened by placing it on the sample vessel.
In contrast to conventional scoops, the stainless steel scoop has no openings, undercuts or gaps in which residues could settle. Processing without pores thanks to high-quality laser weld seams. The stainless steel scoop is flame sterilizable and can therefore be made completely sterile.
With TargetDispo, a target point sample is taken from a precisely determined position of the sample. The collector is pierced closed into the powder or granulate, and only opened and closed again at the removal point. An exact target point sample is thus obtained. The sample can easily be emptied using the open handle. HDPE. Manufactured in a clean room, individually packaged. Optionally sterilized by gamma rays. Ø 25 mm / Ø tip 30 mm.
Disposable zone collector for sampling from several layers of the sample. Suitable for flowable powders and small-grain granulates. The representative all-layer sample can be emptied directly into a sample container through the open handle. • Easy emptying through opening in the handle (Ø 14 mm) • HDPE • Manufactured in a clean room, individually packaged • Optionally sterilized by gamma rays • Ø 25 mm / Ø tip 30 mm
Sample bottle made of glass (accessory for professional sampler aluminum).
PTFE adapter MiniSampler for sample cans PFA 6205-0090, 6205-0180 (accessory for MiniSampler for general sampling from barrels, canisters, tanks, etc.)
Very robust design with specially hardened, forged drill heads for determining soil quality, moisture and structure. The shape of the mole drill heads ensures a minimum of friction when screwing in and pulling the mole out of the ground. This reduces the physical exertion enormously. The mole is composed of different parts. Handle with rod 75 cm, if required extension rod 100 cm and one of seven available drill heads, each designed for very specific soil conditions. The parts can be easily connected to one another. Can be extended to a drilling depth of up to 5 m with extension rods.
Liquids can be sucked in and stored in a sterile manner with the suction syringe. The amount of sample can be easily read off the printed content scale. The syringe is delivered in sterile packaging and is ready for immediate use. The suction syringe can be extended as required with a hose. A Luer adapter is supplied for the 100 ml suction syringe.
The SteriPlast® scraper made of polystyrene is produced in our class 7 (10,000) clean room, individually packaged for disposable use and then sterilized by gamma rays. Stable and handy scraper for disposable use. The scraper is suitable for scraping, smoothing or cleaning, as well as removing residues.
There are various drill heads for Mole, each designed for very specific soil conditions: Clay and damp soils: With narrow flanks that cause the least amount of friction / resistance in the soil. Since moist soils are generally highly cohesive, the soil will still adhere well to the auger. Sand: With wide flanks and thus a wider wing in which the sand can hold on well. Coarse sand: With extra wide flanks, which close the drill even more and thus also hold coarse sand soils or very dry soils. Combination: Holds both highly cohesive and less cohesive soils. Riverside: Very suitable for drilling in hard, encrusted soils and soils that are mixed with fine gravel. The drill blades protrude beyond the core drill, which greatly minimizes friction. Gravel auger: With slightly curved, inclined blades that pull themselves down in the gravel. Any stones will be pinched between the drill flanks. The finer soil material (coarse sand with fine gravel) is held inside the drill. Stone catcher: With the stone catcher, stones that prevent a smooth sampling with one of the drill heads can be caught and pulled out.
The QuickPicker handkerchief is particularly suitable when bulk goods are taken directly from sacks or big bags and are to be filled directly into the original sample bottle. QuickPicker is easy to use and clean. Without undercuts and edges, there are no sample residues that could falsify subsequent sampling, and thus serves ideal quality control. The QuickPicker sampler is supplied complete with two PE sample bottles, 250 ml and with a cleaning brush.
LiquiSampler the sample collector for liquids, according to DIN EN ISO 15528. Made of ultra-pure and chemically inert PTFE / FEP or PP for contamination-free sampling. Sampling from open and closed containers, barrels, tanks, silos, bodies of water. Suitable for all commercially available barrels and containers with openings of at least 32 mm in diameter. Easy to clean - all surfaces are pore-free and without undercuts, dirt deposits are avoided. Only the round threads that have been tried and tested in food hygiene are used. Dismantling and cleaning are very easy. Target point, all-layer and soil sample possible.
With MicroDispo, a particularly small amount of sample (10 ml) can be taken. In the pharmaceutical sector in particular, it often happens that only a small amount can or should be obtained for analysis. With the disposable sampler, precise target point samples can be taken from free-flowing powders and small-grain bulk material. • Ergonomic handle • Manufactured in a clean room, individually packaged • Optionally sterilized by gamma rays
Residual liquid from pump pipes or samplers is safely collected with the drip safety stand. The safety stand is resistant to diluted alkalis and acids. The collecting container can also be filled with a neutralization medium, which dilutes and neutralizes the residual liquid. The upright tube is firmly attached to the wall with sturdy pipe clamps. The pipe clamps can easily be opened to remove the safety stand. The container for collecting the liquid can be unscrewed and is therefore easy to replace or empty.
Sampling set for VacuMan with suction hose and sample container.
Simple disposable sampler for taking thin liquids. If the DispoPipette is opened and inserted into the liquid, an all-layer sample is obtained; if it is closed, it is guided to the sampling point and only then is opened, a target point sample is obtained. Very easy to use. With two opening sizes (2.5 / 5.5 mm) for different viscosities. All-layer and target point samples possible. HDPE. Manufactured in a clean room, individually packaged. Optionally sterilized by gamma rays. Ø 21 mm.
Scraper with antistatic additive, ideal for robust use in chemistry and industry. Polypropylene is highly chemical and temperature resistant.
Sampler for all-layer samples of viscous, pasty, pulpy substances, according to DIN 51750 pt. 3 and DIN EN ISO 15528. Different layers are retained, especially with paste-like substances.
The zone collector Spiralus guarantees a zone-precise sampling through all layers of the bulk material. Due to the spiral arrangement of the sample slots, they open from bottom to top with a time delay. In this way, the bottom opening is first filled, and then the opening above it until the entire Spiralus is filled. The geometry of the sample slots prevents grains from being cut. The zone collector Spiralus provides an excellent all-shift sample. Intended use. The Spiralus is particularly suitable for coarse-grained bulk goods, grains and pellets at locations such as bulk floors, warehouses, trucks, rail wagons, etc.
Sampler for frozen products in the food and beverage sector as well as for semi-solid substances. The very robust cavity drill cuts quickly into the sample with its sharp saw crown. A sample cylinder (cross-sectional sample) with a length of up to 20 cm can be cut out. Ice drill consisting of three parts: drill, drill head for insertion in conventional drills, cutter with which the sample can be pushed out of the drill head.
Please fill out your contact data and your information request, we will contact you as soon as possible with all requested information.
Please fill out your contact data and your information request, we will contact you as soon as possible with all requested information.
