Spare parts. Tuttnauer - SP Solenoid valve brass SOL026-0032
Spare parts. Tuttnauer - SP Miniature PCB Relay coil24VAC CTP201-0273
Spare parts. Tuttnauer - SP Cut-Off Thermostat 155°CTHE005-0016
Spare parts. Tuttnauer - SP water filter PVC FIL175-0087
The 5075ELVC sterilizer comes with a 50cm chamber diameter size with a depth of 75cm. The unit comes standard with an internal thermometer, water sensing electrode, external pressure gauge and a printer. This unit runs at 3-phase 230V and comes with a set of 2 large wire baskets. Compressed air can be connected to this unit to use its cooling function.
Tuttnauer Sterilizer Accessories. Container, small. For use in 3850ELV
Spare parts. Tuttnauer - SP Steam Trap ARM100-0057
Tuttnauer Sterilizer Accessories. Basket, large. For use in 5075ELV
Spare parts. Tuttnauer - SP fuse glass 5x20mm 5A SB ELE035-0170
Spare parts. Tuttnauer - SP Heating element 2840EL HEA010-0020
Spare parts. Tuttnauer - SP Miniature PCB relay coil24VDC CTP201-0272
Tuttnauer Sterilizer Accessories. Container, small. For use in 5075ELV
Spare parts. Tuttnauer - SP Fuse 5x20mm 2A SB/Time Lag ELE035-0174
Spare parts. Tuttnauer - SP Silicon gasket for automatic door GAS080-0313
The 5075EL Laboratory Sterilizer has a chamber diameter of 19.6 inches and a depth of 29.5 inches. The device comes standard with a printer and is specially designed for laboratory applications. This device is operated 3-phase with 230 V. Tuttnauer laboratory autoclaves are designed to offer high quality and reliable performance in a wide range of laboratory applications. Each model offered here can be configured with different options, e.g. rapid cooling of the process and sterile goods, efficient drying, sterilization of biological hazardous goods and waste as well as F0 value calculation. The autoclaves are offered as a table or floor model and with different chamber volumes.
Hot air steriliser SFplus Sterilization instead of disinfecting vessels and instruments in the laboratory. A hot air sterilizer protects and preserves life in medicine. The indispensable safety feature for this hot air steriliser: Setpoint Wait. This means that the programme for sterilisation only starts when the set temperature has been reached. This feature can also be used with freely positionable Pt100 temperature sensors. Here the sterilisation time only begins when the set temperature has been reached at all measurement points, and reliable sterilisation is guaranteed at all times. Specifications: forced air circulation, with TwinDISPLAY, 32 l working-temperature range at least 10 °C above ambient temperature to +250 °C setting temperature range +20 °C to +250 °C with 1 grid (30-55), with 2 grids (75-750) stainless steel door electronically adjustable air flap from 0 to 100 % in 10 % steps and adjustable fan speed from 0 % to 100 % in 10 % steps Ethernet interface for reading out protocol log uploading programmes and for online logging USB port on ControlCOCKPIT for use of USB stick multiple overtemperature protection internal data logger with storage capacity of at least 10 years calibration facility; works calibration certificate at +160 °C • Housing and interior made of stainless steel • Voltage: 230 V, 50/60 Hz, 400 V, 50/60 Hz (size: 450-750)
Hot air steriliser SF Sterilization instead of disinfecting vessels and instruments in the laboratory. A hot air sterilizer protects and preserves life in medicine. The indispensable safety feature for this hot air steriliser: Setpoint Wait. This means that the programme for sterilisation only starts when the set temperature has been reached. This feature can also be used with freely positionable Pt100 temperature sensors. Here the sterilisation time only begins when the set temperature has been reached at all measurement points, and reliable sterilisation is guaranteed at all times. Specifications: • forced air circulation • with SingleDISPLAY • working-temperature range at least 10 °C above ambient temperature to +250 °C • setting temperature range +20 °C to +250 °C • with 1 grid (30-55), with 2 grids (75-750) • stainless steel door, • electronically adjustable air flap from 0 to 100 % in 10 % steps and adjustable fan speed from 0 % to 100 % in 10 % steps • Ethernet interface for reading out protocol log • double overtemperature protection • internal data logger with storage capacity of at least 10 years, calibration facility • works calibration certificate at +160 °C • Housing and interior made of stainless steel • Voltage: 230 V, 50/60 Hz, 400 V, 50/60 Hz (size: 450-750)
Hot air steriliser SNplus Sterilization instead of disinfecting vessels and instruments in the laboratory. A hot air sterilizer protects and preserves life in medicine. The indispensable safety feature for this hot air steriliser: Setpoint Wait. This means that the programme for sterilisation only starts when the set temperature has been reached. This feature can also be used with freely positionable Pt100 temperature sensors. Here the sterilisation time only begins when the set temperature has been reached at all measurement points, and reliable sterilisation is guaranteed at all times. Specifications: • natural convection • with TwinDISPLAY • working-temperature range at least 5 °C above ambient temperature to +250 °C • setting temperature range +20 °C to +250 °C • with 1 grid (30-55), with 2 grids (75-750) • stainless steel door, electronically adjustable air flap from 0 to 100 % in 10 % steps • Ethernet interface for reading out protocol log • uploading programmes and for online logging • USB port on ControlCOCKPIT for use of USB stick • multiple overtemperature protection • internal data logger with storage capacity of at least 10 years • calibration facility; works calibration certificate at +160 °C • Housing and interior made of stainless steel • Voltage: 230 V, 50/60 Hz, 400 V, 50/60 Hz (size: 450-750)
Hot air steriliser SN Sterilization instead of disinfecting vessels and instruments in the laboratory. A hot air sterilizer protects and preserves life in medicine. The indispensable safety feature for this hot air steriliser: Setpoint Wait. This means that the programme for sterilisation only starts when the set temperature has been reached. This feature can also be used with freely positionable Pt100 temperature sensors. Here the sterilisation time only begins when the set temperature has been reached at all measurement points, and reliable sterilisation is guaranteed at all times. Specifications: • natural convection • with SingleDISPLAY • working-temperature range at least 5 °C above ambient temperature to +250 °C • setting temperature range +20 °C to +250 °C • with 1 grid (30-55), with 2 grid (75-260) • stainless steel door •electronically adjustable air flap from 0 to 100 % in 10 % steps • Ethernet interface for reading out protocol log • double overtemperature protection • internal data logger with storage capacity of at least 10 ye ars • calibration facility • works calibration certificate at +160 °C • Housing and interior made of stainless steel • Voltage: 230 V, 50/60 Hz, 400 V, 50/60 Hz (size: 450-750)
Spare basket, perforated bottom, for autoclaves, made of stainless steel.
Please fill out your contact data and your information request, we will contact you as soon as possible with all requested information.
Please fill out your contact data and your information request, we will contact you as soon as possible with all requested information.
