Heating Cartridge for the basic parallel synthesis device
Hollow core bolt (Fitting) 1/16"
Bearing seat (Drive assembley) (Parallel Synthesis)
Hose connection for Parallel Synthesis
Counter ring for Parallel Synthesis
Hinge 30x22 stainless steel für Waste Cube
Segment temperature zone Solid for Parallel Synthesis
DURAN® Flat flanges. Ground, without groove.
Separating funnel stopcocks. With short inlet, complete with PTFE-key.
DURAN® Bell Jar. With glass knob top, for vacuum use.
DURAN® KPG stirrer shafts, interchangeable, bearing surface ground and polished, WS 10, 440 mm
DURAN® Dropping funnel. Cylindrical, with scale and ground joint. With standard ground stopcock and retaining device. DIN ISO 4800.
DURAN® KPG stirrer shafts. Interchangeable, bearing surface ground and polished.
Screwthread couplings, PBT. DIN screwthread. For flexible connection of two glass screwthreads. With integral PTFE-faced silicone (VMQ) seals. Temperature resistant to max. 180°C. Autoclavable at 121°C.
DURAN® KPG Stirrer shafts. Interchangeable, hollow.
Separating funnel stopcocks, Gilson type. Complete with SBW key.
DURAN® Blanks for reaction vessels. For DN 100. Important: At a maximum operating temperature of 250°C and at permissible operating pressure, the temperature difference in the glass wall of the flat flange reaction vessels may not exceed 30°C.
DURAN® Spherical joints, ball. Inches size.
Replacement Seal. For plastic hose connections (292550603 and 292470504). From silicone (VMQ). Autoclavable. Maximum usage temperature 140°C.
DURAN® KPG Stirrer shafts. Interchangeable, solid.
DURAN® Blanks for seperating and dropping funnels. Cylindrical with stopper bed for ISO 4800.
O-Ring, silicone rubber (VMQ), for flat flanges.
Separating funnel stopcocks, Gilson type. Complete with PTFE key.
DURAN® Blanks for lids, flat flange. Low form, unground.
DURAN® Dropping funnel. Cylindrical, with scale and ground joint. With standard ground stopcock and retaining device. DIN ISO 4800.
DURAN® Adapters. Stopper type, solid.
DURAN® Dropping funnel. Cylindrical, with scale and ground joint. With pressure equalisation tube, standard ground cone, standard ground stopcock and retaining device. DIN ISO 4800.
DURAN® bottle head for gas washing bottle. Incl. Filter disc. Porosity 1. Autoclavable at 121°C.
DURAN® Bell Jar. With ground joint neck, for vacuum use.
DURAN® Connection piece. With standard ground cone, 90° angle.
DURAN® Blanks for lids, flat flange. Tall form, ground.
DURAN® Erlenmeyer Flask, with ground joint. With scale (approx. volume / ml), with inscription label, material: DURAN®.
DURAN® Reduction adapters. Socket / cone.
O-Ring Red. FEP coated, not suitable for desiccators. Accessories for flat flange vessels, comprising an elastic, silicone core with seamless FEP coating that encloses the ring. The combination of these high-quality materials achieves good elasticity in conjunction with outstanding chemical resistance.
DURAN® Dropping funnel. Cylindrical, with scale and ground joint. With pressure equalisation tube, standard ground cone, standard ground stopcock and retaining device. DIN ISO 4800.
DURAN® Silicone Septum Seal. VMQ, for piercing. Suitable for PBT screw cap. Thermal resistance: 130°C (steam) / 200°C (heat). Autoclavable.
Plastic Hose Connection. Straight, from PP. With silicone rubber seal (VMQ).
Separating funnel stopcocks. With short inlet, ground, without keys.
Straight valves. Vacuum-tight.
Plastic Hose Connection. PP, complete with screw cap, straight.
90° valves. • vacuum-tight with a leak-rate of <1 x 10-6 mbar x l/s • precise dosing due to fine thread • safety thanks to turning protection
PTFE Hose Connection. Complete with screw cap made of PBT, straight.
DURAN® Flat Flange Reaction Vessel. DN 150. Flange with groove. Pressure and vacuum resistant. Groove for O-ring seal. Glass Type I / neutral glass as per USP, EP and JP. Autoclavable at 121°C.
Separating funnel stopcocks. With short inlet, ground and polished, without keys.
DURAN® KPG stirrer shafts, interchangeable, bearing surface ground and polished, WG 10, 370 mm
DURAN® Buttress. End ground, without groove.
DURAN® Spherical joints, ball. Polished.
DURAN® Blanks for reaction vessels. For DN 150. Important: At a maximum operating temperature of 250°C and at permissible operating pressure, the temperature difference in the glass wall of the flat flange reaction vessels may not exceed 30°C.
Please fill out your contact data and your information request, we will contact you as soon as possible with all requested information.
Please fill out your contact data and your information request, we will contact you as soon as possible with all requested information.
