We offer a wide range of thread adapters. This allows many of our pumps and drain taps to be securely screwed to various containers. By combining different adapters, you will always find the right connection for your application.
Drum pump for solvents with discharge hose and stopcock made of stainless steel / PTFE. The foot operated solvent pump is especially suitable for filling high-purity liquids such as solvents. Filling flammable liquids. All parts that come into contact with the medium are made of stainless steel (1.4301) and PTFE. With the antistatic set from Bürkle, the pump can be grounded when filling flammable liquids so that no electrostatic charge builds up. Protection against dangerous vapors. The container and the pump can be hermetically sealed through the barrel screw connection and the two shut-off cocks. This means that no unwanted vapors can escape after filling. In this way, health and the environment are protected. Robust and practical construction. The solid and durable industrial design of the solvent pump ensures a long service life. The pump works according to the overpressure principle. With the foot bellows, an overpressure is built up in the container, which forces the liquid out of the container. Due to the simple operation of the pump with the foot bellows, both hands remain free for filling. With the practical clip connection, the air hose can be connected and disconnected quickly and easily.
Plastic pipettes are particularly suitable for training purposes, in industrial laboratories, for field investigations and applications in which glass pipettes may not be used, e.g. in fluorine and silicate chemistry.
Electric drum pump for pumping diesel, EL heating oil, undiluted radiator antifreeze and other liquids of hazard class AIII (VbF). The integrated siphon protection prevents leakage if the hose is defective. Available for 230 V. Optionally with standard or self-deactivating automatic nozzle. Electronic flow counter with totalizer and calibration option (uncalibrated) available as an accessory.
The single-headed AirJet Mini diaphragm vacuum pump is suitable for a wide range of applications in laboratories and industry. The dry-running membrane vacuum pump conveys, compresses and evacuates 100% oil-free, thus without falsifying or contaminating, and can also be used as a compressor. AirJet Mini is used to convey and evacuate air and neutral or slightly aggressive or corrosive gases and vapors. The durable membrane is available in two versions, EPDM for general use and PTFE-coated for special applications.
The lever pump is made of polypropylene with a piston rod made of stainless steel V2A (1.4301) and seals made of FKM. With this manual lever pump, required quantities can be withdrawn from barrels without great effort. Ideal for occasional use. Areas of application of the lever pump: water, lubricants, light oils, as well as water-based chemicals and light acids and alkaline solutions.
Plastic pipettes are particularly suitable for training purposes, in industrial laboratories, for field investigations and applications in which glass pipettes may not be used, e.g. in fluorine and silicate chemistry.
One-hand operated hand pump for mains-independent vacuum or pressure generation (e.g. vacuum filtration, sampling, evacuation of desiccators). Maintenance-free, self-lubricating, largely corrosion-resistant. Connection for hoses with 6.4 mm inner Ø. Available in PVC or aluminum for heavy use.
Fine adjustment head for regulating the vacuum. Scaling: 50/100 mbar steps.
The silencer for AirJet Mini is mounted on the pressure side, connection thread G 1/8.
Lever pump for petrochemical substances made of sturdy die-cast aluminum, valves and pistons made of plastic (PA).
PumpMaster for petrochemical liquids. The manual pressure pump is ideal for filling, transferring and emptying canisters and barrels. An overpressure is created by means of a hand piston that pushes the liquid out of the container. The tap also allows small amounts of liquid to be withdrawn. The PumpMaster canister and drum pump is supplied with a flexible and im Variable diameter stopper mounted on the canister. No special thread adapters are required. PumpMaster fits canister openings with a diameter of 46.5 mm to 60 mm. The immersion tube is 95 cm long and can be shortened depending on the size of the container. Complete with three plugs of different sizes Not suitable for hydrochloric acid! Observe the "List of chemical resistances"!
Closing cap 3/4 "for threaded connection on the floor.
Burette with Schellbach stripes according to Schilling / Bürkle with original Bürkle dosing valve. The burette is a universal helper in laboratories, electroplating, water treatment stations, sewage treatment plants, for field investigations, etc. Precise dosing with push button, exact fine titration with micro screw and exact discharge tip. Graduation corresponds to class B (tolerances according to DIN EN ISO 385). • Adjusted to Ex. Burette borosilicate glass 3.3. Resistant to chemicals. Blue ring graduation (Colordur). Can be operated left- or right-handed. Safe stand. Exact discharge tip, finest droplet formation. Parts in contact with the medium: PE, PP, natural rubber, borosilicate glass
Thread adapter 2 "fine thread outside - 3/4" inside.
Dosing pumps suitable for barrels, canisters, balloons or bottles, for dosing liquids of different viscosity. The dosing pumps are installed by you in your existing container closure (see table of mounting holes). To do this, a corresponding hole is drilled in the closure, the pump is pushed through and screwed against from below. A suitable container connection with a mounting hole is not included in the scope of delivery. Wetted parts made of PP, PE and stainless steel.
Plastic pipettes are particularly suitable for training purposes, in industrial laboratories, for field investigations and applications in which glass pipettes may not be used, e.g. in fluorine and silicate chemistry.
Adapter set consisting of: 2 '' coarse thread, Mauser L-ring, green, 2 '' coarse thread v. Leer / Tri-Sure®, brown, 2 '' fine thread steel barrel, blue, DIN 60, Mauser barrel set, black, DIN 51, black Thread adapter set consisting of: 3/4 "Hünersdorff, 3/4" Kautex, 3/4 "cylindrical R 3/4" barrel thread, 3/4 "conical R 3/4" barrel thread, hexagon key for Thread adapter
We offer a wide range of thread adapters. This allows many of our pumps and drain taps to be securely screwed to various containers. By combining different adapters, you will always find the right connection for your application.
For contamination-free removal of organic solvents and flavorings. Suitable for standard laboratory stainless steel drums up to 60 l with R 2 '' fine thread, hand pump for tinplate canisters including adapter for bellows closures (immersion depth 600 mm - infinitely adjustable). Pump is gas-tight and can be completely shut off with two ball valves, parts in contact with the medium stainless steel, seals made of PTFE. Delivery incl. gas-tight barrel screw connection R2 "steel fine thread outside, the discharge of electrostatic charge is carried out via the antistatic set (please order separately). Danger! When filling flammable liquids, the barrel and pump must be earthed! Use the antistatic set!
Please fill out your contact data and your information request, we will contact you as soon as possible with all requested information.
Please fill out your contact data and your information request, we will contact you as soon as possible with all requested information.
