Outlet hose with shut-off valve for PumpMaster for acids and chemical liquids.
The lever pump is made of polypropylene with a piston rod made of galvanized steel and seals made of FKM. With this manual lever pump, required quantities can be withdrawn from barrels without great effort. Ideal for occasional use. Areas of application of the lever pump: water, lubricants, light oils, as well as water-based chemicals and light acids and alkaline solutions.
The solvent pump for tinplate canisters with a bellows seal puts an end to the risky pouring of dangerous substances into other containers. The supplied threaded connection fits on the standard bellows closure - security in the twinkling of an eye! The manual solvent pump is suitable for the contamination-free extraction of organic solvents and aromatic compounds. The hand pump works according to the overpressure principle. With the pump ball, an overpressure is built up in the container, which forces the liquid out of the container. Filling flammable liquids. All parts that come into contact with the medium are made of stainless steel (1.4301) and PTFE. With the help of the antistatic set from Bürkle, the pump can be grounded when filling flammable liquids so that no electrostatic charges can build up. Gas-tight design. The pump can be completely shut off with the two ball valves so that no dangerous vapors can escape after filling. Suitable for various containers. The hand pump for solvents is suitable for containers up to 60 liters. The solvent pump for tinplate canisters has a connection thread for bellows closures.
The battery-powered AccuOne drum pump, with a new and unique hybrid system, offers full flexibility and independence from the power supply. Light, powerful battery with the latest generation of lithium-ion technology, without memory effect, with auto-stop function to protect against total discharge. The new kind of flexibility - one pump, maximum possibilities. The Bürkle drum pumps AccuOne and EnergyOne with a unique hybrid system enable fast, flexible and convenient filling whenever and wherever you want. The pumps are equipped with two different power supply systems: AccuOne, operated with a high-performance battery, or EnergyOne, with a power cord for direct power connection. What's new about it: The supply units are interchangeable! The battery or the power supply unit can be removed using a clip fastener and can be changed quickly and easily. AccuOne can therefore also be operated with the power cord unit, and EnergyOne with the battery. With an exchangeable battery as an accessory, you never have to take a break from charging. The drive can also be easily disconnected from the pumping station using a clip lock. This means that one drive can be used to fill several stationary pumping stations. AccuOne and EnergyOne are designed for applications in which small amounts of liquid can be filled into small containers with narrow openings. The touch panel with dirt, water and dust-proof membrane keypad can control the flow rate from 0.4 l / min to 12 l / min can be regulated continuously and precisely. In addition to the discharge elbow, a flexible discharge hose with a nozzle is optionally available. The light and powerful pumps are made of the high-quality materials PP, PTFE and Hastelloy C for excellent chemical resistance. This means that they are also suitable for filling acids and alkalis. Please note the detailed information on chemical resistance! Do not use in EX areas!
The mains-operated EnergyOne drum pump, with a new and unique hybrid system, offers full flexibility and independence from battery charge. The new kind of flexibility - one pump, maximum possibilities. The Bürkle drum pumps AccuOne and EnergyOne with a unique hybrid system enable fast, flexible and convenient filling whenever and wherever you want. The pumps are equipped with two different power supply systems: AccuOne, operated with a high-performance battery, or EnergyOne, with a power cord for direct power connection. What's new about it: The supply units are interchangeable! The battery or the power supply unit can be removed using a clip fastener and can be changed quickly and easily. AccuOne can therefore also be operated with the power cord unit, and EnergyOne with the battery. With an exchangeable battery as an accessory, you never have to take a break from charging. The drive can also be easily disconnected from the pumping station using a clip lock. This means that one drive can be used to fill several stationary pumping stations. AccuOne and EnergyOne are designed for applications in which small amounts of liquid can be filled into small containers with narrow openings. The flow rate can be continuously and precisely regulated from 0.4 l / min to 12 l / min via the touch panel with its dirt, water and dust-proof membrane keyboard. In addition to the discharge elbow, a flexible discharge hose with a nozzle is optionally available. The light and powerful pumps are made of the high-quality materials PP, PTFE and Hastelloy C for excellent chemical resistance. This means that they are also suitable for filling acids and alkalis. Please note the detailed information on chemical resistance! Do not use in EX areas!
Barrel pump for highly flammable hydrocarbons such as ethanol, gasoline, butanol, isopropanol, kerosene, methanol, etc.
Barrel pump with fixed discharge elbow and stopcock made of PTFE. Due to the high chemical resistance of the wetted materials PTFE and FEP, this drum pump can also be used to fill liquids that are conventional materials such as PP or attack PVC (except elemental fluorine). The barrel pump is also suitable for filling high-purity liquids. The shut-off valve prevents the escape of harmful vapors and the dripping of liquid after filling.
Gas-tight barrel pump with flexible discharge hose for filling into large canisters and containers. Convenient filling as the canister can remain on the floor. The cone neck is held on the container. The gas-tight barrel pump enables odor-free filling. When filling with normal pumps, it is inevitable that vapors get into the environment. This is avoided with the gas displacement method. The vapors produced are returned from the filling container to the filling container via the gas displacement line. The gas line and the liquid line are also provided with shut-off valves. Gas-tight pumps are used for substances with a strong smell such as ammonia. Not suitable for acetone! Danger! When filling flammable liquids, the barrel and pump must be earthed! Use the antistatic set! • Parts in contact with the medium: stainless steel (1.4301), PTFE, nickel-plated brass, electrically conductive PA • Including gas-tight barrel screw connection with 2 “fine thread • For bottle openings of 16–49 mm • Immersion tube Ø 32 mm • The pump can be hermetically sealed with two ball valves
Thread adapter Tri-Sure coarse thread 2 "outside - 3/4" inside.
Peleus ball, simple pipetting aid. The evacuation takes place through an automatic valve. The liquid is sucked in, drained or blown out by pressing on the valves. The removable automatic valve also enables effective internal cleaning.
OTAL® pump for the safe filling of car batteries with acid or distilled water. With hose shut-off valve, with dosing tip for precise filling.
Graduated pipette, transparent, PP, blue graduation
Barrel pump for low-viscosity acids such as hydrochloric acid, phosphoric acid, chromic acid, battery acid, citric acid, etc.
PumpMaster canister pump with FKM seals for acids and chemical liquids. For filling, transferring and emptying canisters and barrels. An overpressure is generated by means of a hand piston, which pushes the liquid out of the container. The tap also allows small amounts of liquid to be withdrawn. The PumpMaster canister and drum pump is mounted on the canister with a flexible stopper that is variably adjustable in diameter. No special thread adapters are required. PumpMaster fits canister openings with a diameter of 46.5 mm to 60 mm. The immersion tube is 95 cm long and can be shortened depending on the size of the container. Scope of delivery: Complete with 3 stoppers in different sizes Not suitable for hydrochloric acid! Observe the "List of chemical resistances"!
Pipette basket for problem-free and gentle cleaning of pipettes according to the suction lifter principle. A complete rinsing system consists of a pipette washer, cleaning container and pipette basket, please order each separately. Heat resistant up to 105 ° C, good chemical resistance. Pipette basket: For holding pipettes up to 600 mm or Mohr burettes. The basket is provided with a handle and a height-adjustable ring. The bottom made of elastic PE reduces the risk of damaging the pipettes. Cleaning container: For pre-cleaning the pipettes Pipette washer: For rinsing the pre-cleaned pipettes. The emptying siphon allows a constant exchange of water. The water supply should be approx. 2 l / min. "
Drum pump for highly aggressive acids and bases, such as sulfuric acid, nitric acid, hydrofluoric acid, sodium hypochlorite etc.
The manual pressure pump is ideal for filling, transferring and emptying canisters and barrels. An overpressure is generated by means of a hand piston, which pushes the liquid out of the container. The tap also allows small amounts of liquid to be withdrawn. The PumpMaster canister and drum pump is mounted on the canister with a flexible stopper that is variably adjustable in diameter. No special thread adapters are required. PumpMaster fits canister openings from 46.5 mm to 60 mm in diameter. The immersion tube is 95 cm long and can be shortened depending on the size of the container. Complete with three plugs of different sizes. Not suitable for hydrochloric acid! Observe the "List of chemical resistances"!
Mini solvent pump for safe filling of small quantities The mini solvent pump is an extremely high-quality hand pump for small containers such as bottles, canisters and containers up to approx. 10 liters. For safe filling and dosing of solvents and highly flammable liquids. Simple principle - great effect The hand pump works according to the overpressure principle. With the pump ball, an overpressure is built up in the container, which pumps the liquid to the outside. Only the hose, delivery pipe and outlet come into contact with the liquid to be filled. A pressure relief valve protects the solvent pump from excessive pressure build-up, e.g. from solar radiation. High quality materials All parts of this hand pump that come into contact with the medium are made of the high-quality and inert materials PTFE and stainless steel (1.4301, 1.4404), which are characterized by their excellent chemical resistance. The Mini solvent pump is therefore particularly suitable for use with high-purity liquids and highly flammable media, e.g. B. acetone, isopropanol, ethanol, methanol etc. Filling in potentially explosive areas The supplied grounding cable can easily be connected to the solvent pump using a bunch plug, electrostatic charges are dissipated and flammable media can be filled safely. Flexible in use The solvent pump can be used for filling from a wide variety of container sizes. The flexible PTFE hose that conveys the liquid out of the container can be shortened to any length. This enables residues to be emptied ideally, even from bottles and canisters with a curved bottom. The hand pump has a GL 45 standard connection thread. With the appropriate thread adapters (accessories), however, it can easily be adapted to containers with thread sizes S 40, GL 38 or GL 32. Precise withdrawal of the liquid The self-closing outlet (with auto-stop function) of the mini solvent pump enables absolutely precise filling without dripping. Thanks to the simple dosing, even the smallest containers, e.g. test tubes, can be filled without any problems. A hose (inside Ø 6 mm) can optionally be attached to the outlet spout so that it can also be safely filled into containers that are further away. Perfectly balanced The Mini solvent pump is particularly compact and very well balanced, which means that it can also be filled from small containers without tipping over. Robust and durable Thanks to its robust design and high-quality materials, the long-lasting Mini solvent pump enables long-term, safe and clean filling in the easiest and most convenient way.
Barrel pump with flexible discharge hose made of PTFE, length 1.2 m and stopcock made of PVDF. Due to the high chemical resistance of the wetted materials PTFE and FEP, this drum pump can also be used to fill liquids that attack conventional materials such as PP or PVC (except for elemental fluorine). The barrel pump is also suitable for filling high-purity liquids. The shut-off valve prevents the escape of harmful vapors and the dripping of liquid after filling.
The titration burette with splinter protection is a rapid operation burette according to Dr. Schilling, with Schellbach stripes, automatic zero point suction and Bürkle dosing valve. A plastic coating of the glass burette increases the breaking strength and serves as a splinter protection. The probability that the burette will break is much lower than with a conventional burette, and should this happen, there are no dangerous splinters. The Bürkle dosing valve enables precise dosing and exact fine titration via the push button or the micro screw as well as an exact discharge via the fine discharge tip. • Adjusted to EX. Borosilicate glass 3.3 burette. Shatterproof, chemical resistant. Safe stand. Exact discharge tip, finest droplet formation. Parts in contact with the medium: PE, PP, natural rubber, borosilicate glass
Please fill out your contact data and your information request, we will contact you as soon as possible with all requested information.
Please fill out your contact data and your information request, we will contact you as soon as possible with all requested information.
