Adapter with seals for connecting MIS instruments to the irrigation system of SONOMIC and TRISON ultrasonic baths.
Dosing pump for canister. Exact and user-friendly removal of cleaning and disinfecting preparations from the canister.
Cooling vessel KG for sonication of temperature-sensitive samples. The cooling jacket allows the temperature to be controlled using liquid coolants during the sonication.
BB 6 sonication cup, is mounted directly on the ultrasonic transducer instead of a horn and sonotrode. Sonication vessels for the indirect sonication of the smallest sample quantities without the entry of metal ions from the sonotrode and no cross-contamination. Sonication beaker BB 6 has an inlet and outlet for temperature control of the samples. Also suitable for direct sonication as an ultrasonic reactor.
The automatic basket movement in the cleaning and rinsing bath of the SONOREX TECHNIK device series supports the cleaning effect of the ultrasound and the loosened dirt is better rinsed off. This enables the ultrasonic cleaning of particularly heavily soiled and encrusted parts. The movement takes place at a lifting speed of 10 strokes per minute and a lifting height of 40 mm.
The planing head holder enables quick and thorough cleaning in the SONOREX TECHNIK ultrasonic bath without subsequent cleaning. With the help of the motorized axle drive, the entire cutting surface is guided through the intensive ultrasonic field. This facilitates the preparation of the planer heads and represents a greatly reduced risk of injury compared to manual cleaning. A suitable planer head holder can easily be retrofitted to an existing SONOREX ultrasonic bath. This leads to significant time and cost savings compared to manual cleaning. Recommended cleaning agent: TICKOPUR TR 13 or for light soiling: TICKOPUR R 33. Features • Quickly cleaned planing heads, without subsequent cleaning • Motorized axle drive • Greatly reduced risk of injury compared to manual cleaning • Easy retrofitting to existing ultrasonic baths • Saves time and money compared to manual cleaning • The frame and planing head mounting axis are made of stainless steel 1.4301 • The diameter of the planing head mounting axis is 1 “(tube: Ø 33.7 × 3.2 mm), other mounting axes with Ø 20 - 50 mm can be used if required but must be provided by the customer and are not included in the scope of delivery • The maximum total load is 80 kg • The speed of the drive roller is approx. 1 rpm.
SONOREX SUPER RK 156 BH high-power ultrasonic cleaining bath for aqueous cleaning solutions Features • Oscillating system • Ultrasonic frequency 35 kHz • Time setting 1 - 15 min, ± 5%, continuous operation (∞) • With adjustable temperature range 30 - 80 ° C • Oscillating tank made of stainless steel • Drain for easier emptying • Operating voltage 230 V ~ (± 10%), alternatively 115 V ~ (± 10%), 50/60 Hz
SONOREX TECHNIK RM 110 High-power ultrasonic bath for aqueous cleaning solutions.The welded oscillating tank made of stainless steel 1.4404, 2 mm guarantees maximum durability even with intensive use. The integrated overflow pocket is used to connect an oil separator to separate cleaned oil films from the cleaning solution.
SONOREX TECHNIK RM 180 High-power ultrasonic bath for aqueous cleaning solutions. The welded oscillating tank made of 2 mm stainless steel 1.4404 guarantees maximum durability even with intensive use. The integrated overflow pocket is used to connect an oil separator to separate cleaned oil films from the cleaning solution.
SONOREX TECHNIK RM 210 High-power ultrasonic bath for aqueous cleaning solutions. The welded oscillating tank made of stainless steel 1.4404, 2 mm guarantees maximum durability even with intensive use. The integrated overflow pocket is used to connect an oil separator to separate cleaned oil films from the cleaning solution.
SONOREX TECHNIK Filtration FA for filtering aqueous liquids for baths with a volume of 13 liters or more The cleaning liquid in the ultrasonic bath, including the sunk particles, is pumped back into the ultrasonic bath via a pre-filter and a fine filter. The pre-filter serves to protect the centrifugal pump from coarse contamination, while the fine filter reliably removes the particles from the cleaning liquid. The wastewater limit values are not fallen below. The filtrations FA 16 to FA 320 each consist of the basic unit FA 610 or FA 620 and the connection set APF for connection to the ultrasonic bath.
SONOREX TECHNIK RM 182 High-power ultrasonic bath for aqueous cleaning solutions. The welded oscillating tank made of stainless steel 1.4404, 2 mm guarantees maximum durability even with intensive use. The integrated overflow pocket is used to connect an oil separator to separate cleaned oil films from the cleaning solution.
SONOREX TECHNIK RM 212 High-power ultrasonic bath for aqueous cleaning solutions. The welded oscillating tank made of stainless steel 1.4404, 2 mm guarantees maximum durability even with intensive use. The integrated overflow pocket is used to connect an oil separator to separate cleaned oil films from the cleaning solution.
SONOREX SUPER RK 514 / RK 514 H high-power ultrasonic cleaining bath for aqueous cleaning solutions Features • Oscillating system • Ultrasonic frequency 35 kHz • Time setting 1 - 15 min, ± 5%, continuous operation (∞) • H-type with adjustable temperature range 30 - 80 ° C • Oscillating tank made of stainless steel • Drain for easier emptying • Operating voltage 230 V ~ (± 10%), alternatively 115 V ~ (± 10%), 50/60 Hz
SONOREX SUPER RK 1028 C high-power ultrasonic cleaining bath for aqueous cleaning solutions Features • Oscillating system • Ultrasonic frequency 35 kHz • Time setting 1 - 15 min, ± 5%, continuous operation (∞) • Oscillating tank made of stainless steel • Drain for easier emptying • Operating voltage 230 V ~ (± 10%), alternatively 115 V ~ (± 10%), 50/60 Hz
SONOREX SUPER RK 1040 high-power ultrasonic cleaining bath for aqueous cleaning solutions Features • Oscillating system • Ultrasonic frequency 35 kHz • Time setting 1 - 15 min, ± 5%, continuous operation (∞) • Oscillating tank made of stainless steel • Drain for easier emptying • Operating voltage 230 V ~ (± 10%), alternatively 115 V ~ (± 10%), 50/60 Hz
SONOREX SUPER RK 1050 high-power ultrasonic cleaining bath for aqueous cleaning solutions Features • Oscillating system • Ultrasonic frequency 35 kHz • Time setting 1 - 15 min, ± 5%, continuous operation (∞) • Oscillating tank made of stainless steel • Drain for easier emptying • Operating voltage 230 V ~ (± 10%), alternatively 115 V ~ (± 10%), 50/60 Hz
SONOREX SUPER RK 1050 CH high-power ultrasonic cleaining bath for aqueous cleaning solutions Features • Oscillating system • Ultrasonic frequency 35 kHz • Time setting 1 - 15 min, ± 5%, continuous operation (∞) • With adjustable temperature range 30 - 80 ° C • Welded oscillating tank made of stainless steel 1.4404.2 mm • Drain for easier emptying • Operating voltage 230 V ~ (± 10%), alternatively 115 V ~ (± 10%), 50/60 Hz
EK 10 spring clamp made of stainless steel for tilt-proof sonication of laboratory flasks in the SONOREX ultrasonic bath. They are attached in hanging baskets and device holders and prevent laboratory flasks from floating or tipping over.
SONOREX ZE 1031 High-power ultrasonic built-in bath with ultrasound from the bottom for aqueous cleaning solutions, consisting of: Oscillating tank, Ultrasound generator GT 503 M-C, Control unit, Foil test frame FT 36.
SONOREX ZE 1058 High-power ultrasonic built-in bath with ultrasound from the bottom for aqueous cleaning solutions, consisting of: Oscillating tank TE 1058.2, Ultrasound generator GT 1003 M-C, Control unit, Foil test frame FT 37.
Basket holder, made of stainless steel, for safe and scratch-free storage of baskets in the SONOREX ultrasonic bath.
The ES 4 beaker holder, stainless steel, serves to hold 4 inset beakers.
MK basket made of stainless steel for material to be sounded.
STAMMOPUR RD 5 is a formula-optimized, alkaline cleaning concentrate for thorough intensive cleaning of dental instruments and devices in the ultrasonic bath. It enables very short ultrasonic cleaning times and is therefore gentle on particularly sensitive instruments. Material compatibility STAMMOPUR RD 5 is suitable for all materials occurring in the dental field. Not suitable for light metals. Features • Concentrate • Very high cleaning effect • High blood dissolving power • Also removes stubborn, dried-on impurities such as blood, secretions, sputum, fats, waxes, tissue residues, filling materials, grinding and polishing residues • For use in an ultrasonic bath • High material compatibility • Biodegradable Instructions for use STAMMOPUR RD 5 is supplied as a concentrate and can easily be diluted with water of at least drinking water quality. Activation additives are not required. The addition of cleaning enhancers and / or disinfecting agents is not permitted Application Cleaning in an ultrasonic bath: 3%, 2 - 10 minutes, 20 - 60 ° C Exposure time depending on the type and stubbornness of the contamination Use without ultrasound: dosage 5%, 20 - 60 ° C When using the ultrasound device, the instructions of the ultrasound device manufacturer must be observed. Ensure that the instrument surfaces are completely wetted. Insert the hollow body so that the air completely escapes from the hollow spaces. After cleaning, rinse parts thoroughly with water of at least drinking water quality or quality according to RKI recommendation and dry. Check instruments for cleanliness and function. Subsequent disinfection, final disinfection or sterilization depending on the classification of the medical device. The working solution must be changed immediately in the case of visible, coarse soiling, otherwise every day at the latest. Disinfect the oscillating tank after emptying it to avoid cross-contamination. Hazard warnings H315 Causes skin irritation. H318 Causes serious eye damage. Safety instructions P280 Wear protective gloves / protective clothing / eye protection / face protection. P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes.
GV 3 handle adjustment made of stainless steel. With the handle adjustment, the immersion depth of the baskets can be continuously regulated, no floating, tilting or flooding of the laboratory flasks. Quick and easy to attach to hanging baskets and device holders.
TB drop plate, made of stainless steel, to cover the space between two tanks.
Standard horn, used to produce stable mixtures of non mixable or hardly mixable liquids, different vessels with standdard ground can be connected via adapters NA to the external thread of the horn. A standard horn (SH) with its concentrating design amplifies the amplitude generated by the ultrasonic transducer. The standard horn is provided with an internal thread for mounting a sonotrode. The external thread is used for the pressure-tight connection of sonication vessels. Separate adapters are available depending on the sonication vessel.
FZ 5 G flow-through standard horn for the production of stable mixtures otherwise immiscible or difficult to mix liquids. Various standard ground joint vessels with NA adapters can be connected to the external thread and combined to form a highly effective ultrasonic reactor for continuous operation. Two different media can be continuously sonicated and homogenized by feeding the premixed substances directly into the cavitation field.
Booster horn, with external thread for connection of different vessels by the use of adapters NA A booster horn with its slightly expanded shape amplifies the amplitude generated by the ultrasonic transducer. The booster horn has an internal thread for mounting a sonotrode. The external thread is used for the pressure-tight connection of sonication vessels. Separate adapters are available depending on the sonication vessel.
FZ 7 G flow-through booster horn The flow-through standard or booster horn is used to produce stable mixtures of liquids that are otherwise immiscible or difficult to mix (oil / water). Two different media can be continuously sonicated and homogenized by feeding the premixed substances directly into the cavitation field. Various vessels can be connected to the external thread and combined to form a highly effective ultrasonic reactor for continuous operation. Depending on the sonication vessel, simultaneous cooling of the reactor can be implemented.
Kugelhahn G ½ kpl. für Ultraschallbad RK 510 H / RK 512 H
Please fill out your contact data and your information request, we will contact you as soon as possible with all requested information.
Please fill out your contact data and your information request, we will contact you as soon as possible with all requested information.
