IDP-3 tip seal kit for IDP Oil Free Vacuum Pump
Tip seal replacement kit, for IDP-10 vacuum pump
Tip seal kit, IDP-10, includes tip seals, tools, cloth, swab, face mask, nylon gloves, filter element, and a manual.
IDP3 tip seal maintenance kit, includes tip seal, silencer filter element, face mask, lint free cloth, gloves, and hex keys
Universal bushing - Additional universal bushing, small flange DN 40 with blind flange, for positioning sensors or supply lines in the chamber
Vacuum pump connection kit - for vacuum pump VAP1 and VAP2; consisting of aluminum clamping ring, universal centering ring, small flange with hose nozzle (2.5 m), rubber hose and 2 hose clamps
Vacuum pump connection kit (ATEX) - for vacuum pump VAP 5, consisting of 1.5 m metal hose, clamping ring, inner centering ring and protective covers
Interior lighting - LED light strips, left and right in the door
Object temperature measurement - with flexible Pt100 sensor and digital object temperature display
Pump cabinet with vacuum pump VAP 1 - Pump cabinet for vacuum pumps, with switchable socket. Chemical diaphragm pump with a nominal pumping speed of 2.0 m³/h, final pressure of 7 mbar, including all necessary vacuum connection parts
Pump cabinet with vacuum pump VAP 2 - Pump cabinet for vacuum pumps, with switchable socket. Chemical diaphragm pump with a nominal pumping speed of 4.0 m³/h, final pressure of 1.8 mbar, ATEX compliance: II 3G IIC T3 X (only for the interior, media-touched areas), including all necessary vacuum connection parts
Pump cabinet with vacuum pump VAP 5 - Pump cabinet for accommodating vacuum pumps including chemical diaphragm pump VAP 5 with nominal pumping speed of 3.6 m³/h, final pressure 3 mbar, with separator and emission condenser, suitable for flammable solvents and vacuum pump connection kit (ATEX).
RS 232 interface - RS 232 connection cable, 3 m for vacuum controller in connection with speed-controlled vacuum pump (VP 3.1)
Analog output 4-20 mA for temperature and pressure values (output not adjustable)
Touchscreen controller - Large display field with intuitive operation, actual and target values of the most important process parameters are shown on the display at the same time. In addition, the graphical temporal evaluation of the process parameters is possible
PVDF hose (Teflon) 8x315 (Rotavac Valve Control)
Vacuum Pump Rotavac Valve Tec - 230V 50/60Hz - EU-plug
Vacuum Pump Rotavac Valve Tec - 100-120V 50/60Hz - US-plug
Front foil for Rotavac Valve Tec
Hose connector Y-type Ø 8mm
Woulff bottle - Hei-VAP 2019 For separating condensate to protect the valves of the vacuum pump, standard vacuum laboratory bottles can be used. Screw connection for easy emptying and cleaning, compatible with all Hei-VAP configurations, volume of 200 ml
Hei-VAC Control For precise vacuum control of house vacuum or valve-controlled vacuum pumps. • Entry-level model for digital vacuum control • Easy to install on the chiller support rod or as a “stand-alone” unit next to the evaporator • Ventilation button to stop foaming • Graphic display of the entire vacuum process • Control valve already included in the scope of delivery • RS 232 interface • Multilingual menu navigation • Compatible with all Hei-VAP rotary evaporators that do not have an integrated vacuum control Complete with integrated ceramic membrane vacuum sensor, control valve and vent valve. With plug-in power supply, ready for use, with instructions. Technical specifications: Pressure sensor: integrated Upper measurement limit: 1080/810 mbar/torr Measuring principle: ceramic membrane (aluminum oxide), capacitive, gas-independent, absolute pressure Measuring accuracy: < +- 1 mbar/hPa/torr / +- 1 digit (after adjustment, constant temperature) Permitted Ambient temp. range operation: 10 – 40 °C Max media temp. for continuous operation / short-term: 40/80 °C Material outer housing: Stable plastic housing with good chemical resistance Degree of protection IEC 60529: IP 20 Degree of protection IEC 60529 - residue pump: IP 42 cable length ext. Power supply : 2 m Dimensions (W/D/H): 144 x 115 x 124 mm Weight: 0.44kg"
PCB Power supply (Rotavac Vario Control / Tec / Pumping Unit)
Required to control vacuum for Hei-VAP Control models with valve-controlled vacuum pumps. Can be positioned for easy access and cleaning. Not required for manual vacuum control
Seal kit (Rotavac Valve Control)
Sound absorber for ROTAVAC vacuum pumps
Woulff bottle (old Hei-VAP series)
Drainage set (Hei-CHILL Peltier)
Hose set insulated with unilateral fitting 2x2m (Hei-CHILL Peltier)
Hose set with unilateral fitting 2x2m (Hei-CHILL Peltier)
Cap for Woulff bottle
Dirt filter mat (Hei-CHILL Peltier)
Repair Kit Rocker 320 Compressor Repair Kit Includes: On/Off Switch / Valve Plate / Air Intake Filter / Moisture Trap & Drain Valve / Filter Cartridge / Piston Set
Repair Kit for Rocker 400 (for PPS cylinder block) Includes: 1 on/off switch; 1 moisture trap with drain valve; 2 air filters [air outlets]; 4 rubber valve plates; 1 Prote filter cartridge [overflow protection] for Rocker 300/400/410/430; 2 connecting rod sets; and 2 O-rings
Repair Kit for Rocker 410 (new cylinder block) Includes: 1 on/off switch; 1 moisture trap with drain valve; 1 air filter [air outlet]; 4 rubber valve plates; 1 Prote filter cartridge [overflow protection] for Rocker 300/400/410/430; 2 connecting rod sets; and 2 O-rings
Repair Kit for Rocker 600 Includes: 1 on/off switch; 1 moisture trap with drain valve; 2 air filters [air outlets]; 4 valve plates; 1 Prote filter cartridge [overflow protection] for Rocker 600/610; 2 piston sets; and 2 O-rings
Repair Kit for Chemker 300 Includes: 1 on/off switch; 1 diaphragm; 1 spring; 2 valve plates; and 3 O-rings
Repair Kit for Chemker 400 Includes: 1 on/off switch; 2 diaphragms; 2 springs; 4 valve plates; and 11 O-rings
Repair Kit for Chemker 410 Includes: 1 on/off switch; 2 diaphragms; 2 springs; 4 valve plates; and 6 O-rings
Conversion Kit for Rocker 300/500 to 320/520 Includes: 1 hex spanner #10; 1 hex spanner #12; 1 L-type hex Allen key #3; 1 L-type hex Allen key #5; and 1 moisture trap/vacuum regulator for Rocker series compressor
Conversion Kit for Rocker 400 to 420 Includes: 1 hex spanner #10; 1 hex spanner #12; 1 L-type hex Allen key #3; 1 L-type hex Allen key #5; and 1 moisture trap/vacuum regulator for Rocker series compressor
Conversion Kit for Rocker 600 to 620 Includes: 1 hex spanner #14; 1 hex spanner #16; 1 L-type hex Allen key #5; 1 L-type hex Allen key #6; and 1 moisture trap/vacuum regulator for Rocker series compressor
Repair Kit for Rocker 610 Includes: 1 on/off switch; 1 moisture trap with drain valve; 1 air filter [air outlet]; 4 valve plates; 1 Prote filter cartridge [overflow protection] for Rocker 600/610; 2 piston sets; and 2 O-rings
O-rings. Made of nitrile, for "RODAVISS".
Please fill out your contact data and your information request, we will contact you as soon as possible with all requested information.
Please fill out your contact data and your information request, we will contact you as soon as possible with all requested information.