Wagner & Munz GmbH makes use of Cookies
to be able to adapt the website to the needs of our users. If you continue using this page, you agree that cookies can be used for this purpose. Click here for further information.Accept
Designed for careful and protective mixing of cell suspensions and culture broths, developed for highest demands as well as warming-free and uncompromising continuous operations for e.g. in CO2-incubators.
Warming- and maintenance-free magnetic stirrer with 3 stirring points, large surface, also suitable for viscous culture media.
Maintenance-free 2mag-stepper-motor-drive for extremely slow and 100% jerk-free and gentle mixing of cell cultures, extended speed range from 5 up to 250 rpm, jerk-free, even and smooth stirring also at slow speeds, suitable for culture fl asks with spinning propeller- and spinning ball systems.
Fully encapsulated and hermetically closed stainless steel housing, IP68, water-, dust- and germ-proof, extremely robust construction and performance, easy to clean and maximum firm, submersible in water baths, designed for the warming-free long term operation in CO2-incubators, individual measurements on request.
Interfaces 0-10 volts, calibrateable 4-20 mA for process control systems, RS232, USB, Ethernet, rotation monitoring and firmware adaptions on request.
3 years warranty on material and manufacturing, developed and made in Germany.
Please order control unit bioMIXcontrol separately!
Stirring points: 3
Stirring point distance: 140 mm
Stirring volume: 5 – 5,000 ml
Speed range: 5 – 250 rpm
Stirring power/position: 5 watts
Material housing: Stainless-steel
Measurements(WxDxH): 130 x 410 x 38 mm
Weight: approx. 3.5 kg
Permitted operation conditions: -10 up to +50 °C (at 100% humidity) resp. +50 °C submersed in water
Permitted storage conditions: -40 °C up to +70 °C, 10 – 95 %, 500 - 1060 hPa
Protection category: IP 68
Control unit -stackable- for 2mag bioMIXdrive series, developed for the hard daily lab use and uncompromising warming-free continuous operation.
Control unit for the connection of 1 stirring drive bioMIXdrive 1, 2, 3 or 4 with 6 watts/stirring point, without any own-generated heating effect, extended speed range from 5 to 250 rpm, jerk-free stirring, even and smooth stirring also at slow speeds.
Power setting (10-steps) for high power with regard to large and viscous stirring amounts and reduced power for the warming-free continuous operation e.g. in CO2-incubators.
Digital display for speed- and power setting, SoftStart for reliable and safe accelerating of stirring bar, QuickSet for quick setting of start- and maximum speed, storage of last working status when turning off, firm stainless steel housing, easy to clean.
Interfaces 0-10 volts, calibrateable 4-20 mA for process control systems, RS232, USB, Ethernet, rotation monitoring and firmware adaptions on request.
3 years warranty on material and manufacturing, developed and made in Germany.
Speed range: 5 – 250 rpm
Stirring power (max.): 4 – 40 watts (10-step)
Material housing: Stainless-steel
Measurements (WxTxH): 215 x 120 x 57 mm
Weight approx.: 1.9 kg
Permitted operation conditions: 0 up to +40 °C (at 80% humidity)
Protection category: IP 20
Electrical data: 100-240 V/50-60 Hz/1.5 A
Stainless steel bath, durable, robust, easy to clean, suitable for MIXdrive 1/6/15/60 as well as MIXdrive 1 XS/1 eco, fitting for immersion thermostats (heating/cooling), easy to clean, even weld and electro-polished, framed ridge formed as handle, exact positioning of the stirrer in the case of use the stirrer under the bath, stirring point mark inside the bath, left-/right stop for optimized thermostat positioning (circulation pump) for use with MIXdrive 6 resp. MIXdrive 15.
Inner Dimensions (WxDxH): 277 x 537 x 175 mm
Outer Dimensions (WxDxH): 315 x 575 x 190 mm
Weight: approx. 6.0 kg
Stirring bar, new developed, high-effective, ideal for viscous media, stirring over wide distances or for disadvantageous vessel bottoms.
More than 4x higher torque transmissible, unbeatable increased mixing effect in comparison to conventional stirring bars, high energetic and long-term stable magnetic field, no demagnetization effect, concave design for a minimum of bearing surface and reliable rotation, triangular shape for powerful shear force, better mixing effect at lower rotation speed.
300% less PTFE abrasion than comparable round shape stirring bars, significantly higher rotation speed reachable, high quality, even and sealed PTFE cover, FDA-conform, steam sterilizable at 121°C.
Multiple improved performances for all types of magnetic stirrers.
Shape: triangular, concave
Cover material: PTFE
Dimension (DxL): Ø 15 x 24 mm
Weight: approx. 0.02 kg
Stirring bar, new developed, high-effective, ideal for large mixing volumes, viscous media, stirring over wide distances or for disadvantageous vessel bottoms.
More than 4x higher torque transmissible, unbeatable increased mixing effect in comparison to conventional stirring bars, high energetic and long-term stable magnetic field, no demagnetization effect, concave design for a minimum of bearing surface and reliable rotation, triangular shape for powerful shear force, better mixing effect at lower rotation speed.
300% less PTFE abrasion than comparable round shape stirring bars, significantly higher rotation speed reachable, high quality, even and sealed PTFE cover, FDA-conform, steam sterilizable at 121°C.
Multiple improved performances for all types of magnetic stirrers.
Shape: triangular, concave
Cover material: PTFE
Dimension (DxL): Ø 39 x 70 mm
Weight: approx. 0.3 kg
