Gas distributor, PTFE. With the finest bores (4 x Ø 0.4 mm) for even pearling of the flowing through gas, whereby only a low pre-pressure is required. Suitable for the gas washing bottles and columns with thread M8x1, as well as for the gas inlet pipes.
Pore-free basket with a mesh size of approx. 1.0 x 1.0 mm in the bottom, fixed handle. Applications: For washing, rinsing or immersion of solids in aggressive or pure substances.
Drip funnel made of transparent FEP, fine metering tap with ground joint core NS 29/32 made of PTFE. Integrated Combi-Nut (Safe-Lab) for easy securing and loosening the conical joint.
2 ground joint cores NS 29/32 and 1 vertical connection with flexible seal made of PTFE / silicone and a screw cap made of PPS to fix Thermometers with an outer diameter of 7-8 mm. Integrated combi nut (Safe-Lab) for easy securing and loosening of the conical joint.
Core and sleeve NS 29/32, as well as sleeve NS 19/26 e.g. for vacuum valve. Integrated combi nut (Safe-Lab) for easy securing and loosening of the conical joint.
Thin-walled cooling tube made of translucent, gas-tight PFA, cooling jacket made of borosilicate glass, incl. PP olives GL 14 outer Ø 9 mm for cooling water connection, ground joint sleeve and ground joint core NS 29/32 made of PTFE. The flowing distillate only comes into contact with PFA and PTFE. Integrated combination nut (Safe-Lab) for easy securing and loosening of the conical ground.
One-piece cooling tube with ground joint sleeve and ground joint core NS 29/32 made of PTFE, cooling jacket made of borosilicate glass, incl. PP olives GL 14 outer Ø 9 mm for cooling water connection. The flowing through distillate only comes into contact with PTFE. Integrated Combi-Nut (Safe-Lab) for easy securing and loosening the conical joint.
Thin-walled cooling tube made of translucent, gas-tight PFA, outer cooling jacket made of borosilicate glass, incl. PP olives GL 14 outer Ø 9 mm for cooling water connection, ground joint sleeve and ground joint core NS 29/32 made of PTFE. The flowing distillate only comes into contact with PFA and PTFE. Suitable for vertical installation. Integrated Combi nut (Safe-Lab) for easy securing and loosening of the conical joint.
Flask thermometer. PTFE-encased glass thermometer. Measuring range 0/+250:1 °C.
Distillation thermometer. PTFE-coated glass thermometer, adjusted for 50 mm immersion depth. Length 300 mm, measuring range 0 / + 250: 1 ° C.
SBW glass flat-head stopper. Short.
DURAN® Round Bottom Flask, with standard ground joint. With inscription label, material: DURAN®. Thanks to the uniform wall thickness, round bottom flasks are ideal as heating vessels. The geometry permits very uniform heating.
Distillation spinning with sleeves for rotary evaporators Hei-VAP series
Bush for overheat protection switch
Power cord for (RotaChill Small) - 230V
Distillation spider with 5 flasks standard cut is NS 29/32. Accessories for rotary evaporators
Control knob (Hei-VAP Bench-top)
Gas pressure spring Lift for large rotary evaporator
Capacitor Motor (Laborota 20)
Please fill out your contact data and your information request, we will contact you as soon as possible with all requested information.
Please fill out your contact data and your information request, we will contact you as soon as possible with all requested information.
