3M™ Petrifilm™ Enterobacteriaceae Count Plates enumerate coliform bacteria plus potential pathogens and detect contamination - in the environment - in food samples. This plate is used to enumerate all coliform bacteria as well as potential pathogens e.g. B. Salmonella, Shigella and Yersinia. - Ready for immediate use - 90% less material volume - Validated methods - Time and energy saving - Increased productivity and reliability - lower operating costs - Fast and reliable evaluation Recommended Industry: Seafood, Prepared & Processed Foods, Beverages & Bottled Water, Dairy, Egg Products, Fruit & Vegetables, Meat, Nutritional Supplements, Small Animal & Livestock Feed, Poultry Packing unit 2 x 25
3M™ Petrifilm™ Enterobacteriaceae Count Plates enumerate coliform bacteria plus potential pathogens and detect contamination - in the environment - in food samples. Quickly identify potential sources of contamination with 3M™ Petrifilm™ Enterobacteriaceae Count Plates. This plate is used to enumerate all coliform bacteria as well as potential pathogens e.g. B. Salmonella, Shigella and Yersinia. Suggested Ranges: Seafood, Prepared & Processed Foods, Beverages & Bottled Water, Dairy, Egg Products, Fruit & Vegetables, Meat, Nutritional Supplements, Small Animal & Livestock Feed, Poultry
The Letheen Broth tube is ready to use to test environmental samples for pathogens. The swab can be used to take samples from corners and hard-to-reach areas. Pack of 100. Recommended Industry: Baked Goods, Egg Products, Fish & Seafood, Meat, Poultry, Grains & Oilseeds, Beverages & Table Water, Small Animal & Livestock Feed, Dairy Products, Food Supplements, Fruits & Vegetables, Confectionery, Prepared & Processed Foods Microorganism type: Total aerobic count, Campylobacter, E. coli, Listeria monocytogenes, lactic acid bacteria, Salmonella, environmental listeria
3M™ Petrifilm™ Coliform Bacterial Count Plates are ready to use for the detection of coliform bacterial cultures in – raw materials – prepared/finished food products – production environment/equipment Detected coliform bacteria are red colonies associated with gas bubbles. Results already within 22 hours. - Ready for immediate use - 90% less material volume - Validated methods - Time and energy saving - Increased productivity and reliability - lower operating costs - Fast and reliable evaluation Recommended Industry: Dairy, Fruit & Vegetables, Meat, Small Animal & Livestock Feed, Seafood, Beverage & Bottled Water, Egg Products, Nutritional Supplements, Poultry, Bakery, Confectionery Storage temperature: Store at temperatures less than or equal to 8°C Packing unit 40 x 25
3M™ Swab Sampler, RS96010LET, 10 mL Letheen Broth. The Letheen Broth tube is ready to use and can be used to test environmental samples for pathogens. The swab can be used to take samples from corners and hard-to-reach areas. The bottles offer large head space to hold the sample and shake vigorously. Pack of 100. Recommended industry: Bakery products, chemicals, egg products, fish and seafood, meat, poultry, grains & oilseeds, beverages and table water, small animal & livestock feed, dairy products, food supplements, fruits and vegetables, confectionery Microorganism type: Total aerobic count, Campylobacter, Coliform bacteria, E. coli, Enterobacteriaceae, yeast and mold, Listeria monocytogenes, lactic acid bacteria, Salmonella, Staphylococcus aureus, environmental listeria
3M™ Petrifilm™ Yeast and Mold Count Plates identify yeast and mold in food products and the food processing environment. Yeasts are easily distinguished from molds on the plate: - Yeasts are usually identified by small, blue-green colonies with defined borders and no foci. – Molds are recognizable by large, multicolored colonies with diffuse edges and focus in the center. Recommended Industry: Baked Goods, Beverages & Bottled Water, Confectionery, Meat, Nuts, Poultry, Supplements, Sauces & Condiments, Dairy, Egg Products, Fruit & Vegetables, Grains & Oilseeds, Fish & Seafood Storage temperature: Store at temperatures less than or equal to 8°C Results: In 3 to 5 days Packing unit: 2 x 50 (6407)
3M™ Swab Sampler with 1mL Letheen Broth RS9601LET The 3M™ Swab Sampler with 1mL Letheen Broth is a convenient and rapid sampling device for environmental sampling and small surface area testing. Disposable sample template for beef/pork for 100 qcm. Pack of 100. Features - The tube of Letheen Broth is ready to use and can be used to test environmental samples for pathogens - The swab can be used to take samples from corners and hard-to-reach areas - Convenient design contributes to a consistent sampling process among technicians and equipment - The bottles offer a large headroom to hold the sample and to shake it vigorously - Tubed swab for increased productivity and efficiency Recommended Industry: Baked Goods, Chemicals, Egg Products, Seafood, Meat, Poultry, Grains & Oilseeds, Beverages & Bottled Water, Small Animal & Livestock Feed, Dairy, Nutritional Supplements, Fruit & Vegetables, Confectionery, Prepared & Processed Foods Microorganisms Type: Total aerobic count, Campylobacter, coliform bacteria, E. coli, Enterobacteriaceae, yeast and mold, Listeria monocytogenes, lactic acid bacteria, Salmonella, Staphylococcus aureus, environmental listeria
The 3M™ Petrifilm™ Staph Express Disc can be used to confirm Staph. aureus in suspect colonies when there is a significant background microbial load in samples. Used when there is a significant background microbial load in Staph tests. This disc used to confirm (ital)S.aureus(/ital) in suspect colonies. Recommended Industry: Grains & Oilseeds, Nutritional Supplements, Dairy, Fruits & Vegetables, Meat, Small Animal & Livestock Feed, Fish & Seafood, Egg Products, Baked Goods, Confectionery, Poultry Storage temperature: Store at temperatures less than or equal to 8°C
3M™ grease test strips LRSM 200. Rapid test strips for determining grease quality. Fast results, just 15-30 seconds after immersing in the hot fat. Suitable for all common deep fryers and types of fat/oils.
3M™ Petrifilm™ Staph Express Count Plates are used for the detection of Staphylococcus aureus. Proven Staph. aureus appear as prominent red-purple colonies. When there is a significant background microbial load in Staph testing, the 3M™ Petrifilm™ Staph Express Disk can be used to detect Staph. aureus in suspect colonies. - Ready for immediate use - 90% less material volume - Validated methods - Time and energy saving - Increased productivity and reliability - lower operating costs - Fast and reliable evaluation Recommended Industry: Egg Products, Fruit & Vegetables, Grains & Oilseeds, Baked Goods, Confectionery, Dairy, Meat, Small Animal & Livestock Feed, Poultry, Prepared & Processed Food, Nutritional Supplements, Seafood Storage temperature: Store at temperatures less than or equal to 8°C
3M™ Petrifilm™ Select Selected E. coli Bacteria (SEC) Count Plates are specifically designed for E. coli bacteria. Only E. coli colonies are visible. 3M™ Petrifilm™ Select E. coli Count Plate (SEC) is a ready-to-use culture medium system containing selective substances, nutrients, a cold-water-soluble gelling agent, and an indicator of glucuronidase activity, 5-bromo-4-chloro-3-indolyl -β-D-glucuronide (BCIG), which facilitates colony counting. Petrifilm SEC plates are used in the food and beverage industry for enumeration of Escherichia coli bacteria. The components of the Petrifilm SEC Plate are decontaminated but not sterilized. 3M Microbiology is ISO (International Organization for Standardization) 9001 certified. Most E. coli strains are thermotolerant and produce beta-glucuronidase, an enzyme that reacts with the BCIG indicator in Petrifilm SEC plates to produce dark green to blue-green colonies. Warning: Do not use this plate to detect E. coli O157. Like most other E. coli media, this plate does not specifically indicate the presence of an O157 strain. Because most O157 strains are atypical E. coli, e.g. they do not produce glucuronidase enzymes and blue-green coloration, they are not recognized by the Petrifilm SEC plate. Recommended Industry: Fruit & Vegetables, Seafood, Meat, Prepared & Processed Foods, Poultry & Eggs, Dairy Storage temperature: Store at temperatures less than or equal to 8°C Packing unit = 20 x 25
3M™ Buffered Peptone Water Broth 500g ISO BPW500 For use in the detection of Salmonella and E. coli O157 (including H7). Reduces enrichment times, allowing for a shorter time to result with improved growth and recovery of organisms. A single enrichment broth capable of testing for both Salmonella and E. coli O157 (including H7). Complies with ISO 6579 formulation. Recommended for: Bakery products, chemicals, egg products, fish and seafood, meat, poultry, grains & oilseeds, beverages and table water, small animal & livestock feed, dairy products, food supplements, fruit and vegetables, confectionery Microorganisms Type: E. Coli O157 (including H7), Salmonella
Petrifilm Aerobic Count Plates, packing unit 2 x 50
3M™ Swab Sampler with 4 ml neutralization buffer swab system for environmental samples and small surfaces. Pack of 100. Sampling is easy with the included swab and the tubes have a large headspace to accommodate the sample and vigorously mix to dislodge the organisms from the swab. This sampler is decontaminated by gamma radiation to ensure long shelf life. The 3M Swab Sampler is made in the USA and is certified to the ISO 9001:2008 quality assurance standard. The sampler is intended for laboratory use only. HACCP (Hazard Analysis Critical Control Point) is the food safety quality management protocol most widely accepted worldwide. 3M sampling products are an essential part of this approach to identifying potential hazardous substances in food and determining their precise location. Portability, stable enrichment media, and easy-to-use swabs and sponges are designed to test a wide range of potential hazards and deliver exceptionally accurate results. They are designed to allow samples to be transported safely from the collection point to the laboratory without leaks or sample degradation. The use of neutralization buffer is recommended for surface testing to detect microorganisms that may occur on dairy or food processing equipment disinfected with chlorine or quaternary ammonium compounds. It can neutralize the bactericidal and bacteriostatic effects of chlorine and quaternary ammonium compounds. Neutralizing these chemicals is crucial for the accurate detection of these potentially harmful microorganisms. Neutralization buffers are used and recommended in the microbiological examination of surfaces in standard methods for testing dairy products, as well as for the pretreatment and decontamination of mycobacterial samples. Recommended industry: Bakery products, chemicals, egg products, fish and seafood, meat, poultry, grains & oilseeds, beverages and table water, small animal & livestock feed, dairy products, food supplements, fruits and vegetables, confectionery Media type: neutralization buffer Microorganisms Type: E. Coli O157 (including H7), Listeria monocytogenes, Salmonella, environmental listeria
Dipslides nutrient + TTC/malt - Easy-to-use indicator for the detection of bacteria, yeast and mold in liquids and on surfaces, pack of 10
Demonstrably cost-effective tool for detecting environmental listeria. Quantitative results enable hotspots to be identified in the facility and tracking of Listeria control gains achieved over time. Fast results within 27 to 31 hours after sampling. 3M™ Petrifilm™ Environmental Listeria Plate is designed for the detection of Listeria in environmental samples. A ready-to-use culture medium containing selective substances, nutrients, a cold-water soluble gelling agent and a chromogenic indicator. This plate is intended for analysis of environmental samples and can contribute to more efficient monitoring of facility cleaning.
The 1.5" x 3" (3.8cm x 7.6cm) dry sponge can be used with a variety of buffering and enrichment media and in dry environments. The simple packaging makes handling and preparation easier and reduces waste. The sampler is intended for laboratory use only. Features - The sponge is biocide-free and does not affect the viability of organisms - Includes 5" x 9" printable sample bag for safe, convenient transport to the lab - Decontaminated by gamma irradiation to ensure aseptic conditions Recommended industry: Bakery products, chemicals, egg products, fish and seafood, meat, poultry, grains & oilseeds, beverages and table water, small animal & livestock feed, dairy products, food supplements, fruits and vegetables, confectionery Microorganisms Type: E. Coli O157 (including H7), Salmonella, environmental listeria
3M™ Pollution monitor 3500+ Pollution monitors for collecting gases and vapours in the ambient atmosphere. Ideal for detecting pollutant concentration in the workplace. The 3M™ Pollution monitor is equipped with a single charcoal adsorbent wafer that binds pollutants in the air by means of diffusion. - Suitable for personal and area monitoring - Easy to use: the pollution monitor can simply be clipped onto clothing - Small and lightweight
3M™ Hydrated Sponge with 10ml Letheen Broth and Gloves HS10LET2G. Ready-to-use, moistened sponges for easy and convenient sampling of environmental and food samples. This biocide-free cellulose sponge is moistened with Letheen broth dilution to facilitate sampling. The biocide-free cellulose sponge only affects the viability of the microorganisms for Salmonella and E. coli bacteria after 48 hours of refrigerated storage and for Listeria only after 72 hours. The scope of delivery includes two one-size-fits-all polyethylene gloves, which increase safety and make germ-free handling easier. The cellulose material is robust, absorbent and can absorb and release the sample without dripping unnecessarily. The sponge comes with a 5" x 9" 3M™ sample bag with a capacity of 0.89L/30oz that allows the sponge to be safely and conveniently transported to the laboratory. The bag is double laminated to ensure stability, puncture resistance and tear resistance during mixing and transport. Cable ties ensure a secure closure and the blue top edge and large white writable area make the bag easy to identify. The writable area is ideal for documenting test data, sample collection date, time and other information, facilitating accurate record keeping and easy identification. Sample bags and sponges are decontaminated using gamma radiation to preserve the viability of the organisms and ensure a long shelf life. This product is made in the USA with materials purchased abroad and is certified to the ISO 9001:2008 quality assurance standard. The sampler is intended for laboratory use only. Recommended Industry: Baked Goods, Chemicals, Egg Products, Food & Catering, Fish & Seafood, Meat, Poultry, Poultry & Eggs, Grains & Oilseeds, Beverages & Table Water, Small Animal & Livestock Feed, Dairy Products, Food Supplements, Fruits & Vegetables, Confectionery, Water Testing, Prepared & processed foods Microorganism Type: Total aerobic bacteria count, coliform bacteria, Enterobacteriaceae, yeast and molds, lactic acid bacteria, Staphylococcus aureus, environmental listeria
The sample distributor is used to evenly distribute the sample on 3M™ Petrifilm™ Staph Rapid Count Plates. For use with 3M™ Petrifilm™ Aerobic Total Plates, 3M™ Coliform Count Plates, 3M™ Rapid Coliform Count Plates, 3M™ Enterobacteriaceae Count Plates and 3M™ E. coli Count Plates. Minimum order quantity: 50 pcs.
Please fill out your contact data and your information request, we will contact you as soon as possible with all requested information.
Please fill out your contact data and your information request, we will contact you as soon as possible with all requested information.
