Filter sample preparation

Your filters:
165 Found products
Products per page

738638 - CHROMABOND Multi 8-Verschlußkappen

Macherey-Nagel GmbH & Co. KG / Filter Probenvorbereitung

8-well strip sealing caps for PP tube strips 

28.80 €

738639.M - CHROMABOND Multi 96 Auffangtank, Monoblock

Macherey-Nagel GmbH & Co. KG / Filter Probenvorbereitung

CHROMABOND Multi 96 reservoir tank monoblock, PP pack of 2

27.80 €

738645 - CHROMABOND Multi 96 But/PTFE-Matte

Macherey-Nagel GmbH & Co. KG / Filter Probenvorbereitung

CHROMABOND Multi 96 rubber pad butyl rubber, one side covered with PTFE dimensions: 125 x 85 x 1.3 mm

26.20 €

738630.M - CHROMABOND Multi 96 Vakuumkammer

Macherey-Nagel GmbH & Co. KG / Filter Probenvorbereitung

CHROMABOND MULTI 96 vacuum manifold for 96 well monoblocks with reservoir tank, 3 spacer pairs, vacuum gauge, control valve, butyl rubber pad covered with PTFE material: PP

900.00 €

Spritzenfilter mit Luer Lock Inlet

Restek / Filter Probenvorbereitung

Syringe Filters with Luer Lock Inlet • Luer lock inlet offers leak-tight syringe connection • Variety of filter types, porosities, and diameters • Color coded for easy identification • Rugged polypropylene housing • Autoclavable to 121 °C for 15 minutes • Quantity break pricing for greater savings

123.00 €

Thomson SINGLE StEP Standard-Filterfläschchen

Restek / Filter Probenvorbereitung

Thomson SINGLE StEP® Filter Vials • Easy-to-use vials offer fast sample filtration and require only a squeeze of your fingers. • Color-coded caps allow easy identification of 0.2 μm or 0.45 μm membranes in PVDF, PTFE, PES, or nylon. • Pre-slit PTFE/silicone caps help eliminate broken autosampler needles and cored septa. • Low dead volume units feature rugged polypropylene vial and insert with 450 μL loading capacity. • Fit most standard 12x32 mm autosamplers, including UHPLC instruments

298.00 €

Thomson SINGLE StEP Nano-Filterfläschchen

Restek / Filter Probenvorbereitung

Thomson SINGLE StEP Nano Filter Vials •Ultra-low dead volume allows you to filter as little as 10 μL of sample and still obtain enough filtrate to make a 2 μL injection. •Easy-to-use vials offer fast sample filtration and require only a squeeze of your fingers. •Color-coded caps allow easy identification of 0.2 μm or 0.45 μm membranes in PVDF, PTFE, PES, or nylon. •Available with either standard or preslit PTFE/silicone caps. Standard caps minimize evaporation and preslit caps help eliminate broken autosampler needles and cored septa. •Rugged polypropylene vial houses insert with 250 μL loading capacity and extremely low dead volume (8 μL). •Fit most standard 12 x 32 mm autosamplers, including UHPLC instruments.

439.00 €

Thomson SINGLE StEP Filterfläschchen mit geringer Verdunstung

Restek / Filter Probenvorbereitung

Thomson SINGLE StEP Low Evaporation Filter Vials •Enhanced evaporation prevention technology, and no preslit in the cap membrane ensures less than 0.4% evaporation over 24 hours. •Easy-to-use vials offer fast sample filtration and require only a squeeze of your fingers. •Color-coded caps allow easy identification of 0.2 μm or 0.45 μm membranes in PVDF, PTFE, or nylon. •Rugged polypropylene vial houses insert with 450 μL loading capacity and low dead volume (120 μL). •Fit most standard 12 x 32 mm autosamplers, including UHPLC instruments

Price on request

Thomson SINGLE StEP eXtreme Filterfläschchen

Restek / Filter Probenvorbereitung

Thomson SINGLE StEP eXtreme Filter Vials •Provide multilayer filtration for viscous samples and samples containing up to 30% solid particulates. •Allow compounds to be separated from matrix, resulting in both higher signal-to-noise ratios and more differentiated peaks. •Easy-to-use vials offer fast sample filtration and require only a squeeze of your fingers. •Color-coded caps allow easy identification of 0.2 μm or 0.45 μm membranes in PVDF, PTFE, PES, or nylon. •Preslit PTFE/silicone caps help eliminate broken autosampler needles and cored septa. •Rugged polypropylene vial houses insert with 450 μL loading capacity and low dead volume (120 μL). •Fit most standard 12 x 32 mm autosamplers, including UHPLC instruments.

360.00 €

KT953826-0000 - Frittenglashalter, 47 mm, 40/35 Fuge für Microfiltration Apparatus

Restek / Filter Probenvorbereitung

Membrane Microfiltration Glassware 47 mm filtration apparatus with fritted glass support is recommended for routine filtration of corrosive liquids and removal of particles from LC solvents. The ground joint connection eliminates phthalate contamination that can occur when using silicone or neoprene stoppers. The support base has a coarse-porosity glass frit and an integral vacuum connection, located above the drip tip to prevent contamination of the vacuum line with filtrate droplets. Each apparatus includes a funnel, an anodized aluminum clamp, a 47 mm fritted glass support base, and a filtration flask.

304.00 €

KT953753-0000 - Aluminiumklemme, 47 mm für Microfiltration Apparatus

Restek / Filter Probenvorbereitung

Membrane Microfiltration Glassware 47 mm filtration apparatus with fritted glass support is recommended for routine filtration of corrosive liquids and removal of particles from LC solvents. The ground joint connection eliminates phthalate contamination that can occur when using silicone or neoprene stoppers. The support base has a coarse-porosity glass frit and an integral vacuum connection, located above the drip tip to prevent contamination of the vacuum line with filtrate droplets. Each apparatus includes a funnel, an anodized aluminum clamp, a 47 mm fritted glass support base, and a filtration flask.

119.00 €

KT953827-0000 - Kolben, 1000 ml, 40/35 Verbindung für Microfiltration Apparatus

Restek / Filter Probenvorbereitung

Membrane Microfiltration Glassware 47 mm filtration apparatus with fritted glass support is recommended for routine filtration of corrosive liquids and removal of particles from LC solvents. The ground joint connection eliminates phthalate contamination that can occur when using silicone or neoprene stoppers. The support base has a coarse-porosity glass frit and an integral vacuum connection, located above the drip tip to prevent contamination of the vacuum line with filtrate droplets. Each apparatus includes a funnel, an anodized aluminum clamp, a 47 mm fritted glass support base, and a filtration flask.

197.00 €

KT953828-0000 - Kolben, 2000 ml, 40/35 Verbindung für Microfiltration Apparatus

Restek / Filter Probenvorbereitung

Membrane Microfiltration Glassware 47 mm filtration apparatus with fritted glass support is recommended for routine filtration of corrosive liquids and removal of particles from LC solvents. The ground joint connection eliminates phthalate contamination that can occur when using silicone or neoprene stoppers. The support base has a coarse-porosity glass frit and an integral vacuum connection, located above the drip tip to prevent contamination of the vacuum line with filtrate droplets. Each apparatus includes a funnel, an anodized aluminum clamp, a 47 mm fritted glass support base, and a filtration flask.

323.00 €

KT953829-0000 - Kolben, 4000 ml, 40/35 Verbindung für Microfiltration Apparatus

Restek / Filter Probenvorbereitung

Membrane Microfiltration Glassware 47 mm filtration apparatus with fritted glass support is recommended for routine filtration of corrosive liquids and removal of particles from LC solvents. The ground joint connection eliminates phthalate contamination that can occur when using silicone or neoprene stoppers. The support base has a coarse-porosity glass frit and an integral vacuum connection, located above the drip tip to prevent contamination of the vacuum line with filtrate droplets. Each apparatus includes a funnel, an anodized aluminum clamp, a 47 mm fritted glass support base, and a filtration flask.

409.00 €

25861 - Filterfläschchenpresse für Filterfläschchen

Restek / Filter Probenvorbereitung

Filter Vial Press Multi-Use: 8 Positions for 30mL Filter Vials & 48 Position for Autosampler Ready Filter Vials

1,823.00 €

25860 - Umschaltpresse für eXtreme Filterfläschchen

Restek / Filter Probenvorbereitung

Toggle Press for eXtreme Filter Vials

531.00 €

KT953751-0000 - Glastrichter, 47 mm, 300 ml für Microfiltration Apparatus

Restek / Filter Probenvorbereitung

Membrane Microfiltration Glassware 47 mm filtration apparatus with fritted glass support is recommended for routine filtration of corrosive liquids and removal of particles from LC solvents. The ground joint connection eliminates phthalate contamination that can occur when using silicone or neoprene stoppers. The support base has a coarse-porosity glass frit and an integral vacuum connection, located above the drip tip to prevent contamination of the vacuum line with filtrate droplets. Each apparatus includes a funnel, an anodized aluminum clamp, a 47 mm fritted glass support base, and a filtration flask.

93.00 €

KT953761-0000 - Glastrichter, 47 mm, 100 ml für Microfiltration Apparatus

Restek / Filter Probenvorbereitung

Membrane Microfiltration Glassware 47 mm filtration apparatus with fritted glass support is recommended for routine filtration of corrosive liquids and removal of particles from LC solvents. The ground joint connection eliminates phthalate contamination that can occur when using silicone or neoprene stoppers. The support base has a coarse-porosity glass frit and an integral vacuum connection, located above the drip tip to prevent contamination of the vacuum line with filtrate droplets. Each apparatus includes a funnel, an anodized aluminum clamp, a 47 mm fritted glass support base, and a filtration flask.

89.00 €

KT953771-0000 - Glastrichter, 47 mm, 500 ml für Microfiltration Apparatus

Restek / Filter Probenvorbereitung

Membrane Microfiltration Glassware 47 mm filtration apparatus with fritted glass support is recommended for routine filtration of corrosive liquids and removal of particles from LC solvents. The ground joint connection eliminates phthalate contamination that can occur when using silicone or neoprene stoppers. The support base has a coarse-porosity glass frit and an integral vacuum connection, located above the drip tip to prevent contamination of the vacuum line with filtrate droplets. Each apparatus includes a funnel, an anodized aluminum clamp, a 47 mm fritted glass support base, and a filtration flask.

173.00 €

KT953781-0000 - Glastrichter, 47 mm, 1000 ml für Microfiltration Apparatus

Restek / Filter Probenvorbereitung

Membrane Microfiltration Glassware 47 mm filtration apparatus with fritted glass support is recommended for routine filtration of corrosive liquids and removal of particles from LC solvents. The ground joint connection eliminates phthalate contamination that can occur when using silicone or neoprene stoppers. The support base has a coarse-porosity glass frit and an integral vacuum connection, located above the drip tip to prevent contamination of the vacuum line with filtrate droplets. Each apparatus includes a funnel, an anodized aluminum clamp, a 47 mm fritted glass support base, and a filtration flask.

234.00 €

KT953825-0000 - 300 ml Trichter, 1000 ml Kolben

Restek / Filter Probenvorbereitung

Membrane Microfiltration Glassware 47 mm filtration apparatus with fritted glass support is recommended for routine filtration of corrosive liquids and removal of particles from LC solvents. The ground joint connection eliminates phthalate contamination that can occur when using silicone or neoprene stoppers. The support base has a coarse-porosity glass frit and an integral vacuum connection, located above the drip tip to prevent contamination of the vacuum line with filtrate droplets. Each apparatus includes a funnel, an anodized aluminum clamp, a 47 mm fritted glass support base, and a filtration flask.

558.00 €

KT953835-0000 - 500 ml Trichter, 2000 ml Kolben

Restek / Filter Probenvorbereitung

Membrane Microfiltration Glassware 47 mm filtration apparatus with fritted glass support is recommended for routine filtration of corrosive liquids and removal of particles from LC solvents. The ground joint connection eliminates phthalate contamination that can occur when using silicone or neoprene stoppers. The support base has a coarse-porosity glass frit and an integral vacuum connection, located above the drip tip to prevent contamination of the vacuum line with filtrate droplets. Each apparatus includes a funnel, an anodized aluminum clamp, a 47 mm fritted glass support base, and a filtration flask.

721.00 €

KT953845-0000 - 1000 ml Trichter, 4000 ml Kolben

Restek / Filter Probenvorbereitung

Membrane Microfiltration Glassware 47 mm filtration apparatus with fritted glass support is recommended for routine filtration of corrosive liquids and removal of particles from LC solvents. The ground joint connection eliminates phthalate contamination that can occur when using silicone or neoprene stoppers. The support base has a coarse-porosity glass frit and an integral vacuum connection, located above the drip tip to prevent contamination of the vacuum line with filtrate droplets. Each apparatus includes a funnel, an anodized aluminum clamp, a 47 mm fritted glass support base, and a filtration flask.

753.00 €

KT676001-4035 - 40/35 PTFE-Gelenkhülse für Microfiltration Apparatus

Restek / Filter Probenvorbereitung

Membrane Microfiltration Glassware 47 mm filtration apparatus with fritted glass support is recommended for routine filtration of corrosive liquids and removal of particles from LC solvents. The ground joint connection eliminates phthalate contamination that can occur when using silicone or neoprene stoppers. The support base has a coarse-porosity glass frit and an integral vacuum connection, located above the drip tip to prevent contamination of the vacuum line with filtrate droplets. Each apparatus includes a funnel, an anodized aluminum clamp, a 47 mm fritted glass support base, and a filtration flask.

222.00 €

KT953830-0000 - Kolbenkappe, 40/35 äußere Verbindung für Microfiltration Apparatus

Restek / Filter Probenvorbereitung

Membrane Microfiltration Glassware 47 mm filtration apparatus with fritted glass support is recommended for routine filtration of corrosive liquids and removal of particles from LC solvents. The ground joint connection eliminates phthalate contamination that can occur when using silicone or neoprene stoppers. The support base has a coarse-porosity glass frit and an integral vacuum connection, located above the drip tip to prevent contamination of the vacuum line with filtrate droplets. Each apparatus includes a funnel, an anodized aluminum clamp, a 47 mm fritted glass support base, and a filtration flask.

81.00 €

WAT023343 - AP-5 Filter

Waters / Filter Probenvorbereitung

Advanced Purification AP-5 Filter, 50 mm

198.00 €

Acrodisc, Spritzenfilter, Nylon

Waters / Filter Probenvorbereitung

This nylon membrane works well with both aqueous and organic solvents.

395.00 €

Acrodisc, Minispike Spritzenfilter, Nylon

Waters / Filter Probenvorbereitung

This nylon membrane works well with both aqueous and organic solvents.

395.00 €

Acrodisc, Spritzenfilter, PTFE

Waters / Filter Probenvorbereitung

This PTFE membrane is a good choice for use with aggresive organic solvents

395.00 €

Acrodisc, Spritzenfilter, Glasfilter

Waters / Filter Probenvorbereitung

Syringe Filter for viscous or particle-laden samples

2,560.00 €

Acrodisc, Spritzenfilter, IC

Waters / Filter Probenvorbereitung

Syringe Filter for ion chromatography applications

395.00 €

Acrodisc, Minispike Spritzenfilter, PVDF

Waters / Filter Probenvorbereitung

Acrodisc, Minispike Syringe Filter, PVDF, 13 mm, 0.45 µm, Protein, 100/pkg, Polypropylene, < 10 mL Sample Volume, < 14 µl Hold up Volume

395.00 €

Acrodisc, Lösungsfilter

Waters / Filter Probenvorbereitung

Solvent filtration Membranen.

146.00 €

Acrodisc, Minispike Spritzenfilter, PTFE

Waters / Filter Probenvorbereitung

This PTFE membrane is a good choice for use with aggresive organic solvents

395.00 €

Acrodisc, Spritzenfilter, PES

Waters / Filter Probenvorbereitung

Syringe Filter for ion chromatography applications

1,870.00 €

WAT200545 - Trichter 300 ml

Waters / Filter Probenvorbereitung

Trichter 300 mL

230.00 €

Acrodisc, Spritzenfilter mit Glas Vorfilter, Nylon

Waters / Filter Probenvorbereitung

This nylon membrane works well with both aqueous and organic solvents.

2,560.00 €

Acrodisc, Spritzenfilter, PVDF

Waters / Filter Probenvorbereitung

Hydrophilic polyvinylidene fluoride (PVDF) membranes good for aqueous and organic solvents.

280.00 €

700003784 - In-Line Filter, Titanium

Waters / Filter Probenvorbereitung

Spare parts

595.00 €

700002383 - Filter, Odour Element

Waters / Filter Probenvorbereitung

Spare parts

360.00 €

600000370 - Filter, 0,5 µl

Waters / Filter Probenvorbereitung

Filter, 0,5 µl

905.00 €

700001541 - 20 µl Solvent Filter Assembly

Waters / Filter Probenvorbereitung

The 20µm Solvent Filter enables customers to replace the filter assembly on the slvent inlet tubes of the 2545 Binary Solvent Manager, 2545 Quaternary Solvent Manager and 2555 Quaternary Solvent Manager.

440.00 €

Filterscheibe, Disc, wwPTFE

Waters / Filter Probenvorbereitung

Water wettable, hydrophillic, polytetrafluoroethene) membranes are a "next generation", all-purpose, hydrophilic membrane for aqueous, acidic, basic, non-aggressive organic, and aggressive organic solutions. It offers low protein binding and low levels of UV-absorbing extractables.

215.00 €

700004487 - Filter Media

Waters / Filter Probenvorbereitung

Spare parts for Mass Spectrometry

9.36 €

700004488 - Side Panel Filter Media

Waters / Filter Probenvorbereitung

Spare parts for Mass Spectrometry

9.36 €

700005316 - Filter Media, Right Panel

Waters / Filter Probenvorbereitung

Filter Media, Right Panel

64.48 €

700005315 - Filter Media, Left Panel

Waters / Filter Probenvorbereitung

Filter Media, Left Panel

80.08 €

WAT033350 - T Filter Insert, 5 µm, BGM

Waters / Filter Probenvorbereitung

T Filter Insert, 5 µm, BGM

55.12 €

WAT025495 - Cup Filter

Waters / Filter Probenvorbereitung

Cup Filter, SS, 10 Micron

20.00 €

415000506 - 2 µm Ersatz-Filter, PEEK, 2796

Waters / Filter Probenvorbereitung

The inline filter insert should be replaced when there is an increase in system pressure due to a build-up of buffers or salts.

35.97 €

MONTHLY TOP PRODUCTS

Contact form

You have any questions on our shop or to one of our products?

Please fill out your contact data and your information request, we will contact you as soon as possible with all requested information.

Catalog request

You have any questions on our shop or to one of our products?

Please fill out your contact data and your information request, we will contact you as soon as possible with all requested information.

Are you a company or a private?