OMNIJET dispenser, 10-100mL bottle top dispenser
Eco straight-through stopcock plug, undrilled, finest surface, with handle and nut made of PP as well as washer.
Eco straight-through stopcock plug, with bore, finest surface, with handle and nut made of PP as well as washer.
Eco three-way (T) stopcock plug with bore, finest surface, with handle and nut made of PP as well as washer.
Eco two-way (patent) stopcock plug with bore, finest surface, with handle and nut made of PP as well as washer.
Eco stopcock on the side with bore, finest surface, with handle and nut made of PP as well as washer and an outlet tip with an inner Ø of 1 mm.
Measuring cylinder, PTFE / TFM. Translucent and pore-free, design based on ISO 4788. With scaling (not calibrated), spout and reinforcement ring on top. Universally chemically resistant, the medium only comes into contact with PTFE. Applications: Volume measurement of aggressive or ultra-pure liquids
Pipette rinsing device for problem-free, gentle cleaning and safe storage of pipettes. A complete system suitable for any laboratory.
Pipette cleaning container. For problem-free and gentle cleaning of pipettes according to the suction lifter principle. A complete rinsing system consists of a pipette washer, cleaning container and pipette basket, please order each separately. Heat resistant up to 105 ° C, good chemical resistance. Pipette basket: For holding pipettes up to 600 mm or Mohr burettes. The basket is provided with a handle and a height-adjustable ring. The bottom made of elastic PE reduces the risk of damaging the pipettes. Cleaning container: For pre-cleaning the pipettes Pipette washer: For rinsing the pre-cleaned pipettes. The emptying siphon allows a constant exchange of water. The water supply should be approx. 2 l / min. "
DURAN® Measuring cylinders, hexagonal base, without graduation, without stamping in foot.
Claw for Pumpenkopf SP quick
Tygon® for Hydrocarbons For Single- and Multi-Channel use (not suitable with cassette small) • Application: Especially for hydrocarbons, mineral oil products and distillates • Features: · Ideal for petrol, kerosene, heating oil, cutting solutions and coolants on a glycol base · Resistant to ozone and UV • Material: Thermoplastic soft PVC, translucent yellow • Complies with the standards: GLP conform • Temperature range: -40 to +75 °C • Sterilization: Sterilization is not recommended • Restriction: Not suitable for concentrated acids, lyes, food and pharmaceutics Used with: Acids: good Lyes: good Solvents: conditional Pressure: good Vacuum: good Viscous media: excellent Sterile media: conditional
Mounting flange (Pump head SP standard/vario)
Deep groove ball bearing 6001 VA DIN625 (Pump head SP quick)
Pump head peristaltic SP vario •Suitable for most Heidolph Tubing due to adjustable roller spacing •Convex rollers do not squeeze or crush organic cell cultures •Pump head features ball bearings •Rollers made of stainless steel and aluminum •Depending on drive and Tubing, the flow rate ranges from 2.0 to 4,151 ml per minute
Hei-FLOW Silver 1 Package This package includes: • Hei-FLOW Core 120 • Pump head SP quick 1.6 • 1-m each Tygon® (standard) and Silicone tubing (inner Ø 3.1 mm)
Hei-FLOW Value 06 Peristaltic Pumps For standard applications and liquid transfer •Flow rates of 4.0 - 4,151 ml/min with single-channel pump heads •This pump drive is not suitable for multi-channel operation •Adjust the variable speed from 50 - 600 rpm on the analog control knob. Your speed is held constant even under changing loads •These models feature electronic speed control at an accuracy rate of ±2 % •At the press of a button the pump operates clockwise or counter-clockwise
Please fill out your contact data and your information request, we will contact you as soon as possible with all requested information.
Please fill out your contact data and your information request, we will contact you as soon as possible with all requested information.
