Anti-static Solution. Large U-Electrode for discharging all kinds of samples and tare containers with dimensions of 15x25 cm Reliable Weighing Results: Use the U-Electrode to completely remove electrostatic charge from your samples and tare containers and avoid distortion of your weighing results. Fast and Safe Sample Handling: This anti-static solution enables fast dosing processes and substantially reduces the risk of contamination. Flexible positioning: The U-Electrode can be freely placed next to your balance. It can generally be used with every kind of balance.
Connection cable AS9/10m-ST-Triax7 for electrodes with S7 or S8 plug head
Connecting cable AK9/3m/-15.50D
Calibration Substance MP VPac. Pre-filled capillaries of three different reference substances can be used for the verification of your instrument immediately after unpacking The respective calibration method can be started with One ClickTM without any modification. All MP VPacs are delivered with a certificate for each reference substance. • Reference substance: Benzoic acid, Saccharin, Phenyl salicylate
The InPro 3250SG 120/PT1000 is a pre-pressurized, liquid filled, low maintenance pH/ORP probe combined with a PT1000 temperature sensor for in-line measurement in demanding applications. The 120 mm version is optimal for short installation lengths. • is designed to withstand the rigors of your production. Its pre-pressurized, maintenance-free reference system ensures high reproducibility and reliable measurement performance under diverse operating conditions. • suited for chemical and biopharmaceutical production. Its certification covers hazardous zone use, biocompatibility of the electrolyte, and all relevant hygiene and safety regulations. • can measure pH and ORP in industrial processes and has a built-in PT1000 temperature sensor. It is pressure resistant up to 4 barg (58 psig), has a watertight connector, and can withstand repeated sterilization and autoclave cycles.
Drip tray in grey for better visibility of light colored powders and stains for XPE/XS analytical balances: •Prevent contamination •Increased visibility of light colored powders and stains. •The drip tray slides out easy and can be cleaned in the dishwasher. •Contamination is easy to see, to remove and to clean.
Electrolyte and cleaning solutions for electrodes. Supplied in packs of 250ml.
For use with InLab OptiOx Dissolved Oxygen Sensors
Built-in compact antistatic kit for XPE analytical balances The compact antistatic kit eliminates positive and negative charges from the container and sample. The ionizer fixes onto the balance and does not need an external transformer.
Puncture Knife for electrode
pH-Elektrode pH 31 EasySense
Granite weighing table for laboratory balances to reduce measurement inaccuracies due to external influences. Stone tables are the classic instrument for vibration damping. With a very massive weight, depending on the size of 330-550 kg, the stone tables are ideal for rooms and laboratories to obtain precise weighing results The material, the Bianco sardo stone, is very robust against liquids and other external influences. The feet of the stone tables are connected to a solid stainless steel strut. The stone slab is also fixed with high-quality vibration dampers.
For an easy start, choose one of our ready-to-use kits which includes the pH meter, an application-specific sensor and calibration standards. • pH electrode InLab® Expert Pro-ISM with robust PEEK shaft, integrated NTC 30 kΩ temperature sensor and ARGENTAL™ reference system. The electrode is always ready for use as the solid XEROLYT® reference electrolyte does not need to be refilled • Magnetic stirrer EasyMix™ homogenizes the sample and thus ensures accurate measurement results Scope of supply: pH meter SevenDirect™ SD20, electrode arm EasyPlace™, magnetic stirrer EasyMix™, pH electrode InLab® Expert Pro-ISM, 3 x 2 calibration buffer sachets pH 4.01, 7.00 and 9.21 or 10.01, protective cover, power supply, get-started-guide
Al piercing lid. Lids specially made to be automatically pierced before the transfer into the measuring cell. • The piercing lids can be combined with the aluminum pans (25, 40, 100, 160 uL pans). By using the sealing press, pan and lid are cold welded. • The unique lid piercing device ("wasp") allows you to open hermetically sealed crucibles just before the measurement start. • Piercing immediately before the measurement start ensures that drying or water uptake of the sample during the waiting period does not occur.
Analytical Balance. All the basic functionality you need. Thanks to METTLER TOLEDO's proven weighing technologies and quality manufacturing, you can trust your weighing results to be consistent and precise. The bright display provides easy access to settings, features, and applications, providing everything you need for fast and efficient weighing. The metal base, stainless steel weighing pan and overload protection ensure reliable performance, even under intense daily use. • brilliant display • convenient device connection via RS232 • external adjustment • robust construction • easy leveling • 10 applications Weighing Pan Diameter: 90 mm Dimensions (WxDxH): 210 x 344 x 344 mm
USB extension cable, 1.8 m. for PC or printer
SevenExcellence cover semi-transparent
Base plate for the EasyPlace electrode arm.
Draft shield with sliding doors, height 236 mm. The draft shield minimizes air turbulence around your balance, enabling results to be delivered faster.
Flexible Connection. RS9-RS25: m/f, length 2 m Connection RS9 (m) – RS9 (f) Cable for connecting a balance (RS232C, 9-pin, m) to a printer, PC or titrator (RS232C, 9-pin, f).
Meter kits are suitable for measuring the pH value and ion concentration of samples and can be used in a wide range of laboratory areas. • pH / ion meter SD50 with large 7" touch screen and 5 point calibration • pH electrode InLab® Micro Pro-ISM with ARGENTHAL™ reference system and NTC 30 kΩ temperature sensor. The small shaft diameter (5 mm) enables measurements in small vessels such as vials or cuvettes Scope of supply: pH / ion meter SevenDirect™ SD50, electrode arm EasyPlace™, pH electrode InLab® Micro Pro-ISM, 3 x 2 calibration buffer sachets pH 4.01, 7.00 and 9.21 or 10.01, protective cover, power supply, get-started-guide
Pan Protection MS 166x196mm. The self-adhesive sheet protects your precision balance from stains and scratches, and absorbs minor spills.
pH/conductivity meter SevenGo Duo SG23-B two-channel, with BNC and LTW connections, including batteries, hand strap, operating instructions. Specifications: Parameters: Conductivity / pH Channel: dual channel Temperature accuracy (±): 0.5°C, 0.2°C- Protection class: Water and dustproof (IP67) Ease of use: calibration support Dimensions: 220 x 90 x 45mm Display Type: LCD Sensor included: None Connections; BNC / RCA/Cinch (both IP67) Compatible with Intelligent Sensor Management (ISM): Yes Temperature measurement resolution: 0.1°C Temperature range: -5°C - 105°C Weight: 368g Languages: English pH measuring range: 0 – 14 Resolution pH measurement value: 0.01 pH measurement accuracy (±): 0.01 Conductivity measuring range: 0.1 µS/cm to 500 mS/cm Conductivity: Accuracy (±): 0.5% mV measurement range: -1999 to 1999 mV
Melting point determination device • Temperature range +50°C to +260°C • easy to use • Different characteristics can be observed at the same time • linear temperature increase • High precision • rapid identification of organic substances • Ready-to-use compilation with test and calibration substances • available as a 230 V or 115 V version • Dimensions (W x H x D): 430 x 100 x 140 mm
Test and calibration substance set (8 pieces) for the Kofler heating bench.
Weighing jars, PP. Transparent. With knobbed lid. Autoclavable. Remove the lid before autoclaving.
Viscometer holder WVB02010 for Ubbelohde, Ostwald, etc.
Multi-function-quartz-stopwatch, recording period 50 minutes, 59 seconds and 99/100 seconds, 6 digit LCD-display. Functions: start/stop, addition, split, reset, battery operated (1.5 V - life time about 2 years), ABS-housing.
Balance WBA-220 analytical 0,1 mg - 220 g Ideal for: • analytical balancing Features: • external calibration • weight mode g / ct • counting and weighing mode available • with Ø 80 mm weighing plate and glass draft shield • weighing response time adjustable • electromagnetic base • numeric linearity calibration • built-in RS232C port for printer • blue digital LCD display with backlight function • 200 g calibration weight included • stabilization time (typical at fast) ≤ 8 seconds • appearance parameters • CE certified and unique serial number for tracing Analytical balance WBA-220, 200 g calibration weight, power cable, instruction manual Standard Analytical balance, type WBA-220, weighing range: 0,1 mg - 220 g, weighing plate: Ø 80 mm, with counting and weighing mode, weight mode: g/ct, digital LCD with blue back-light function, dimension: 190 x 240 x 265 mm, weight: 6,3 kg, incl. glass draft shield and calibration weight (200 g), with adapter (220 V AC) for DC power 9 V, 2A , serial-no.
Weighing funnel, glass pointed, for weighing of chemicals.
Ball set (ball 1 to 6) in wooden case. Balls for falling ball viscometer HAAKE™ Type C
Weighing brush made from extremely soft, antistatic, natural hair. An ideal tool for cleaning weighing boats, weighing pans and any comparable objects.
Pycnometer - not calibrated / calibrated. Manufactured according to ISO standard 3507. For easy differentiation, both the body and the stopper have the same identification code number. Equipped with a stopper with precisely ground upper and lower ends. The nominal value and the inscriptions are in blue enamel applied. • Non-calibrated pycnometers are adjusted for inlet to 0.001 ml without calibration. • Calibrated pycnometers are adjusted to the inlet to 0.001 ml. The net volume is engraved on the pycnometer. • Calibrated pycnometers with thermometers are adjusted to the inlet to 0.001 ml. The net volume is engraved on the pycnometer. Supplied with a thermometer for the scale range from + 10 ° C to + 40 ° C in a graduation of 0.5 ° C. "
Weighing paper, made from opaque and transparent paper that is particularly suitable for weighing. It leaves no residue or contamination after weighing use. Cut to the dimensions 100 x 100 mm and packed in booklets of 250 papers.
Weighing dishes (boats) made of polystyrene. For many applications such as weighing, dispensing and storage. Features: • Since the antistatic property of the raw material prevents static build-up, they are particularly recommended for weighing fine powders. • They can be used as freezer and mixing trays for small, divided quantities and also for moisture testing with the microwave method. • Guarantees very good chemical and temperature resistance from -10 ° C to + 70 ° C. • The flat bottom ensures perfect stability on work surfaces, while the smooth and non-porous inner surface ensures accurate pouring with minimal loss of samples. • Non-sterilized trays of 100 pieces, Gamma sterilized of 10 pieces.
Weighing dish made from high quality, oil-free, durable and lightweight aluminum. Features: • The special design guarantees a very good use together with scales for moisture determination. • Can also be used as a mixing or weighing pan. • Wall with a height of 8 mm guarantees use without spillage. • Can be easily stacked due to the conical shape of the body and therefore save space.
Weighing scoops made of stainless steel. The high-gloss, smooth inner surface enables precise pouring without losing samples.
DURAN® Weighing bottle. With grip stopper, tall shape.
DURAN® Weighing bottle, with grip stopper, flat shape.
DURAN® Weighing bottles top. Unground.
The immersion / penetration thermometer is suitable for recording the temperature in gases, in soft or powdery substances and liquids. New: The waterproof mini thermometer can be easily cleaned under running water or even in the dishwasher.
Grade 609 Kjeldahl Weighing Boat Excellent for weighing and transferring Kjeldahl samples securely and reliably. Dissolves residue-free in the digestion solution without influencing the analytical results in any way. Made from very low nitrogen parchment paper without any glue or additives. Transfer samples without loss by simply dropping the entire weighing boat containing the sample into the acid solution in the Kjeldahl flask/digestion tube. The fastest and most reliable way to transfer Kjeldahl samples.
Grade B-2 Kjeldahl Weighing Boat Sheets Transfer your samples completely loss-free by simply dropping the entire weighing boat containing the sample into the acid solution in the Kjeldahl flask/digestion tube. Features: • Excellent for weighing and transferring Kjeldahl samples safely and reliably • Dissolves residue-free in the digestion solution without influencing the analytical results in any way • Made from very low nitrogen parchment paper without any glue or additives
Grade 2122 Kjeldahl Weighing Boat Sheet The Grade 2122 paper sheets allow samples to be reliably transferred to scales without unwanted substances must be added that could affect the analysis results.
Pycnometers, Borosilicate glass 3.3., incl. DAkkS calibration certificate Blaubrand®. Every pycnometer is calibrated with its own stopper, hence, stoppers are not interchangeable. Each bottle and its stopper is marked with an unique matching identification number. All BLAUBRAND® density bottles are supplied with one accompanying individual certificate in the original packaging. • DIN ISO 3507 • Gay-lussac pattern calibrated • Calibrated to contain (TC, In) • Reference temperature 20°C • With NS10/19 capillary stopper • Top of stopper ground and polished • Inscriptions in high contrast blue enamel
Density bottle Gay-Lussac pattern calibrated, Borosilicate glass 3.3., DIN ISO 3507. Calibrated to contain (TC, In). Incl. individual certificate. Stopper NS 10/19 with capillary. Top of stopper ground and polished.
Density bottle Gay-Lussac pattern uncalibrated, Borosilicate glass 3.3., DIN ISO 3507. Stopper NS 10/19 with capillary. Top of stopper ground and polished. Nominal capacity printed on the bottom.
Please fill out your contact data and your information request, we will contact you as soon as possible with all requested information.
Please fill out your contact data and your information request, we will contact you as soon as possible with all requested information.