23 mm Septa, EPA lowbleed, for Archon purge and trap
22 mm septa, PTFE/silicone, for Archon purge and trap
20 mm Pharma-Fix-Septum, Butyl/PTFE, 50° shore A, 3,0mm
Universal, long-life GC-Septa • Suitable for inlet temperatures of up to 340°C. • Low bleeding
GC injection port septa for standard applications - sealing the injection port and improving the injecting of the sample.
GC injection port septa for standard applications - sealing the injection port and improving the injecting of the sample.
GC injection port septa for standard applications - sealing the injection port and improving the injecting of the sample.
GC injection port septa for standard applications - sealing the injection port and improving the injecting of the sample.
CenterGuide AG3 Septa with higher durability than BTO
CenterGuide BTO Septa for highest demands in GC and GC-MS
CenterGuide Marathon Septa with extreme durability for > 400 injections
Premium Non-Stick BTO Septa • Usable to 400 °C inlet temperature.* • New plasma coating eliminates sticking in the injection port. • Precision molding ensures consistent, accurate fit. • Septa have a CenterGuide design to minimize coring. (Not available on 9.5 mm, 10 mm, and Shimadzu Plug.) • 5 mm and 11 mm septa are partially predrilled. • Preconditioned and ready to use. • Packaged in ultra-clean blister packs. • Each batch GC-FID tested. • Bleed and temperature optimized; ideal for demanding GC and GC-MS applications.
Merlin Microseal Replacement Septa •Withstands thousands of injections. •Eliminates septum coring and crumbling. •Reliable performance during extended runs. •O-ring detail seals needle during injection. •Duckbill seals more tightly at higher pressures. •Low insertion force for easy manual injections. •Reduced septum bleed and ghost peaks. Note: Merlin Microseal septa require the appropriate adaptor kit or nut for your GC.
Mininert Septa Replacement Septa Pack of 50
•Allow operation from 3 to 100 psi (general-purpose Microseal septa) or 1 to 45 psi (low-pressure Microseal septa). •400 °C max injection port temperature.
Septa (Plug) for SRI GCs Thermolite® Septa •Usable to 340 °C inlet temperature*. •Precision® molding assures consistent, accurate fit. •Excellent puncturability. •Preconditioned and ready to use. •Packaged in ultra-clean blister packs**. •A Restek® exclusive! Premium Non-stick BTO® Septa •Usable to 400 °C inlet temperature*. •New plasma coating eliminates sticking in the injection port. •Precision® molding ensures consistent, accurate fit. •Partial predrilled CenterGuide design. •Preconditioned and ready to use. •Packaged in ultra-clean blister packs**. •Each batch GC-FID tested. •Bleed and temperature optimized; ideal for demanding GC and GC-MS applications. Note: Due to differences in inlet design, the actual septum temperature for a given inlet setpoint can vary by manufacturer. Restek® recommends using only BTO® septa in Thermo TRACE and Focus GCs. *For 17 mm inlets, the maximum temperature is 330 °C. For all injectors, minimum recommended operating temperature for BTO® septa is 250 °C.
Merlin Microseal Septa for Shimadzu GCs •Compatible with Shimadzu models GC-2010 and GC-2025 only. •450 °C maximum injection port temperature. •For use with 23-gauge (0.63 mm, 0.025&Prime,) needle or probe with blunt, truncated conical tip.
Septa, Premium BTO, 17mm Premium Non-stick w/CenterGuide, 50-pk
Merlin Microseal Septa for Bruker/Varian GCs •400 °C max injection port temperature •Similar to Supelco 24817-U
Merlin Microseal Septa for PerkinElmer GCs •400 °C max injection port temperature •Similar to PerkinElmer N9303344
Merlin Microseal Septa for Thermo TRACE 1300 and 1310 GCs •Eliminates septum coring and prolongs septum life. •Consistently low needle-insertion force. •Simple installation with no injection port modification. •Smaller diameter to accept 23-gauge needles and SPME fibers. •400 °C max injection port temperature.
Replacement Septa for Gas Sampling Bags Note: Use only Point Style 5 or H syringe needles.
Thermolite Plus Septa •Can be used up to 350°C injector temperature (for 17mm diameter up to 300°C) •Ultra-low bleed minimizes background signal. •New plasma coating eliminates sticking in the injection port. •Precision molding ensures consistent, accurate fit. •Septa have a CenterGuide design to minimize coring. (Not available on 6 mm, 7 mm, 8 mm, 9.5 mm, 10 mm, and Shimadzu plug.) •5 mm septa are partially predrilled for improved puncturability. •Preconditioned and ready to use. •Packaged in ultra-clean blister packs. •Each batch GC-FID tested
Thermolite Plus Septa •Can be used up to 350°C injector temperature (for 17mm diameter up to 300°C) •Ultra-low bleed minimizes background signal. •New plasma coating eliminates sticking in the injection port. •Precision molding ensures consistent, accurate fit. •Septa have a CenterGuide design to minimize coring. (Not available on 6 mm, 7 mm, 8 mm, 9.5 mm, 10 mm, and Shimadzu plug.) •5 mm septa are partially predrilled for improved puncturability. •Preconditioned and ready to use. •Packaged in ultra-clean blister packs. •Each batch GC-FID tested
Replacement Septa for Gas Sampling Bags Note: Use only Point Style 5 or H syringe needles.
X25 GC injection septa, Chromse AL 9001 green, 11 mm diam.
High Temperature GC Septa for Shimadzu
Long Life GC Septa for Shimadzu
11-mm High Temperature GC Septa
9,5-mm High Temperature GC Septa
These septa, made from low-bleed silicone, have excellent mechanical properties, are ideal for demanding GC-MS applications and can be used reliably up to 400°C. Contamination-free in individual blister packs
Low coring. Maximum temperature 350 °C. For use in Thermo Scientific™ TRACE™ and FOCUS™ GCs and third-party instruments. Contamination-free in individual blister packs
General purpose. Maximum temperature 250 °C. For use in Thermo Scientific™ TRACE™ and FOCUS™ GCs and third-party instruments. Contamination-free in individual blister packs
Highly durable, ideal for SPME. Maximum temperature 350 °C. For use in Thermo Scientific™ TRACE™ and FOCUS™ GCs and third-party instruments. Contamination-free in individual blister packs
Please fill out your contact data and your information request, we will contact you as soon as possible with all requested information.
Please fill out your contact data and your information request, we will contact you as soon as possible with all requested information.