Tubing adapter, peristaltic pump, used to connect peristaltic pump tubing to sample tubing, Agilent ICP-MS ISIS-DS, 2/pk
Tray for 16 Spectrophotometer cells
Nebulizer cleaning wire, 3 x 0.9 m lengths
Burner cleaner strips, 100/pk
Mixing paddles, 5/pk, for Mark VI universal spray chamber
O-ring for Babington nebulizer, FPM, Agilent 7500 ICP-MS, to create seal between nebulizer and end cap
O-ring for concentric nebulizer when used with organic solvents, Agilent 7500/7700 and 8800 series ICP-MS.
O-Ring für Injektionseinheit,
O-rings for vent valve, Viton.
GazFit fittings for one piece and semi-demountable ICP-OES torches.
Odor Element for oil mist filter for E2M18, 5/pk
Filter, polyethylene, for 1/8 in dissolution probe, 45 µm pore size, Agilent 8453 UV dissolution multi-bath system (valve-based)
Holmium oxide/didymium glass gilter kit for optical filters
Drain fitting, right-angle, UniFit, for waste outlet from IsoMist spray chamber, 3/pk
Sample inlet (EzyFit) fitting for concentric glass nebulizer on radial ICP-OES, 0.75 mm ID x 1.6 mm OD capillary tubing
Cell fittings kit, black, connects tubing to flow cell, used with the sipper system for the Agilent 8453 UV
Ferrule, Tefzel and stainless steel lock rings, for 1/16 in od tubing, 10/pk
Sample inlet (EzyFit) fitting for concentric glass nebulizer on axial ICP-OES, 0.75 mm ID x 1.3 mm OD capillary tubing, 10/pk
Fittings and ferrule, 1/16 in, PEEK, for 8-port valve in Agilent 8453 UV dissolution system
Ferrule, for flow cell in Agilent 8453 UV sipper system
Gazfit fitting for ICP torch, 8mm.
Rinse bottle, external, 100 mL, with caps, for Agilent integrated autosampler (I-AS)
Vial for Agilent integrated autosampler (I-AS).
Sample vials, 1.1 mL, polyethylene, 2,000/pk. With skirted (free-standing) slightly rounded bottom and conical design which allows use of nearly the entire sample. These cups are translucent and recommended for use with most aqueous solutions. For use with the high capacity sample carousel (130 sample) for the PSD 120 for the Agilent GTA 120, and PerkinElmer AS-71/72/800 Graphite Furnace Autosamplers
Sample bottle, 250 mL, 60 mm od, narrow neck LDPE for 5 position standard rack used with SPS 4 autosampler
Inner sleeve for Carrier/Aux/Blend gas
Inner sleeve for Plasma gas line.
Electron multiplier, for Agilent 7500 ICP-MS without label HPK installed, S/N JP14100586 and earlier Converts incident ions into an amplified electric current to measure the ion signal. As voltage increases, amplification factor (gain) increases.
Tube anchor, for Agilent SPS 4 autosampler, secures transfer tubing from probe to instrument on arm of probe carriage to eliminate tangling, 2/pk
Cell holder, cylindrical, single, ambient, allows use of cylindrical cells up to 100 mm pathlength, for all Cary models
Variable pathlength cell holder For use with rectangular cells of 5, 10, 20, 30, 40 and 50 mm pathlength and a Solid Sample Holder. Must be fitted in slide-mount Solid Sample Holder kit in Cary 50/60 (P/N 10072300) or Cary 100/300 (P/N 10046500)
Probe holder. Rectangular end probes (4 ea) are supplied, suitable for use in standard 10 mm rectangular cuvettes
Temperature probe holder. Includes 4 tapered end temperature probes for use in rectangular micro-cells
Cell Holder, Multi Cell Transport
Cable ties, natural polypropylene, for use with Agilent SPS 4 autosampler, 10/pk
Tag for tubing identification, Agilent ICP-MS integrated sample introduction system with discrete sampling (ISIS-DS)
Adapter kit, conical, Agilent 8453 UV sipper, replacement fittings for flow cell-pump tubing used with the sipper system for the Agilent 8453 UV
Cap seal kit for SIPS 10/20, to seal 3-way SIPS tee piece when a reagent tube is not connected
Gas tubing kit for valve of Integrated Sample Introduction System (ISIS 3) used with Agilent 7900 Series ICP-MS. Includes PFA tube, 3.17 x 1.59 mm, 570 mm (5043-0020), PFA tube, 4 x 2 mm, 500 mm (5043-0019)
Comprehensive spares kit, for Agilent 7900 ICP-MS only, with x or s-lens, excludes interface cones so select required options to add these to the kit. Includes 2 peristaltic pump tubes for sample introduction, 12/pk (G1833-65569), drain, 12/pk (G1833-65570), 2 flared ends for internal standard, 12/pk (G3280-67047), PFA sample tubes, 0.5 mm id, 1.6 mm od, 5 m (G1820-65105), online internal standard addition kit (G3280-60590), drain tube assembly (G3280-60555), spray chamber for ultra high matrix introduction (UHMI) (G8400-67150), spray chamber drain tubing (G1820-65515), ball joint connector with dilution port (G3270-80024), dilution gas connector (0100-2703), dilution nozzle (G8400-20326), dilution gas port plug (G3280-20576), 2 clamps for torch ball joint connector (G8400-60327), carrier gas tubing (G3280-67022), torch with 2.5 mm id injector (G3280-80053), long-life shield plate (G1833-65419), bonnet for shield torch (G1833-65421), low impurity gas tubing kit (G3660-67040), gas line connector (G1820-65027), RF coil (G8400-60434), graphite gaskets for sampling cone, 3/pk (G3280-67009), screw/spacer O-ring for cell (G3280-67044), PTFE tubing for internal reaction gas line (G3280-20663), octopole assembly (G3280-67045), polishing paper for ion lens, 5/pk (G1833-65404), oil mist filter element (9499201), rotary pump oil, 2 x 1 L (6040-0834). Excludes nebulizer sample/gas connectors, screw and spacer kit for ion lens and interface cones, which can be added by selecting the required options for the type of ion lens fitted and the type of interface cone required (choice of standard Ni, Ni-plated or Pt interface cones).
Kit adaptor 1.1mL vial 130 Carousel
Polishing paper, 5 sheets each of waterproof polishing paper number 400 and 1200, Agilent 7500 ICP-MS
Sample/Rinse connection kit, for AVS switching valve, 2/pk. Includes super flangeless one-piece fitting, 1/4-28 flat bottom, for 1/16 inch od tubing fitted with 1/16 inch od PFA tubing and a conical adapter to join to the peristaltic pump tubing.
Please fill out your contact data and your information request, we will contact you as soon as possible with all requested information.
Please fill out your contact data and your information request, we will contact you as soon as possible with all requested information.
