PTFE hose. Translucent to milky white. Perfect as a line for aggressive and pure liquids or gases. Features: • almost universally chemically resistant • free of extractables • physiologically harmless • anti-adhesive surface • very good sliding properties • very good dielectric properties • flame retardant according to UL94V0 • Oxygen limit index over 95 • Resistant to radiation and weather • Can be sterilized in an autoclave ¹ Bending radius: minimum bending radius at room temperature 23 ° C in mm ² Burst pressure: arithmetical value in bar at room temperature 23 ° C. It is recommended to limit the maximum operating pressure to 25% of the burst pressure. At a higher temperature, this value has to be mulitplied by the reduction factor on page 296 (BOLA_Katalog.pdf). It is the responsibility of the user to check whether the hoses used meet the respective requirements.
Description: Transparent, gas-tight cables. Perfect as a line for aggressive and pure liquids or gases. Features: • non-porous • almost universally chemically resistant • free of extractables • physiologically harmless • anti-adhesive surface • very good sliding properties • very good dielectric properties • flame retardant according to UL94V0 • Oxygen limit index over 95 • Resistant to radiation and weather • Can be sterilized in an autoclave • mechanical strength even at high temperatures ¹ Bending radius: minimum bending radius at room temperature 23 ° C in mm ² Burst pressure: arithmetical value in bar at room temperature 23 ° C. It is recommended to limit the maximum operating pressure to 25% of the burst pressure. At a higher temperature, this value has to be multiplied with the reduction factor on page 296 (BOLA_Katalog.pdf). It is the responsibility of the user to check whether the hoses used meet the respective requirements.
Remaining stock range of hoses. No rejects, but about 10 unsorted hose reel remnants made of PTFE, FEP and PFA with different diameters. Length of the individual pieces up to a maximum of 2 meters. No desired combination possible.
Especially suitable for flanging with BOLA thermal flange devices. FEP: transparent hose, pore-free and gas-tight, for suitable for working temperatures from –200 ° C to +205 ° C, almost universal chemically resistant. Additional advantages: • free of extractables • physiologically harmless • anti-adhesive surface • very good sliding properties • very good dielectric properties • flame retardant according to UL94V0 • Oxygen limit index over 95 • Resistant to radiation and weather • Can be sterilized in an autoclave ¹ Bending radius: minimum bending radius at room temperature 23 ° C in mm ² Burst pressure: arithmetical value in bar at room temperature 23 ° C. It is recommended to limit the maximum operating pressure to 25% of the burst pressure. At a higher temperature, this value has to be multiplied with the reduction factor on page 296 (BOLA_Katalog.pdf). It is the responsibility of the user to check whether the hoses used meet the respective requirements.
Shrink tubing to protect thermal sensors, cables, electrical components, etc. against chemical damage. The shrinkage rate of 4:1 of the initial dimension means that the inner diameter of the hose shrinks to approx. 1/4, the length by a maximum of 15%. Good heat transfer due to the low wall thickness. Advantages: • transparent • non-flammable (ASTM D876) • Insulation resistance 1018 Ω / cm (ASTM D 876) • good dielectric strength • flame retardant
Please fill out your contact data and your information request, we will contact you as soon as possible with all requested information.
Please fill out your contact data and your information request, we will contact you as soon as possible with all requested information.