Screw cap for DV704 and Solvent Manager
Glass tube set (Stromboli V2.0)
This titration glass sensor for routine acid/base application in non-aqueous media is specially developed for use with EasyPlus™ Titrators.
O rings for screw cap DL, accessoires, KF set of 4 pcs.
Temperature probe made of Hastelloy C22 for temperature measurement in the range from 0 to 130 °C. • Break-proof, chemically resistant Hastelloy shaft • Integrated connection cable
Reservoir w/Lid 75 mL, RV-L25. This 25 pack reagent reservoir is intended for both multichannel and single channel pipettes. Holding 75 mL, this reservoir comes with a lid to limit debris from falling into it and is a great addition for repeat dispensing.
Robust Coulometric Karl Fischer Titrator. The C30SX delivers top flexibility in the Compact KF Coulometer line. Accurate results from 1 ppm to 5% water. Supports 150 methods, LabX Software for full data management and automated InMotion KF Ovens for high sample throughputs. Make leaps in productivity with the C30SX and automated InMotion Karl Fischer Oven to determine the water content of up to 26 samples. In regulated environments, LabX software provides full support for your compliance needs to 21 CFR Part 11 and EU Annex 11. With the intuitive One Click touchscreen interface, you may customize the home screen to run your workflows quickly and easily with a single tap on the screen. Specifications: • Max. number of methods: 150 • 120 shortcuts per user • Custom calculations • Preset roles for expert and routine mode • Solvent Managers • 120 samples per analysis (max.) • Generator Cell: without diaphragm • One Click® user interface • Flexibility and modularity: automation, plug & play accessories, weight transfer PC Software, One Click User Interface, Solvent Manager, Custom Calculations Pre-installed methods, user management • Drying oven (optional): DO308 (manual) • InMotion KF Oven • 5.7 (145mm) color VGA touchscreen • Languages: Chinese, English, French, German, Italian, Korean, Polish, Portuguese, Russian, Spanish
Plug & Play combined semi-micro silver ring electrode Combined semi-micro silver ring electrode for argentometric precipitation titrations. A robust minielectrode for small sample volumes. Especially for precipitation titrations in low sample volumes in the range from 10-20 mL and for automatic titrations on the Rondo 30 sample changer. Plug & Play sensor with integrated sensor chip for secure handling. Features and Benefits: • Sensor Chip • Ceramic frit diaphragm • Pure silver sensing element • ARGENTHAL™ reference system • Refillable reference electrolyte (1 mol/L KNO3)
Elektrolyt 0.5M DIPA-HCL-ISA. For use with Sodium analyzer. (no dan. goods)
Stromboli hose set for drying unit
The T7 expands modularity for Excellence line titrators, from 1 to 4 total burettes plus an extra sensor board to grow with advanced needs including KF. Supports InMotion automation + future upgradeability to full T9 functionality. The T7 widens options for additional burettes and sensor boards. When future needs are uncertain, the T7 allows full upgradeability to a T9 titrator. Compatible with powerful InMotion automation. Sample changing, complex titrations, cleaning steps and more run automatically, saving operator's time. In regulated environments, LabX software provides full support for your compliance needs to 21 CFR Part 11 and EU Annex 11. Specifications: • One click user interface • Additional burette drives (optional): 3 Max. • Method functions per method (2): 60 Max. • Software LabX: Express or Server - not included • Additional sensor cards (optional): 1 Max. • Automation option(s): InMotion, Rondolino, InMotion KF Oven • Application type: Potentiometric, Karl Fischer, coulometric, Karl Fischer (volumetric) • Measurement type: Chromatometric, Amperometric display, Diazotitration, Redox, Complexometry, Conductivity, Thermometric, Iodometric, Direct measurement (ion-selective), Addition of several standards, Potentiometric, Precipitation, Voltametric display, Single and two-phase (surfactants), Photometric, Cerimetric, Bromatometric, Acid/Base, Arsenometric • If...Then Conditions: No • Shortcuts per user: 24 • Karl Fischer titration: Yes • User rights management: Fully flexible role definitions • Solvent Manager (optional): Yes • Parallel titration: No • Max. number of methods: 150 • Samples per analysis (max): 303 • Barcode reader connection: Yes (USB) • Predefined methods: 70 • User-Defined Calculations: Yes • Tasks Running Simultaneously (Max.): 7 • EQP titration: Yes • Generator cell: Diaphragm optional • Task list (max.): 10 • Flexibility and Modularity: Continuous Operation Mode, Automation, Membrane (KF), KF Upgrade Options, PC Software, One Click User Interface, Additional Sensor Cards, Custom Calculations, Pre-Installed Methods, SmartSample, Liquid Handling, Additional Burettes, Expandability, Plug & Play Accessories, Weigh value transfer, SmartChemicals, Solvent Manager, user management • End point titration: Yes • Plug & Play functionalities: burettes and sensors • Terminal: Color touchscreen with status light • Drying oven (optional): DO308 (manual) • Expandability: Yes, to T9 • Compliance and data security: Password protection, 21 CFR Part 11, EudraLex, Volume 4, Annex 11 (with LabX software), user management (fully configurable) • Printer port: Yes (USB) • Connectivity and software: LabX software, network export, USB export • Languages: Chinese, English, French, German, Italian, Korean, Polish, Portuguese, Russian, Spanish
Clamping ring for titration stand
Stopcock with PTFE valve disc (standard)
Low Retention LTS Tips, Sterilized, for Rainin pipettes with LTS™ LiteTouch™. Easily pipette proteins, enzymes and DNA The superhydrophobic tip surface minimizes liquid retention. Less sample retention means less waste, better performance. Convenient tip rack Innovative new tip rack features a special "bi-functional" hinged/lift-off lid and front latch for secure, one-handed operation. Fast loading, protects tips from contamination and autoclavable. LTS tip design Feel the difference with the Rainin LiteTouch System. LTS dramatically reduces the amount of force required to load and eject tips. The result: less fatigue and less stress on hands and arms.
Manual titration kit including titration stand, compact stirrer & 2 standard propellers
Glass reference electrode suitable as an electrical reference in ion selective measurements as well as for pH or metal half cell electrodes both in aqueous and non-aqueous media. • Double junction construction • Movable ground glass sleeve junction • Variable bridge electrolyte to adapt electrode performance to the sample matrix • ARGENTHAL™ reference system • KCl 3 mol/L AgCl sat (reference electrolyte), KCl 3 mol/L, KNO3 1 mol/L and Al2(SO4)3 0.9 mol/L (bridge electrolytes) included in standard delivery • Integrated glass sleeve for secure fixation in the titration head • Integrated connection cable • Individual quality certificate
Gas inlet for DV750 SET for KF titration with titration stand
Plug & Play combined platinum ring redox electrode Combined platinum ring redox electrode with a ceramic frit for redox titrations with change of the pH value. The DMi144-SC is a dedicated electrode for automatic COD determinations on the Rondo 20 COD rack. Plug & Play sensor with integrated sensor chip for secure handling. Application: • Oxidation with potassium permanganate (kappa value) • Cerium sulfate (vitamin E, gold determination) • Iodine (copper determination) • 2,6-Dichlorophenol-indophenol (vitamin C) • Reduction with thiosulfate (back titration reagent for iodometric determinations) • Ammonium ferrous sulfate (back titration reagent for a variety of oxidation reactions) Features and Benefits • Sensor Chip • Ceramic frit junction • Pure platinum sensing element • ARGENTHAL™ reference system • Refillable reference electrolyte (3 mol/L KCl)
Automated titration above room temperature The chemistry involved in titration analysis sometimes requires elevated temperatures to ensure sample dissolution or reaction completion both during sample preparation as well as the actual titration. With the new DH100 heating system all these tasks can be performed with ease. Description: Typical applications which require elevated temperature are e.g. the determination of the saponification value, certain oxidations (e.g. reducing sugars according to Rebelein) or complexometric titrations (e.g. determination of aluminium). With the new DH100 heating system all these tasks can be performed with ease. The system allows both controlled heating as well as temperature control during titration up to a maximum temperature of 100°C. • The set temperature is easily programmed at the temperature controller. It controls the heating of the DH100 immersion heater dependent on the actual temperature measured by the DH100 temperature sensor. The optimized heater control enables fast heating to the set temperature for a variety of solvents. • The immersion heater as well as the temperature sensor are made of Hastelloy C22 - an alloy especially for harsh oxidative and acidic environments. Thanks to the overheating protection within the immersion heater, process safety is guaranteed since the system is immediately shut down if the maximum temperature is exceeded. • The titrator activates or deactivates the heating process by triggering the DH100 temperature controller and also monitors the heating process by measuring the actual temperature via the DH100 temperature sensor. When the heating should actually occur is defined by the method. • The DH100 temperature system is a complete system for direct heating of samples that can be used with the Titration Excellence titrators as well as in combination with the Rondo and Rondolino sample changers.
The DO308 drying oven is the ideal accessory for the METTLER TOLEDO volumetric or coulometric Karl Fischer titrators. It allows easy and accurate water determination of solid or viscous samples like: Substances that release water only at elevated temperatures such as plastics in powder or granular form Substances that cause side reactions with Karl Fischer reagent such as oxidizing inorganic salts Substances that cause problems in the titration vessel due to their consistency such as fibrous or pasty substances Substances that are poorly soluble or insoluble such as wool, dough, tar or coal Technical data DO308: Temperature range: 40 - 300 °C Temperature accuracy: ±5 °C (@300°C) Footprint housing: 256 x 180 mm Dimensions overall: 500 x 220 mm Voltage (auto selection): 100 ... 230 VAC Max. power consumption: 450 W Height: 390 mm Weight: 9.1 kg
Robust coulometric Karl Fischer titrator. The C10SX introduces the solid performance, simple operation and space saving design of the Compact KF Coulometers. Accurate results from 1 ppm to 5% water. Up to 4 shortcuts per user + 5 analysis methods. Ideal for routine trace water KF analysis. Special titration cell design minimizes ambient moisture interference for a low background drift value, ensuring accurate and repeatable measurements. • One click user interface • Automatic emptying and filling of the titration cell • LabX Software: no • Max. number of methods: 5 • Samples per analysis (max.): 120 • without diaphragm • Flexibility and modularity: Plug & Play Accessories, weighing value transfer, one-click user interface, pre-installed methods, user management • Drying oven (optional): DO308 (manual) • 5.7” (145mm) color VGA touchscreen • Languages: Chinese, English, French, German, Italian, Korean, Polish, Portuguese, Russian, Spanish
Screw for titration vessel
Glass tube set for oil (Stromboli V2.0)
SP280 Peristaltic Pump (for waste) with novoprene tube set
Power Supply Set for T50/T70/T90 (SP)
Plastic lid for titration vessel 100 ml
Pump tubing for DV704 Titration Stand
The G20S extends usability with the same space saving design as the Compact titrators. Supports 150 analysis methods with 12 method functions + 12 shortcuts per user, plus LabX Express software. For multiple routine titrations and users. The G20S manages multiple applications with ease thanks to expanded analysis methods, method functions, shortcuts and software options. With the intuitive One Click touchscreen interface, you may customize the home screen to run your workflows quickly and easily with a single tap on the screen. • Application Type: Potentiometric • Measurement type: Chromatometric, Amperometric display, Diazotitration, Redox, Complexometry, Direct measurement (ion-selective), Addition of multiple standards, Potentiometric, Precipitation, Voltametric display, Single and two-phase (surfactants), Photometric, Cerimetric, Bromatometric, Acid/Base, Arsenometric • Flexibility and modularity: Automation, Plug & Play Accessories, Weight Transfer, SmartChemicals, PC Software, One Click User Interface, Custom Calculations, Pre-installed Methods, User Management • Automation option: Rondolino • 5.7 (145mm) color VGA touchscreen • Languages: Chinese, English, French, German, Italian, Korean, Polish, Portuguese, Russian, Spanish
Documents for installation and qualification for KF titrators V10S/V20S/V30S
Accessories for the Mettler-Toledo titrator
Dosing tube with tip with siphon tip 70 cm for burettes DV9xx/DV10xx
Reference electrode with break-proof plastic shaft suitable as an electrical reference in ion selective measurements - for applications in hydrofluoric acid containing samples. Features: • Screwable, exchangeable outer shaft containing fixed outer fiber junction • Movable sleeve adapter for position adjustment • Ag/AgCl reference system • Bridge electrolytes (3 mol/L KCl, 1 mol/L KNO3, 20 mL each) included in standard delivery • S7 screw cap • Detachable cable • Individual quality certificate • Unique serial number • Anwendungen: acid/base aqueous / ISE
Magnetic stirrer for DL15, DL22F&B and DL28
Plug & Play combined glass pH electrode Combined glass pH electrode with a movable, easy-to clean sleeve junction. Direct pH measurement and acid/base titrations in difficult, aqueous matrices (plating baths, precipitate-, sulfide containing samples) as well as in non-aqueous media. Plug & Play sensor with integrated sensor chip for secure handling. Features and Benefits • Sensor Chip • Double junction construction, comprising separate, refillable chambers for bridge and reference electrolyte • Movable PTFE sleeve junction • ARGENTHAL™ reference system • Refillable reference and bridge electrolyte (Standard 3 mol/L KCl)
EasyPlus™ Titration sensor. This double platinum pin sensor for Karl Fischer and redox titrations is specially developed for use with EasyPlus™ Titrators.
Combined silver ring electrode for argentometric titrations. Titrations of halides, sulfides, hydrogen sulfide, mercaptans and cyanides in aqueous medium. • Plug & Play combined silver ring electrode with a movable easy-to-clean sleeve junction for precipitation titrations • Sensor Chip • Ceramic frit junction • Pure silver sensing element • ARGENTHAL™ reference system • Refillable reference electrolyte (1 mol/L KNO3)
Curved drying tube for Coul.KF
Conductivity board for Titration Excellence line titrators. The conductivity board comes with the following inputs: • Conductivity input with temperature input • pH/mV sensor input • Temperature input • COM interface Technical specifications: Conductivity: Measuring range: 0…1000 mS(7 measuring ranges, automatic measuring range change) Resolution of μS range: 0.01 μS Resolution of mS range: 0.001 mS Limits of error: 0.5% of the value shown Temperature probe: NTC 30 k Resolution / Limits of error (Temp.): 0.1 °C /0.2 °C Connector: 8-pin Mini-DIN pH/mV input: Measuring range: +/- 2000 mV Resolution / limits of error: 0.1mV / 0.2mV Impedance: > 1012 Ohm Technique: Differential amplifier with reference input Connector: Triaxial Temperature input: Connector: 4-pin LEMO Sensor: Pt1000 Resolution / Limits of error: 0.1 °C /0.2 °C COM interface: Connector: 9-pin male D-sub
Platinring-Elektrode für alle Arten von Redox-Titrationen. Speziell entwickelt für EasyPlus™ Titratoren, liefert sie genaue und zuverlässige Ergebnisse. Messungstyp: Chromatometrisch, Potentiometrisch, Redox, Cerimetrisch, Bromatometrisch Sensortyp: Metall-Sensoren This platinum ring sensor for all types of redox titrations is specially developed for use with EasyPlus™ Titrators for accurate and reliable results. Measurement Type: Chromatometric, Potentiometric, Redox, Cerimetric, Bromatometric. Type of Sensor: Metal Sensors
Plug & Play combined platinum ring electrode Combined platinum ring electrode for redox titrations. The electrode has a junction-free bulb glass reference, which cannot be blocked by precipitates. Application examples: • Bromatometric, iodometric and cerimetric titrations according to European Pharmacopeia and USP • Determination of Indigo and Hydrosulfite • Peroxide number in oils Plug & Play sensor with integrated sensor chip for secure handling. Features and Benefits • Sensor Chip • Maintenance-free glass pH bulb reference: no refilling of electrolyte required • Pure platinum ring sensing element
Dosing Unit for dosing and titration purposes with the Titration Excellence line. 20cm CAN cable included.
Combined silver ring electrode for argentometric precipitation titrations of halides, sulfides, hydrogen sulfide, mercaptanes and cyanides with change of the pH value in aqueous medium. Application: • Salt content (rock salt, NaCl) in ketchup, food, vegetable juices • Sulphide content of green and black liquor in the pulp and paper industry • Silver content of silver alloys Features and Benefits: • Ceramic frit junction • Pure silver sensing element • Integrated glass sleeve for secure fixation in the titration head • ARGENTHAL™ reference system • Refillable reference electrolyte (1 mol/L KNO3) • 25 mL of reference electrolyte (1 mol/L KNO3) included in standard delivery • S7 screw cap • Detachable cable
Please fill out your contact data and your information request, we will contact you as soon as possible with all requested information.
Please fill out your contact data and your information request, we will contact you as soon as possible with all requested information.
