Incubator IF Incubators for research, medicine, pharmaceuticals and food technology. Organic chamber loads require gentle heating. For this reason, the heating and control system are especially optimised for low temperatures of up to +80 °C. Specifications: • forced air circulation • with SingleDISPLAY • working-temperature range at least 10 °C above ambient temperature to +80 °C • setting range +20 °C to +80 °C • Setting accuracy 0,1 °C • outside stainless steel door • inside glass door • electronically adjustable air flap from 0 to 100 % in 10 % steps and adjustable fan speed from 0 % to 100 % in 10 % steps • Ethernet interface for reading out protocol log, double overtemperature protection • internal data logger with storage capacity of at least 10 years • calibration facility; works calibration certificate at +37 °C • Housing and interior made of stainless steel • voltage: 230 V, 50/60 Hz
4 - 20 mA current loop interface; Temperature controller, actual value (0 to +100 °C = 4 - 20 mA)
Universal oven UF Precise drying, heating, tempering, aging, baking, testing and hardening in research, science, industry and quality assurance. This universally usable heating and drying oven is the Memmert classic for temperature control in science and research as well as for material tests in industry. The technologically perfected masterpiece made of high-quality, hygienic, easy-to-clean stainless steel leaves nothing to be desired in terms of ventilation technology, control technology, excess temperature protection and precisely coordinated heating technology. Whether you are carrying out material tests, aging computer chips, running complex test series with highly sensitive loads, drying or tempering electronic components, hardening synthetic resin or heating up plasticine, the Memmert heating oven / drying oven U stands for unsurpassed precise, even and gentle temperature control. Specifications: • Forced air circulation, with SingleDISPLAY • Working temperature range at least 10 °C above room temperature up to +300 °C, • Setting temperature range +20 °C to +300 °C • Setting accuracy: up to 99.9 °C: 0.1 °C / from 100 °C: 0.5 °C • Stainless steel door • Electronically adjustable air flap from 0 to 100 % in 10 % steps and adjustable fan speed from 0 % to 100 % in 10 % steps • Ethernet interface for reading out the protocol data • double over-temperature protection • Integrated data logger with storage capacity for at least 10 years • Setting of 3 calibration values each on the ControlCOCKPIT; • Works calibration certificate at +160 °C • Housing and interior made of stainless steel • Voltage: 230 V, 50/60 Hz (sizes 30 - 260), 400 V (sizes 450 - 1060)
Calibration at Memmert factory for a freely selectable temperature, humidity, CO2 and O2 value (requires option T6)
Fresh-air filter (filtration efficiency 80 %) mounted at the device bottom (for devices with forced air circulation, sizes 30 - 260 require castor frame R9 or subframe)
Temperature restriction; Temperatures: +60, +70, +80, +95, +100, +120, +160, +180, +200 or +250 °C (Please indicate upon ordering)
Calibration at Memmert factory for three temperature values: +50, +100, +160 °C at 20 mbar pressure (price per thermoshelf). Service for VO vacuum ovens
Calibration at Memmert factory for a temperature value: +37 °C.
Potential-free contact for combination error message (e.g. supply failure, sensor fault, fuse)
Extension of IQ/OQ document at Memmert factory by an additional freely selectable temperature and humidity value
Entry port with 23 mm clear diameter, can be closed, individual position (please state position); rear
MobileALERT, notification by SMS in case of any error or alarm of the device (requires option H6)
Calibration on site for a freely selectable temperature value (travel costs are not included yet)
Humidity Chambers HCP The Memmert humidity chamber HCP - This climate chamber offers a full range of comfort, reliability and safety. This humidity chamber is ideally suited for environmental testing, environmental simulation, accelerated service life tests and 85/85 tests according to IEC 60068-2-67 and IEC 60068-2-78. The active humidity control is the guarantee for ideal homogeneity of temperature and humidity as well as for short recovery times after opening the door. In combination with heating on all six sides, including heated inner glass door, it also minimises vaporisation in the interior and thus the risk of condensed water dripping onto the test object. An aluminium thermal conductive layer supports optimum temperature distribution and serves as a heat accumulator in case of a temporary power failure. Model variant TwinDISPLAY: ControlCOCKPIT with two colour displays Specifications Setting range active humidity control: 20 to 95 % rh Setting accurate humidity: 0.5 % rh Working temperature range: at least 7 °C above ambient up to +90 °C Setting temperature range: +18 °C to +90 °C Setting accurate temperature: 0.1 °C Power supply: 230 V, 50/60 Hz
IQ/OQ document with device-specific works test data, including temperature distribution survey with 27 temperature measuring points (sizes 110 - 1060, 2200), 26 temperature measuring points (size 1400) and 1 humidity measuring point in centre of usable space at Memmert factory for a freely selectable temperature and humidity value according to DIN12880:2007-05 (PQ check list as support for validation by customer)
OQ requalification on site including temperature distribution survey with 27 temperature measuring points and 1 humidity measuring point in centre of usable space for a freely selectable temperature and humidity value according to DIN12880:2007-05 (requires option K7) (travel costs are not included yet)
Entry port with 57 mm clear diameter, can be closed by flap, individual positions in the back wall (please state position, not possible for devices with forced air circulation of sizes 30-75)
IQ/OQ Qualifizierung vor Ort einschließlich Temperaturverteilungsmessung mit 27 Temperatur-Messpunkten und 1 CO2-Messpunkt in Nutzraummitte für einen frei wählbaren Temperatur- und CO2-Wert nach DIN 12880: 2007-05 (zzgl. Reisekosten)
Chamber modification for the application of reinforced perforated stainless steel shelves or stainless steel grids (bearing rails mounted in the working chamber) - includes replacement of standard grids by reinforced grids (ICHeco/ICH)
Extension of IQ/OQ document at Memmert factory by an additional freely selectable temperature, humidity and CO2 value (requires option K7)
Door-open-recognition (only for units with TwinDISPLAY); Three (one each door)
Calibration at Memmert factory for three temperature values: +37, +52, +70 °C
Entry port with 23 mm clear diameter, can be closed, standard position (F0 and F2 not for model size 260 with light module; F0 - F3 not for model size 110 with light module); left centre/top
Battery-buffered ControlCOCKPIT: Uninterrupted supply for the entire display unit (ControlCOCKPIT) and therefore complete documentation of all parameters even when there is a power failure. The CO2 parameter is continously regulated
Signal cable (3 m) for control of rotation speed and optimising pump performance by demand-controlled activation of purge of Memmert pump (not required with pump module)
MobileALERT for up to 4 alarm notifications (requires K6 or K7); notification by SMS; temperature and CO2 alarm (standard), additionally humidity alarm (when equipped with option K6 or K7) and O2 alarm (when equipped with option T6)
OQ check list with device-specific works test data, including temperature distribution survey with 27 temperature measuring points and 1 humidity measuring point in centre of usable space at Memmert factory for a freely selectable temperature and humidity value according to DIN12880:2007-05 (PQ check list as support for validation by customer)
Stainless steel slide-in drip tray, 15 mm rim (may affect the temperature distribution)
Vacuum connecting hose (3 m) from oven to Memmert pump incl. optimised connection accessories (partially stainless steel), (not required with pump module)
Calibration on site for an freely selectable temperature and humidity value (travel costs are not included yet)
4 - 20 mA current loop interface (requires option T5); Temperature of a Pt100 sensor positioned flexibly in chamber for external temperature monitoring - price per sensor
IQ/OQ document with device-specific works test data, including temperature distribution survey with 27 temperature measuring points and 1 humidity measuring point in centre of usable space at Memmert factory for a freely selectable temperature and humidity value according to DIN12880:2007-05 (PQ check list as support for validation by customer)
External control and logging package consisting of mini-Notebook and software “Celsius“, pre-configurated, and lateral swivel arm
Light module cold white 6,500 K + warm white 2,700 K: LED light strips - 10 strips for model 110, 14 for model 260/410/750 - (5 resp. 7 alternating cold white light strips and 5 resp. 7 warm white light strips) on the side walls of the interior, programme-controlled dimming from 0 to 100 % (in 1 % steps), ramp programming in combination with temperature (only with TwinDISPLAY; not in combination with F6)
Incubator Im INm The incubator Im is a Class I medical device. The heating of this incubator is optimally tuned for natural convection and valuable chamber loads for research, pharmaceutics, medicine and food chemistry are warmed up very carefully. Specifications: • Natural convection • With SingleDISPLAY • Working-temperature range at least 5 °C above ambient temperature to +80 °C • Setting range +20 °C to +80 °C • Setting accuracy 0,1 °C • Outside stainless steel door • Inside glass door, electronically adjustable air flap from 0 to 100 % in 10 % steps • Ethernet interface for reading out protocol log • Double overtemperature protection • Internal data logger with storage capacity of at least 10 years • Calibration facility • Works calibration certificate at +37 °C • Housing and interior made of stainless steel • Voltage: 230 V, 50/60 Hz
Gas inlet/outlet through 2 tubes with ball valves - technical clarification required for combination with other options
Battery-buffered ControlCOCKPIT: uninterrupted supply for the entire display unit (ControlCOCKPIT) and therefore complete documentation of all parameters even when there is a power failure
Pump device for continuous circulation of the tempering medium. Voltage 230 V, 50/60 Hz. (requires installation and connection set B48813) (not in combination with CDP115 /CDP115X2)
OQ requalification on site including temperature distribution survey with 27 temperature measuring points, 1 humidity measuring point and 1 CO2 measuring point in centre of usable space for a freely selectable temperature, humidity and CO2 value according to DIN12880:2007-05 (requires option K7) (travel costs are not included yet)
Vacuum pump with chemically resistant 4x diaphragm, pump capacity at atm. pressures: approx. 50 Nl./min = 3,0 m<sup>3</sup>/h and autom. purge control, 230 V, 50 Hz. Max. guarantee period 2 years (requires acessories B39410 and B04026)
Constant Climate Chambers HPPeco Thanks to unbeatable energy efficiency and low-maintenance operation, the HPPeco constant climate chambers are perfectly suited for stability tests, environmental testing and materials testing. The high precision temperature control as well as the active humidification and dehumidification were particularly adapted to the ICH guidelines, option Q1A, for stability tests. •LED light module for sizes 110 to 750 (as an option): dimmable LED light in three alternative colour temperatures (cold white light, warm white light or cold white and warm white light, dimmable in steps of 1 %) •Heating and cooling seamlessly with one system thanks to Peltier technology. Almost vibration-free and extremely quiet TwinDISPLAY: ControlCOCKPIT with two TFT colour displays Working temperature range sizes 110 - 1060 Without light, without humidity: 0 (at least 20 below ambient temperature) ... 70 °C Without light, with humidity: 5 (at least 20 below ambient temperature) ... 70 °C Working temperature range sizes 110 - 750 With light, without/with humidity: 15 ... 40 °C Working temperature range sizes 1400 - 2200 Without light, without humidity: 0 (at least 20 below ambient temperature) ... 70 °C Without light, with humidity: 15 (at least 10 below ambient temperature) ... 60 °C Setting accuracy temperature: 0.1 °C Setting ranges humidity Sizes 110 - 1060: 10 ... 90 % rh Sizes 1400 - 2200: 10 ... 80 % rh Setting accuracy humidity: 0.5 % rh Power supply: 230 V, 50/60 Hz
Integration of one additional unit (up to max. 31 units) into an already existent FDA-software licence (only for units with TwinDISPLAY)
Software conforming to FDA ”Celsius FDA Edition“. Meets the requirements for the use of electronically stored data sets and electronic signatures as laid down in Regulation 21 CFR Part 11 of the US Food and Drug Administration (FDA). Base licence for the control of one unit
Central water supply without filter cartridges for connection to the domestic water supply (only for demineralised water with a conductivity of 5 to 10 µS/cm and a pH value between 5 and 7). Product information on demand
Maintenance on site WTB according to Memmert maintenance plan (available on request) (travel costs are not included yet)
4 - 20 mA current loop interface; Humidity controller, actual value (0 to 100 % rh = 4 - 20 mA)
Extension of IQ/OQ qualification or OQ requalification on site by an additional freely selectable temperature and humidity value (requires option K7)
Please fill out your contact data and your information request, we will contact you as soon as possible with all requested information.
Please fill out your contact data and your information request, we will contact you as soon as possible with all requested information.
