Wagner & Munz GmbH Laborkatalog

72.742.0001 - Stativstangen TG200

Retsch GmbH & Co KG / Zerkleinern

Rods, smooth for TG 200, 1 pair

200.00 €

Backenbrecher BB 50

Retsch GmbH & Co KG / Zerkleinern

Jaw Crusher BB 50 200-240 V, 50/60 Hz breaking jaws. Table model for fast and effective coarse and pre-shredding of hard, brittle and tough materials. Digital, stepless gap adjustment with scale, high final fineness up to 0.5 mm. Enlarged foldable filling funnel, removable breaker arm for easy cleaning, adjustable speed allows adjustment to the sample material, comfortable control panel with digital display, storage of the gap width, zero point adjustment for wear compensation.

15,250.00 €

Backenbrecher BB 200

Retsch GmbH & Co KG / Zerkleinern

Jaw Crusher BB 200 for fast and effective coarse and pre-shredding of hard, brittle and tough materials. Stepless gap adjustment with scale and zero point adjustment for wear compensation. High final fineness, robust construction, equipment with foldable safety funnel, collecting container with safety switch and cladding. Standard design with manganese steel jaws. Versions with crushing jaws made of stainless steel or tungsten carbide on request. Large throughput, stepless gap adjustment, brake motor with safety switch, final fineness: approx. 2 to 5 mm (depending on device and sample), easy cleaning of the crushing chamber.

60,310.00 €

Backenbrecher BB 300

Retsch GmbH & Co KG / Zerkleinern

Jaw Crusher BB 300 for fast and effective coarse and pre-shredding of hard, brittle and tough materials. Stepless gap adjustment with scale and zero point adjustment for wear compensation. High final fineness, robust construction, equipment with foldable safety funnel, collecting container with safety switch and cladding. Standard design with manganese steel jaws. Versions with crushing jaws made of stainless steel or tungsten carbide on request. Large throughput, stepless gap adjustment, brake motor with safety switch, final fineness: approx. 2 to 5 mm (depending on device and sample), easy cleaning of the crushing chamber.

99,430.00 €

22.048.0025 - Brechbacken BB 300

Retsch GmbH & Co KG / Zerkleinern

Crushing jaws for BB 300, tungsten carbide, 1 set, for jaw crusher 20.061.0001.

38,300.00 €

22.048.0024 - Brechbacken BB 200

Retsch GmbH & Co KG / Zerkleinern

Breaking jaws for BB 200, 1 pair. Available in four different materials. • Manganese steel: is a material that compresses the structure through pressure and thus further hardens over time (lime hardener). • Stainless steel: Is recommended if rust formation is to be expected if the feed material is not too hard. • Tungsten carbide: Is the abrasion-resistant and purest material. It offers increased service life even with materials with Mohs hardness 7-8. • Steel 1.1750: is ideally suited for the heavy metal-free crushing of non-extremely abrasive feed material (e.g. building rubble, soil samples, road surface).

16,000.00 €

22.048.0021 - Brechbacken BB 300

Retsch GmbH & Co KG / Zerkleinern

Breaking jaws for BB 300, 1 pair. Available in four different materials. • Manganese steel: is a material that compresses the structure through pressure and thus further hardens over time (lime hardener). • Stainless steel: Is recommended if rust formation is to be expected if the feed material is not too hard. • Tungsten carbide: Is the abrasion-resistant and purest material. It offers increased service life even with materials with Mohs hardness 7-8. • Steel 1.1750: is ideally suited for the heavy metal-free crushing of non-extremely abrasive feed material (e.g. building rubble, soil samples, road surface).

27,590.00 €

02.460.0098 - Mörser RM 200 / RM 100

Retsch GmbH & Co KG / Zerkleinern

Mortar for Mortar grinder RM 200 / RM 100, different material

3,350.00 €

Mahlkugeln Zirkonoxid

Retsch GmbH & Co KG / Zerkleinern

Grinding ball zirconium oxide, different diameters and volumes, approx. 500 g

733.00 €

20.520.0001 - Planeten-Kugelmühle PM 100 CM

Retsch GmbH & Co KG / Zerkleinern

Planetary Ball Mills are suitable for mixing and grinding soft, medium-hard, extremely hard, brittle and fibrous materials. They are used whenever high degrees of fineness down to the submicron range are to be achieved in a very short time. In addition to dry and wet grinding, they are also suitable for colloidal grinding and mechanical alloying. Typical materials are minerals, ores, chemicals, ceramics, soils, household and industrial waste etc. The PM 100 CM is a Planetary Ball Mill with a speed ratio of 1:-1. Size reduction is not so much achieved by impact but by pressure and friction which is more gentle on the material. Features: • Extremely high ultimate fineness down to submicron range • 1, 2 or 4 grinding stations • Grinding jar volumes from 12ml to 500ml • Suitable for long-term trials and continuous use • Programmable starting time • Power failure back-up ensures storage of remaining grinding time • Reproducible results due to digital parameter setting • 10 parameter combinations can be stored • Single button operation with graphic display • Automatic grinding chamber ventilation for cooling the grinding jars • Grinding jars in 7 sizes and 8 different materials available

Price on request

Category

Trademark

Material

Form

Typ

72.742.0001 - Stativstangen TG200

Backenbrecher BB 50

Backenbrecher BB 200

Backenbrecher BB 300

22.048.0025 - Brechbacken BB 300

22.048.0024 - Brechbacken BB 200

22.048.0021 - Brechbacken BB 300

02.460.0098 - Mörser RM 200 / RM 100

Mahlkugeln Zirkonoxid

20.520.0001 - Planeten-Kugelmühle PM 100 CM

MONTHLY TOP PRODUCTS

Glastür, Rechtsband, statt weißer Tür

Medikamenten-Gefrierschrank FROSTER MED 95 PRO-ACTIVE

Schubfach schwarz für LABEX-520 und FROSTER-LABEX-530

Category

Trademark

Material

Form

Typ

MONTHLY TOP PRODUCTS

Glastür, Rechtsband, statt weißer Tür

Medikamenten-Gefrierschrank FROSTER MED 95 PRO-ACTIVE

Schubfach schwarz für LABEX-520 und FROSTER-LABEX-530

Contact form

You have any questions on our shop or to one of our products?

Catalog request

You have any questions on our shop or to one of our products?

Are you a company or a private?