Wagner & Munz GmbH makes use of Cookies
to be able to adapt the website to the needs of our users. If you continue using this page, you agree that cookies can be used for this purpose. Click here for further information.Accept
DURAN® micro burette. Conformity certified, blue print, main points ring graduation, Schellbach stripe, straight PTFE stopcock, PTFE stopcock at the filling tube, accuracy class AS, batch certificate.
DWK Life Sciences GmbH (Duran) /
Gefäße Verbrauchsmaterial
DURAN® GLS 80® Laboratory Bottle Wide Mouth Amber. USP <660> and USP <671>
(Spectral Transmission) compliant.
Without screw-cap and pouring ring.
With easy-to-read scale and large labelling field for easy marking, in fired-on, highly
durable white ceramic. Complete with blue quick release closure (PP, integral lip
seal) and pouring ring (PP) for drip-free pouring and clean, safe working. Service
temperature limit of closure and pouring ring: +140°C. Alongside easy handling, UV
protection up to 500 nm. Unchanged DURAN® properties within the bottle, as
colouration is only to the outer surface. Very uniform, durable and chemically
resistant amber colour due to use of innovative technology.
With batch identifier.
Autoclavable at 121°C.
Typical applications: storage, transport and safekeeping of light-sensitive
substances, easy to use with granulated material, powders and viscous media.
DURAN® Triple-Neck Round Bottom Flask. With standard ground joint, inclined side necks. Thanks to the uniform wall thickness, round bottom flasks are ideal as heating vessels. The geometry permits very uniform heating. Depending upon the application, accessories, columns, thermometers, dropping funnels, boiling capillaries, etc. can be fitted.
DWK Life Sciences GmbH (Duran) /
Gefäße Verbrauchsmaterial
PP Tamper-evident screw caps for Laboratory bottles with DIN thread. With PTFE silicon seal.
Temperature resistance: max. +140°C.
The integral plastic ring tears when the cap is first opened and is retained on the bottle neck. Therefore it can be clearly seen whether the bottle retains its original seal. After first untwisting, can be used as "normal" screw cap.
DWK Life Sciences GmbH (Duran) /
Gefäße Verbrauchsmaterial
DURAN® Round Bottom Flask Narrow Neck. With beaded rim. DIN ISO 1773. Glass Type I / neutral glass as per USP, EP and JP. Autoclavable. Uniform wall thickness distribution makes these flasks ideal for heating applications. Flasks with a
neck diameter of 65 mm or more have a reinforced rim.
DURAN® Flat Flange Lid. With centre neck NS 29/32. Pressure and vacuum resistant. 1 bar max. operating pressure at 250°C. Glass Type I / neutral glass as per USP, EP and JP. Autoclavable at 121°C.
DWK Life Sciences GmbH (Duran) /
Gefäße Verbrauchsmaterial
DURAN® Test tube. Without beaded rim. The test tubes are thick-walled and therefore mechanically very resistant, yet still retain good thermal shock resistance. Glass Type I / neutral glass as per USP, EP and JP. Autoclavable at 121°C.
DURAN® Flat Flange Lid. 4 standard ground necks. Centre neck NS 29/32. With side necks (NS): 2 x 29/32 angled, 1 x 29/32 parallel. Pressure and vacuum resistant. 1 bar max. operating pressure at 250°C. Glass Type I / neutral glass as per USP, EP and JP. Autoclavable at 121°C.
DWK Life Sciences GmbH (Duran) /
Gefäße Verbrauchsmaterial
Screw Cap Bottle Round, Amber amber, from Soda-lime-glass. With thread, high form. A maximum usage temperature of + 100 °C is recommended.
Thermal shock resistance 30 K. Hydrolytic class 3.
DURAN® Filter funnel. From DURAN® glass with its good thermal shock and chemical resistance. Filter funnels mate to the filtering flask via a cnical rubber seal (GUKO).
Capacity: 500 mL.
Typical applications: qualitative inorganic analysis and preparative chemistry.
Autoclavable at 121°C.
Glass type corresponds to USP, EP and JP guidelines (JP does not apply to amber color).
DURAN® Liebig Condenser (West Condenser). With 2 screw-on plastic hose connections und 2 standard ground joints. Relatively small heat exchange surface and thus relatively low cooling capacity.
DURAN® Baffled Flask. With GL 45. With 4 bottom baffles. Complete with membrane screw cap and pouring ring.
• Oxygen introduction is often a limiting factor for cell growth.
• Baffled flasks cause a turbulent flow, increase the gas exchange surface and produce a higher oxygen transfer.
• Automated one-step production enables a reproducible and comparable result.
DWK Life Sciences GmbH (Duran) /
Gefäße Verbrauchsmaterial
PP Tamper-evident screw caps for Laboratory bottles with DIN thread. With lip seal.
Temperature resistance: max. +140°C.
The integral plastic ring tears when the cap is first opened and is retained on the bottle neck. Therefore it can be clearly seen whether the bottle retains its original seal. After first untwisting, can be used as "normal" screw cap.
DWK Life Sciences GmbH (Duran) /
Volumenmessgeräte
DURAN® Volumetric Flask, class B. With scribed graduation mark and polyethylene stopper. White printed image. Calibrated to contain (IN). DIN EN ISO 1042.
DURAN® Filter funnel. Conical shape. Made from DURAN® glass with its good thermal shock and chemical resistance. Filter funnels mate to the filtering flask via a conical rubber seal (GUKO).
Typical application: filtering of liquids.
Autoclavable at 121°C.
Glass type corresponds to USP, EP and JP guidelines (JP does not apply to amber color).
DWK Life Sciences GmbH (Duran) /
Gefäße Verbrauchsmaterial
Reagent bottle Narrow Neck. Soda-lime-glass. Neck with standard ground joint. With standard ground glass flat-head stopper.
A maximum usage temperature of +100°C is recommended. Thermal shock resistance
30 K. Hydrolytic class 3. Note on using DURAN® glass stoppers with soda-lime glass
bottles: If the bottle and the stopper have a temperature difference greater than 30°C,
the glass stoppers can become stuck!