GC Ferrules Graphite
Graphite Ferrule with 0.8 mm Hole for 1/8" Fittings
Stainless Steel Hexnuts and PEEK Ferrules, 10 Hexnuts & 10 Ferrules Hexnut Fittings : Stainless steel 10-32 thread fittings use a non-swaging Kel-F™ or PEEK™ replaceable ferrule Inert contact surfaces make them biocompatible Ideal for applications where corrosive solvents are being used Hexnut with Kel-F™ or PEEK™ ferrules are recommended for use with SGE GLT™ columns Specifications: Maximum Pressure Rating 5,000psi Thread Type 10-32
SilTite metal - initial installation for Shimadzu GC-2014, GC-2010, GC-17A and GC-14A detector/injectors, and QP5000/5050 standard MS interface (not for MS interfaces or QP2010 injector) (10 ferrules, 2 nuts)
Gas filter - Carrier gas The gas purifier system consists of two key parts: the connecting unit and the filters. The connecting unit has inlet and outlet connectors for the gas lines, and the system can be wall-mounted or fixed to a bench. Connecting units come with a 1, 2 or 4 filter capacity and are available for 1/4" or 1/8" gas lines. Each gas filter consists of adsorbent packed into a transparent and virtually unbreakable, heavy-walled polycarbonate housing.
For Injectors & Detectors at atmospheric pressure e.g. FID (Not for GC-MS)
Splitless with Recessed Gooseneck, for Agilent and Thermo Scientific TRACE 1300 GC
Inlet Liners tapered with quartz wool pre-fitted o-ring and TI deactivation for Agilent and Thermo Scientific TRACE 1300 GC
Manual Diamond MS Syringes, PTFE Plunger Tip, Removable Needle
With the ability to inject down to 50nL with high precision and accuracy, SGE NanoVolume Syringes are perfect for nanovolume capillary chromatography injection. The sample is only drawn up into the needle, not the syringe barrel. When the plunger is depressed, the sample is completely dispensed by the NanoVolume plunger that extends right to the tip of the needle. The plungers and needles are matched sets and must be replaced as a set.
GC Ferrules Graphite
• Reliably seal against the carrier gas pressure in the inlet. • Capable of being pierced and resealing time after time without pieces of the septa being deposited in the GC inlet system. • Does not contaminate or bleed material into the chromatographic system. Features and Benefits: • Premium septum for autosamplers with up to 400 injections per septum. • Comes supplied in a blister pack which prevent absorption from the environment. Recommended Applications: •Premium septa for autosamplers with up to 400 injections per septum.
GC Ferrules Graphite
HT8-PCB GC Capillary Column 8% Phenyl (equiv.) Polycarborane siloxane • Unique ultra high temperature column optimizes for 209 PCB congener separations • Optimized for 209 PCB congener separations
Manual Syringes, Fixed Luer Lock with GT Plunger, GasTight, PTFE Tipped Plunger
Replacement SilTite® Nuts, Split / Splitless Injector
Shimadzu Autosampler syringes, AOC14, AOC17 and AOC 20 Autosamplers, Removable Needle Syringes
Cone Tipped Needle for 10 µL Syringes.
Replacement plunger for Removable Needle CTC/Thermo Syringe with GT Plunger
HPLC Unions are specifically designed and precision engineered for use in capillary LC. The ideal way to avoid any void or dead volume in a connection is to achieve a faultless butt connection. Features and Benefits • Zero dead volume design for no peak dispersion. • Easy to use. • Complete versatility - allows connection to the same or different sized tubing. • Available in PEEK and stainless steel. • Stainless steel unions can be finger tightened or tightened with a 3/16" wrench for high-pressure applications. • PEEK unions can be finger tightened. They are slightly larger than stainless steel unions but also lighter - less stress on your tubing. Recommended Applications ProteCol® Unions and reusable PEEK ferrules allow you to connect any combination of: • 1/32" PEEKsil®. • 1/16" PEEKsil. • 0.36 mm fused silica tubing. Use for connecting guard or trap columns to analytical columns, or for bypassing the analytical column. Connections | HPLC Unions Perfect Connections, Every Time PEEK ferrule Fused silica lined PEEK – PEEKsil Product Specifications ProteCol unions are available in either stainless steel or PEEK (for all sizes). All use the same range of reusable PEEK ferrules. Pressure Rating 5000 psi for the stainless steel unions, 2175 psi for the PEEK unions.
SilTite metal nuts 10/32" female thread 1/16" ID hole
eVol® xr digital analytical syringe is the coupling of two precision devices: a digitally controlled electronic drive and an XCHANGE® enabled analytical syringe. eVol xr syringes are easily and quickly changed allowing them to be dedicated to individual liquids or methods to prevent possible cross-contamination of reagents.
The SGE RAX repeating adaptor improves precision and reproducibility when repeatedly dispensing the same volume manually. The RAX is suitable for syringes with capacities from 500 nL through to 500 μL (except those with Plunger Stops, or Diluter / Dispenser Syringes). The one RAX adaptor can be used on both 6.5mm OD and 8mm OD syringe barrels. It has easy to use finger grips and can be set to any desired volume. The RAX can be used as added protection against both plunger blow out at elevated pressures and plunger bending. The flat sides allow it to sit securely on the bench with the needle in a raised position helping to prevent damage from rolling. The RAX is supplied with an innovative double-ended tool to facilitate assembly, it can easily and quickly be installed and if required it can readily be removed, replaced or swapped between syringes.
HPLC Autosampler Syringes, CTC PAL, LC point style, Fixed Needle
Split / Splitless liner with 2.0 mm middle gooseneck for GC-14(SPL-14 Injector)
BP5MS GC Capillary Column •Perfect for your 5% GC-MS analysis. •Optimized Silphenylene content for general purpose MS analyses. Application Areas: 5% GC-MS analyses
Replacement plunger for Removable Needle Agilent Diamond MS Syringe with GT Plunger
Stainless Steel 1/16 " Male-Female Tee Connector and Ferrules •the coupling makes it easy to connect 1/16" OD tubing to an SGE assembly, •provides an inert demountable flow line for 1/16" male fitting .
1.8mm ID Packed column liner for Agilent Technology Models 5880, 5890, 6890
P3 Pyrojector Pelletiser Syringe
SilTite FingerTite Agilent Injector Adaptor (Includes 2 Base Seals) Also Suits Thermo 1300 Injector
Autosampler Syringes, Removable Needle, Shimadzu AOC14, AOC17 and AOC21
Autosampler Syringes,Bruker (Varian) 8035, 8100 and 8200,Removable Needle
Fixed Luer Lock Syringe with GT Plunger & Plunger Stop, GasTight, PTFE Tipped Plunger
15% Graphite/85% Vespel Ferrule with 1 x 0.4 mm Hole & 1 x 0.3 mm Hole for 1/16" Fitting, PK10
SilTite metal - initial installation for 0.10-0.25 mm ID columns (10 ferrules, 2 nuts)
Cone Tipped Needle for 5 µL CTC RTC & Thermo RSH Syringes
PEEKsil™ Injection Loop • Smooth, non-reactive internal bore reduces sample carry-over and sample rinse times. • Reduced sample loss due to shear or adsorption. • Maximum operating pressures are 3000 psi for 10 μL, and 20 μL loops. • Supplied with PEEKsil™ tubing and two sets of stainless steel Hexnuts™ with PEEK™ ferrule fi ttings. • Compatible with most valves including Rheodyne® and Valco®.
Capillary Electrophoresis Tubing • Manufactured from precision bore tubing. • Hydrophobic and hydrophilic surface treatments are available to enable tubing use with proteins, peptides and enzymes. • Wide pH range. • 30, 50, 75 and 100 μm ID. • Column-to-column reproducibility.
Manual Syringes, 25µL to 500µL MicroVolume Syringes, Fixed Needle - Standard Plunger
With the ability to inject down to 50nL with high precision and accuracy, SGE NanoVolume Syringes are perfect for nanovolume capillary chromatography injection. The sample is only drawn up into the needle, not the syringe barrel. When the plunger is depressed, the sample is completely dispensed by the NanoVolume plunger that extends right to the tip of the needle. The plungers and needles are matched sets and must be replaced as a set.
SGE Dispenser and Pump Syringes incorporate Diamond Technology, taking advantage of new and innovative technologies and bringing those benefits to your laboratory. Replacement for Hamilton C and CX Syringes. Product Specifications: • 60 mm stroke. • 1/4-28 UNF thread connection. • 6-32 UNC thread in plunger button. CX has a button stop. • 25 μL to 10 mL capacities. • Operating temperature range (10 °C to 40 °C).
Please fill out your contact data and your information request, we will contact you as soon as possible with all requested information.
Please fill out your contact data and your information request, we will contact you as soon as possible with all requested information.
