Insert with screw-in thread for barrels or screw cap for canisters. With integrated level indicator for monitoring the level during filling as well as socket with GL45 thread for mounting a b.safe funnel with GL45 thread. The red indicator pin rises as the fill level increases. As soon as the indicator pen completely fills the sight glass, the collection container is full and must be replaced. Application Use of a b.safe funnel for filling with simultaneous monitoring of the fill level to prevent overflow.
Fill level indicator for monitoring the fill level while the kegs are being filled. The red indicator pin rises as the fill level increases. As soon as the indicator pen completely fills the sight glass, the collection container is full and must be replaced.
b.safe Power Supply passend für b.safe Display und b.safe Kombi-Signalgeber, Input: AC 100-240 V, 50-60 Hz, 0,5 A, Output: 24 V FC, 0,5 A, inkl. Steckeraufsätzen EU, Australien, USA, Japan und UK
Highly specialized system for the disposal of especially viscous liquids or liquid waste with solid contents. Scope of delivery: - b.safe Funnel 130 made of static dissipative PE-EX with GL 45 cap, hinged lid and sieve - Safety base cabinet T90 in colour RAL7035 (light grey), outer dimensions: W 593 x D 574 x 600 mm, all passages in fire protection compliant design - Telescopic disposal tube made of stainless steel for working height 90 cm with lock nut, canister lid, capacitive fill - level sensor, vent hose and collecting vessel - b.safe Isolated Amplifier including power supply, - b.safe Mini-Display Wall (1 channel) including power supply, for more details see Cat. No. R 658-01 - Signal cable for connecting fill level sensor to b.safe Isolated Amplifier and b.safe Mini-Display - Grounding cable - Two b.safe Canisters S60, volume 10l, made of static dissipative PE-EX, Cat. No. R 236-10 Applications For the safe disposal of all kinds of liquid waste.
b. safe Signal Cabel to connect e.g. Waste Caps with electronic fill level control or sensors to a b.safe Display to monitor the fill level.
b.safe Disc Sensor. Optionally for fill level or empty level control in containers and canisters made of non-conductive materials. The sensor is attached to the outside of the container with the included fastening material (adhesive hook-and-look strips or hook-and-look tabe) at the height of the level to be monitored. Via a Signal Cable (Cat. No. R 645-..), the sensor is connected with an alarm box (b.safe Mini-Display or b.safe Display). The signal cable is not included in the delivery. Not suitable for use in explosive areas or with an Isolated Amplifier. Abmessungen: Connection Stecker / Plug
b.safe Attachment for fire protection. Sheet metal case with gypsum insert for fire protection of cabinet or tube mounts in safety cabinets. Including 8 fastening screws. Abmessungen: For Connection of tube dia. mm max. 28 Outer dimensions (L x Ø) mm 134 x 135 x 38
Ready for installation plastic housing made of ABS (IP66) that prevents accidental contact of live parts. With clearly labelled housing screw connections to connect up to 2 b.safe Filling Level Sensors and to operate them safely in explosion-proof areas. Incl. power supply (90-264 V / 47-63 Hz) with plug adapter for EU, Australia, USA, Japan, and UK. The installation of b.safe Isolated Amplifier and the connection of the signal cable has to be carried out by qualified personnel.
3-way-ball valve with L-bore, stainless steel housing with 3 connections GL25 male and integrated control module, 2 mounted signal cables (length: 2 m), aluminium mounting bracket for wall mount and power supply (input: 100-240V/1,2 A, output: 24V/max. 1,75 A) with plugs for EU, Australia, USA, Japan and UK. Dimensions: L 145 x W 142 x H 189 mm. Connection thread GL25 to install b.safe Waste Tubes. In combination with a b.safe Display for splitter (cat. no. R 653-01) and b.safe Waste Caps with electronic level indicator, the b.safe Splitter allows an automatic filling of two canisters subsequently at one solvent collection point. The b.safe Splitter has to be installed by trained personnel.
Alarm box with aluminium case for an installation in front plates of lab furniture. Front side with touch buttons and LED indicators to monitor the operation and the fill level of the connected sensors. Optical and acoustic main alarm when containers are full. The acoustic main alarm can be deactivated for 3 minutes until an empty container is confirmed. Suitable for b.safe Waste Caps LC / System Waste Caps LC with main alarm and b.safe Waste Caps DLC / System Waste Caps DLC with pre and main alarm. Including power supply (input: AC 100-240 V/50-60 Hz, 0,5 A, output: 24 V DC, 0,5 A) with plugs for EU, Australia, USA, Japan and UK.
Alarm box with aluminium case for an installation in front plates of lab furniture. Front side with touch buttons and LED indicators to monitor the operation and the fill level of the connected sensors. Programmed only to control the b.safe Splitter for monitoring 2 collection containers and an automatic switching from full to empty container. Only optical alarm when reaching the nominal capacity of container 1, optical and acoustic alarm when nominal capacity of both containers is reached. The acoustic main alarm can be deactivated for 3 minutes each until an empty container is confirmed. Suitable for b.safe Waste Caps LC / System Waste Caps LC with main alarm. Including power supply (input: AC 100-240 V/50-60 Hz, 0,5 A, output: 24 V DC, 0,5 A) with plugs for EU, Australia, USA, Japan and UK.
Alarm box with stainless steel case as stand-alone terminal. Front side with touch buttons and LED indicators to monitor the operation and the fill level of the connected sensors. Optical and acoustic main alarm when containers are full. The acoustic main alarm can be deactivated for 3 minutes until an empty container is confirmed. Suitable for b.safe Waste Caps LC / System Waste Caps LC with main alarm and b.safe Waste Caps DLC / System Waste Caps DLC with pre and main alarm. Including power supply (input: AC 100-240 V/50-60 Hz, 0,5 A, output: 24 V DC, 0,5 A) with plugs for EU, Australia, USA, Japan and UK
Alarm box with plastic housing for an installation in front plates of lab furniture. Front side with touch buttons and LED indicators to monitor the operation and the fill level of the connected sensors. Optical and acoustic main alarm starting when containers are full and stopping as soon as an empty container is confirmed. Available as 1 channel and 2 channel version, suitable for b.safe Waste Caps LC / System Waste Caps LC with main alarm, DLC version for b.safe Waste Caps DLC / System Waste Caps DLC with pre and main alarm. Including power supply (input: AC 100-240 V/50-60 Hz, 0,5 A, output: 24 V DC, 0,5 A) with plugs for EU, Australia, USA, Japan and UK.
Alarm box in plastic housing. Front side with touch buttons and LED indicators to monitor the operation and the fill level of the connected sensors. Optical and acoustic main alarm starting when containers are full and stopping as soon as an empty container is confirmed. Available as 1 channel and 2 channel version, suitable for b.safe Waste Caps LC / System Waste Caps LC with main alarm, DLC version for b.safe Waste Caps DLC / System Waste Caps DLC with pre and main alarm. Including power supply (input: AC 100-240 V/50-60 Hz, 0,5 A, output: 24 V DC, 0,5 A) with plugs for EU, Australia, USA, Japan and UK.
Alarm box with touch buttons and LED indicators to monitor the operation and the fill level of the connected sensors. Programmed only to control the b.safe Splitter for monitoring 2 collection containers and an automatic switching from full to empty container. Only optical alarm when reaching the nominal capacity of container 1, optical and acoustic alarm when nominal capacity of both containers is reached. The acoustic alarm remains activated until an empty container is confirmed. Suitable for b.safe Waste Caps LC / System Waste Caps LC with main alarm. You can choose from 2 versions: “Wall” for an installation in front plates of lab furniture or “Table” with a case for tables. Including power supply (input: AC 100-240 V/50-60 Hz, 0,5 A, output: 24 V DC, 0,5 A) with plugs for EU, Australia, USA, Japan and UK.
System Waste Caps TLC. Screw cap made of PPS, free movable insert made of conductive PE-EX with 1 permanently fixed cable (length approx. 2 m) with either straight plug for direct connection to a b.safe Mini-Display TLC (Cat. No. R 690-05) or with braids for connection to a b.safe Isolated Amplifier TLC (Cat. No. R 695-05) if the System Waste Cap TLC is installed in an explosion-proof area. For a continuous reporting of the fill level via a b.safe Mini-Display TLC, scaling in each 10 % of the nominal volume. Report of fill level starting with 10 %, pre-alert at 80 and 90 % of the nominal volume, main alert for canister exchange at 100 % of nominal volume. For a correct measurement, only use the b.safe canister S60 (Cat. No. R 236- 10). With 1 connection GL 25 suitable for b.safe Waste Tubes and 1 connection GL 14 for fixing a b.safe Venting Hose or a b.safe Exhaust Filter. Design and scope of delivery according to table. Applications With the b.safe System Waste Cap TLC, the canister fill level can be continuously monitored in 10 % steps. A canister exchange can be carried out in advance, e. g. before the end of the day or before the weekend. The measurement of the fill level control is effected without direct contact to the medium, faulty measurements or missing alerts due to dirty floaters and sensors are excluded. With the use of b.safe Waste Tubes solvent waste is led directly into the canister, solvent vapours are held back by the exhaust filter with activated carbon or can be led to the hood by means of a venting hose.
Alarm box with halogen-free plastic case for an installation in front plates of lab furniture. Front side with touch buttons and LED indicators to monitor the operation and the fill level by means of a separately available b.safe System Waste Cap TLC. Continuous display of the fill level, scaling in each 10 % of the nominal volume. Optical pre-alert (flashing yellow LED) as soon as 80 and 90 % of the nominal volume are reached, optical (flashing red LED) and acoustic main alert in case of full canister (approx. 100% of the nominal volume). Acoustic alert can be interrupted for approx. 5 minutes until the container exchange is completed. In case of power interruption, the fill level reports 90 and 100 % are saved. When the system is switched on again, the values are displayed accordingly and the alert is triggered if necessary. Including power supply (Input: AC 100-240 V/50-60 Hz, 0,5 A, Output: 24 V DC, 0,5 A) with plugs for EU, Australia, USA, Japan and UK. Applications Display unit to monitor fill level with connected fill-level sensor of a b.safe System Waste Cap TLC (Cat. No. R 692-05). If the canister to be monitored is installed in an explosion-proof area, a suitable Isolated Amplifier is required for a safe operation. In this case, please order the b.safe System Waste Cap Cat. No. R 697-05 with special signal cable for assembly in the Isolated Amplifier TLC as well as the Isolated Amplifier (Cat. No. R 695-05).
Isolated Amplifier TLC. Delivered in ready-to-assemble plastic housing made of ABS (IP66) that prevents unintentional contact of live parts. With clearly labelled screw connections to connect the signal cable of a b.safe System Waste Cap TLC (Cat. No. R 697-05) for a safe operation of the b.safe Level Sensor in explosion-proof areas. Including installed signal cable (length approx. 1 m) for signal transmission to the b.safe Mini-Display TLC (Cat. No. R 690-05) and power supply (Input: 100-240V/1,2 A, Output: 24V/max. 1,75 A) with plug adapter for EU, Australia, USA, Japan and UK. The installation of the b.safe Isolated Amplifier and the connection of the signal cable have to be carried out by qualified personnel. Applications Encapsulated housing for an installation e.g. at the rear side of a safety cabinet. Safe signal exchange between explosion-hazardous and explosion-proof areas by galvanic isolation of the sensor side and the output side. By using the b.safe Isolated Amplifier in the explosion-proof area, its electronic alerting system prevents ignitable sparks from arising in the explosive atmosphere around the sensors. Exclusively compatible with the b.safe Mini-Display TLC and b.safe System Waste Cap TLC
Can , 10 l, S50 with viewing strip, PE-HD electrostatic conductive with UN - license Dimensions (W x H x D) : 190 x 315 x 230 mm, black Collection container for liquid waste. Made of electrically conductive plastic, with viewing strips for better visual level control. Fulfils the requirements according to TRGS 727, section 4.5.5.
Space-saving canister, 5 liter with mechanical level control, S50, PP, dimensions (W x H x D): 65 x 330 x 405 mm, white color. Collection container for liquid waste, compatible with the SCAT system. Made of chemically resistant plastic. The narrow design is ideal for confined spaces in the HPLC laboratory. With integrated float for level control. Separately available stand (art. no. 199050) ensures a stable stand.
Mechanical level control for barrels
Level control mechanical, for barrels, G3/4" (m) thread, PE-HD, for containers up to 200 L, Lance length: 86 mm, Lance diameter: 18 mm
Level control mechanical, for barrels, G3/4" (m) thread, PTFE not electrostatic conductive, for containers up to 200 L, Lance length: 150 mm, Lance diameter: 18 mm
Protection cage for mechanic level control,against damages to the viewing glass, PP, white color
Hook and loop fastener tape, for disk sensor, length 2 m
Power supply unit UK 220/230V for signal box
Power supply unit USA 220/230V for signal box
Power supply unit EU 220/230V for signal box 24 Volt
Adapter for funnel, mechanical level control, barrel double thread R2" BSP/G2" (m) + Trisure BCS / BSC 56x4 (m), PE-HD electrostatic conductive. Electrically conductive level control with screw-in thread, e.g. for drums or canisters. With integrated level indicator and additional threaded connection for mounting a SCAT safety funnel with GL45 thread.
Adapter for funnel with mechanical level control, S60 (f) to GL45 (m), PE-HD electrostatic conductive with connector M12x1 for mechanical level indicator, 2-colored red/gree
Signal cable for connecting sensor and signal box.
Signal box T1 with disc fill level sensor, 3 m signal cable, 2 m hook and loop fastener for disc sensor incl. 220/230V EU-power supply unit
Signal box T1 - EU, with disc sensor, alarm at empty state, 3 m signal cable, 2 m hook and loop fastener for disc sensor incl. 220/230V EU-power supply
Signal box T1 - EU, with one sensor input and one potential-free switch for control of external units. Display: LED, Power supply: 24V DC EU Plug, Switching power: 24V/2A, Power consumption: max. 4W, Dimensions (WxHxD): ca. 180x105x55 mm, Weight: ca 0,65 kg, Operating temperature: +5°C bis +40°C.
Signal box T5 - EU, with five sensor inputs and six potential-free switches for control of external units. Display: LED, Power supply: 24V DC EU Plug, Switching power: 24V/2A, Power consumption: max. 4W, Dimensions (WxHxD): ca. 180x105x55 mm, Weight: ca 0,65 kg, Operating temperature: +5°C bis +40°C.
Dual Lock (releasable pressure) closure for disc sensors, approx. 20 x 20 mm. Tougher and longer lasting than a conventional hook and loop fastener.
Level disc sensor (alarm at empty state)
Level disc sensor (alarm at full state)
Level control, electronic
Float, electronic, conductive, length 139 mm for level indicator for vent cover S71 / S90
Tamper-evident cap, S60/61 for canister incl. retaining strap
Safety Waste Cap "LISA", V3.0 - Extension electronic level control
Safety Waste Cap "LISA", V3.0 - Extension mechanical level control
Safety Waste Cap "LISA", V3.0 - Extension electronic level control, electrostatic conductive
Safety Waste Cap "LISA", V3.0 - Extension mechanical level control, electrostatic conductive
Single cap S70/71 canister
Disc sensor set, T5, EU, full state Signal box T5: • 5x disc fill level sensor, • 5x 3 m signal cable, • 5x 2 m hook and loop fastener for disc sensor incl. 230V EU-power supply
Float for Safety Waste Caps with mechanical or electronic level control (spare part to reorder / replace).
Please fill out your contact data and your information request, we will contact you as soon as possible with all requested information.
Please fill out your contact data and your information request, we will contact you as soon as possible with all requested information.
