Oxygen Probe for Sterile Conditions. • The InPro 6820 dissolved oxygen sensor with 25 mm diameter body provides maximum accuracy and ultimate cleanability. • The sensor has been developed to comply fully with the EHEDG and FDA flat-surface recommendations for extremely high-level hygienic applications. • The 316L stainless steel construction allows for CIP, steam sterilization or autoclaving in place. The sensor finish eliminates process contamination. • The InPro 6820 DO sensor is easy to integrate into your process. Its T-82 connector helps ensure reliable measurements. Specifications: Measurement parameters: oxygen Measuring technology: Amperometric/polarographic Accuracy: ± (1% of reading +6ppb) Response time: T98 = < 90 s at 25 °C (77 °F) (air on N2) IP protection class: IP68 Primary media/application: pharmaceuticals/life science production ISM (digital) or Analogue: Analogue Anti-bubble design: no Wetted metallic material: 316L stainless steel Surface roughness of the wetted parts (2): N5/Ra16 (Ra = 0.4 μm/16 μin) O-ring material: silicone Process connection: Ingold (25 mm) Membrane material in contact with media: PTFE Plug design: Straight Autoclavable/sterilizable: Yes Mechan. Temp. resistance: -5°C – 140°C Operating pressure (bar): 0.2 to 6 bar Design pressure: 12 bar Analog integration: nA signal Cable connection: T-82 Approvals for hazardous areas: FM (C US): IS / I, II, III / 1 / ABCDEFG/ T6 Ta=60 °C 53 800 002 Unit ATEX:/IECEx: Ex ia IIC T6/T5/T4/T3 Ga/Gb/Ex ia IIIC T69°C/T81°C/T109°C/T161°C Da/Db Certificates and Approvals: Quality Certificate, Material Certificate 3.1, Surface Finish Certificate, ATEX/IECEx/FM Certificate, FDA/USP Class VI Sensor signal in ambient air at 25 °C: 50 to 110 nA Detection limit: 6 ppb Residual signal in oxygen-free media: <0.1% of the signal in ambient air Pressure range during measurement: 0.2 bar – 6 bar Measuring temperature range: 0°C – 80°C Connection: T82 Feedback geben Seitenleisten
Oxygen sensor OptoCap BT02T incl. O-ring for InPro6860i
O²-cable82/ 3m oxygen cable without instrument plug
Portable professional model for dissolved oxygen measurement. New, intuitive menu structure with fast and easy T-Pad navigation Robust design with IP67 protection for use in harsh and demanding environments Intelligent Sensor Management (ISM®) functionality reduces the risk of errors New sunlight-proof screen guarantees screen readability even in direct sunlight New StatusLight gives a fast, visual confirmation showing if the meter is ready to measure or not Operating support for 12 languages with information shown in complete words and sentence Up to 2 calibration points and a choice of 2 predefined oxygen standards Automatic, manual and time dependant endpoint recording Data memory storage for 2000 GLP data points with weatherproof Micro-USB connection for data export Power requirements: 4 x 1.5 V AA or 1.3 V NiMH accumulators Scope of supply: S9-Meter: Includes instrument, LabX® direct pH, USB cable, electrode clip, base accessory, operating instructions, quick guide, test certificate, declaration of conformity, batteries S9-Standard kit: As S9-Meter, but also with InLab® OptiOx™, zero oxygen tablets S9-Field kit: As S9-Standard kit, but also with bottles for calibration, uGo™ carrying case, InLab® OptiOx™ with protective guard S9-BOD kit: As S9-Field kit, but including InLab® OptiOx™ (without protective guard), BOD adapter, BOD application note Specifications: DO Saturation Measuring range: 0.1 ... 500.0% Resolution: 0.1 Accuracy: ±10% Temperature Measuring range: 0.0 ... 50.0°C Resolution: 0.1°C Accuracy: ±0.1°C Dissolved Oxygen Measuring range: 0.01 ... 50.00mg/l (ppm) Resolution: 0.01 Accuracy: ± 0.1mg/l in range 0 ... 8mg/l ± 0.2mg/l in range 8 ... 20mg/l ± 10% in range 20 ... 50mg/l Pressure Measuring range: 500 ... 1100mbar Resolution: 1 Accuracy: ±2% Dimensions (W x D x H): 222 x 70 x 35mm
In-Line CO2 Measurement in Biotechnology. • The InPro 5000i 12/220 is an on-line carbon dioxide sensor with ISM that allows for accurate measurement and control of dissolved CO2 in biopharmaceutical applications. It is based on the widely accepted Severinghaus principle of CO2 measurement. • In situ measurement of CO2 with the InPro 5000i 12/120 allows immediate reaction to CO2 changes to help maximize productivity in cell culture. • Sterilized and autoclaved: The InPro 5000i 12/120 is fully SIP resistant and autoclavable. It is made of FDA compliant materials, making it optimal for pharmaceutical processes. • This CO2 sensor uses a membrane body concept to dramatically limit maintenance time. The inner body, a pH electrode, can easily be replaced on site. • This CO2 sensor uses Intelligent Sensor Management (ISM) technology. This provides pre-batch diagnostics for the best measurement performance and full traceability for complete documentation. The Plug and Measure feature supports seamless integration. Specifications: Measuring range: Concentration: 10 to 1000 mbar pCO2 Measuring range (concentration): 0.145 to 14.5 psig pCO2 Accuracy: ± (10% of measured value + 10mbar) Hygiene/Biocompatibility Approvals: EHEDG EL Class 1, USP Class VI/FDA/USP Class 6 IP protection class: IP67 Autoclavable/sterilizable: Yes CIP capable: Yes Certificates and Approvals: Quality Certificate, Material Certificate 3.1, Surface Finish Certificate, FDA/USP Class IV Measurement parameters: carbon dioxide Cable connection: K8S ISM (digital) or analogue: ISM (digital) Wetted metallic material: 316L stainless steel Surface roughness of the wetted parts (2): N5/Ra16 (Ra = 0.4 μm/16 μin) Sensor diameter (2): 12mm O-ring material: Viton®, silicone Measuring temperature range: 0°C – 60°C Mechan. Temp. resistance: 0°C – 135°C Operating pressure (bar): 0.200 to 2,000 bar Design pressure: 3 bar CO2 operating range: 10 mbar – 1,000 mbar Pressure range during measurement: 0.2 bar – 2 bar Primary media/application: pharmaceuticals/life science production Process connection: Pg 13.5 Response time: T90 = < 120 s, air to CO2 at 25 °C Sensor length: 220 mm Membrane material in contact with media: PTFE Measuring technology: Potentiometric (Severinghaus) Plug design: Straight Feedback geben Seitenleisten
Sensor for polarographic oxygen measurement with high accuracy and repeatability. For use in laboratory, field and industry. Robust construction. Diaphragm mechanically protected by steel mesh, shaft made of glass-fibre reinforced PPS. With integrated temperature sensor. • InLab® oxygen sensors are designed for use with the SevenExcellence™ multi-channel tabletop meter and the portable SevenGo™ 6 meters • InLab®-ISM oxygen sensors are equipped with Intelligent Sensor Management, which enables simple calibration in the air and permanent monitoring of the sensor status Designed for use with the SevenExcellence™ multi-channel tabletop meter and the portable SevenGo™ 68 dual-channel instruments. Specifications Sensor type: Polarographic sensor Measuring range oxygen: 0 ... 200 % / 0 ... 20 mg/l Measuring range temperature: 0... 60 °C Connections: BNC (IP 67) / Cinch (RCA) Shaft diameter: 12 mm Shaft length. 120 mm
The model S900 offers a bench-top solution with OptiOx™ technology: the optical measurement of dissolved oxygen. Thanks to OptiOx™, measuring dissolved oxygen is easier than ever before. For applications where the traditional polarographic measurement is preferred the S600-Kit is recommended. Optical oxygen measurement is superior to conventional technologies. OptiOx™ is fast, precise and produces highly reproducible results. Because of the optical measuring principle used, the oxygen is not chemically consumed during the measurement, which makes stirring the sample superfluous. The InLab OptiOx™ requires no polarization time, meaning you can start your measurement immediately. In addition, the whole measuring system has a high level of stability making calibration rarely necessary. Scope of supply: S900-Basic: Includes instrument, DO/BOD expansion unit, 2 blank expansion units, uPlace™ electrode holder, semitransparent cover, operating instructions, installation and quick guide, LabX® direct pH PC software, declaration of conformity, test certificate S900-Kit: As S900-Basic but with InLab® OptiOx™, guide to DO measurement, zero oxygen tablets S900-BOD: As S900-Kit, also including BOD adapter S600-Kit: As S900-Kit, but with InLab® 605-ISM instead of InLab® OptiOx™ Specifications Measuring range (O2 Saturation): InLab® OptiOx™: 0.0 ... 500 % InLab® 605-ISM: 0.0 ... 600 % Resolution: 0.1 Measuring range (O2concentration) InLab® OptiOx™: 0.000 ... 50 mg/l (ppm) InLab® 605-ISM: 0.00 ... 99 mg/l (ppm) Resolution: 0.001 / 0.01 / 0.1 Accuracy InLab® OptiOx™: ±0.1 mg/l from 0 to 8 mg/l, ±0.2 mg/l from 8 to 20 mg/l, ±10 % from 20 to 50 mg/l InLab® 605-ISM: ±0.5 % Measuring range (Pressure): 500 ... 1100 mbar Resolution: 1 Accuracy:±2 Calibration points: 2 Sensor input InLab® OptiOx™: MiniLTW (IP67) InLab® 605-ISM: BNC Pressure compensation: Automatic / manual
LE Sensor. • Galvanic dissolved oxygen sensor with cable and integrated temperature sensor. Robust and easy. • This pH sensor is always ready to use and gives fast and precise results • The integrated temperature probe guarantees you always measure with the appropiate temperature compensation. Temperature Probe: NTC 30 kΩ
O²-Sensor Simulator InPro6800/6900
Optical DO sensor for dissolved oxygen with an integrated temperature probe. Designed for harsh environments. • InLab OptiOx with optical measurement technology is always ready for use and gives fast and precise results. No maintenance is required. • IP67 - For a water-proof measurement Ensures your entire portable measuring system (Seven2Go meter and InLab sensor) is able to withstand wet and demanding environments. • The integrated temperature probe guarantees you always measure with the right temperature compensation.
Please fill out your contact data and your information request, we will contact you as soon as possible with all requested information.
Please fill out your contact data and your information request, we will contact you as soon as possible with all requested information.
