PL-AMS Resin Aminomethylstyrene resin is a particularly versatile material suitable for the attachment of a variety of spacers, handles and linkers (for use in solid phase synthesis). Application: Synthesis Support
PL-Rink Resin Rink amide resins are often the support of choice for solid phase synthesis of peptide amides using Fmoc chemistry
StratoSpheres for Peptide Synthesis The StratoSpheres product line encompasses a wide range of polymer resin supports for the development and large scale manufacture of peptide APIs.
VariPure IPE is a polymer supported quaternary amine resin with a bicarbonate counter ion. It is designed for removing acidic ion-pair reagents, such as trifluoracetic acid (TFA), formic acid or acetic acid. It is a high performance and economical acid removal material conveniently supplied as pre-packed SPE type devices. The particle size, capacity and device geometry are matched to provide sufficient residence time to achieve effective ion-pair extraction under gravity flow. For acid labile peptides, removal of the ion-pairing agent prevents acid degradation of the peptide during post-HPLC work up, and increases the yield of purified product.
AmphiSpheres Specifically designed for solid phase peptide synthesis, AmphiSpheres amphipathic resin is a key product in the StratoSpheres product family. As the name suggests, this type of material contains both hydrophobic (polystyrene, PS) and hydrophilic (polyethyleneglycol, PEG) components. This subtly changes the swell characteristics of the material allowing a broader range of solvents to be used. At the same time, the active functionality is located at the end of a PEG chain which helps promote reactivity. Two versions are available with differing PEG content: – AmphiSpheres 20 has 20% w/w PEG content and a loading of 0.7 mmol/g. – AmphiSpheres 40 has 40% w/w PEG content and a loading of 0.4 mmol/g. AmphiSpheres 20 contains 20% w/w polyethylene glycol and therefore retains a high loading per gram and has handling characteristics close to that of “glassy” polystyrene. This means that the yield of product is not compromised to the same degree as with larger PEG chains. AmphiSpheres 40 contains 40% w/w polyethylene glycol and uses a longer PEG chain than AmphiSpheres 20. The amount of PEG is noticeable in that the material is more difficult to shrink down without becoming sticky. However the increased length of PEG chain can give significantly improved results in the synthesis of “difficult” peptide sequences. Attachment of the appropriate linker or handle enables the material to be used for the synthesis of peptide acids and peptide amides
Calibration sample, glycogen, Agilent 1100 fluorescence detector G1321A, 1 g
InfinityLab Poroshell 120 Aqueous Method Development Kit, includes Poroshell 120 SB-Aq, Phenyl-Hexyl, Bonus-RP columns.
InfinityLab Poroshell 120 Selectivity Method Development Kit, includes Poroshell 120 EC-C18, Phenyl-Hexyl, Bonus-RP columns.
InfinityLab Poroshell 120 L1, L7, and L10 USP Method Development Kit, includes Poroshell 120 EC-C18, EC-C8, EC-CN columns.
ASTM D6591-06 system calibration standard kit, 5 x 1 mL ampoules
Method EN12916 and IP 391 LC standard calibration standard kit 4 x 1ml. Standard Concentration o-Xylene: 0.5 mg/mL Fluorene: 0.2 mg/mL Phenanthrene: 0.1 mg/mL
EN method 12916/ IP391 system calibration standard kit, 2 ampules x 1 ml. Standard Concentration Oleic acid methyl ester: 800 µg/mL Methyl hexadecanoate: 800 µg/mL Linolenic acid methyl ester: 800 µg/mL Methyl octadecanoate: 800 µg/mL Linoleic acid methyl ester: 800 µg/mL o-Xylene: 5 mg/mL Chrysene: 400 µg/mL Cyclohexane: 10 mg/mL Hexamethylbenzene: 1 mg/mL Naphthalene: 1 mg/mL 1-Phenyldodecane: 1 mg/mL 9-Methylanthracene: 0.5 mg/mL Dibenzothiophene: 0.5 mg/mL
Caffeine standards kit. Includes caffeine at 0.5, 1, 2, 5, 25, 50, 100, 200 µg/mL in water, 8 x 1 mL
Caffeine standards kit for LC/MS OQ/PV. Includes caffeine at 0.5, 1, 5, 25, 50 µg/mL in water, 5 ampoules
NCD checkout standard, 1.5 mL in nitrobenzene, 24 month's shelf life, 1 ampule
GC column test sample for all bore sizes HP-FFAP - Dangerous Good
GC Reference Gas Oil Std for SimDIs 3 x 1 mL
GC Boiling Pt Calibration Standard (#2) for Simulated Distillation for ASTM methods D2887, D7213, D7398; 6 ampules of 1 mL each; MSDS and Certificate of Analysis for this standard are available at www.agilent.com/chem/library and can be searched by lot/batch number and part numbers
GC/MS octafluoronaphthalene (OFN) checkout standard, 10 fg/µL, 3 x 1 mL.
GC/MS Volatiles Analyzer Checkout Mixture, 3 x 1 mL ampoules
GC/MS Toxicology Checkout Mixture, 3 x 1 mL ampoules
Pesticide Checkout std 100 ug/L 3 x 1 ml
GC thermal conductivity detector standard in hexane, 1 mL
Check-out standard, PFN EI, 100 fg/uL octafluoronaphthalene in iso-octane, 3 x 1 mL
Check-out standard, PFN EI, 1 pg/L octafluoronaphthalene in iso-octane, 3 x 1 mL
Check-out standard, PFN EI, 1 pg/L octafluoronaphthalene in iso-octane, 3 x 1 mL
ASTM method D6584 standard MSTFA, N-Methyl-N-(trimethylsilyl)trifluoroacetamide, 10 ampoules, 1 mL each
Standard kit for method EN14105
Boiling point calibration standard #1 for simulated distillation, for ASTM D2887, D7213, D7398, 6 x 1 mL of each. (China only. Hazardous product, will be shipped from another warehouse. The corresponding invoice will be provided by Agilent China Shanghai Legal entity) Concentration: n-Decane 9.7 % (w/w) CAS #: 124-18-5 n-Dodecane 19.9 % (w/w) CAS #: 112-40-3 n-Dotriacontane 0.9 % (w/w) CAS #: 544-85-4 n-Eicosane 1.3 % (w/w) CAS #: 112-95-8 n-Heptadecane 5.2 % (w/w) CAS #: 629-78-7 n-Heptane 4.6 % (w/w) CAS #: 142-82-5 n-Hexadecane 10.3 % (w/w) CAS #: 544-76-3 n-Hexane 4.4 % (w/w) CAS #: 110-54-3 n-Hexatriacontane 0.9 % (w/w) CAS #: 630-06-8 n-Nonane 4.8 % (w/w) CAS #: 111-84-2 n-Octacosane 0.9 % (w/w) CAS #: 630-02-4 n-Octadecane 2.2 % (w/w) CAS #: 593-45-3 n-Octane 4.7 % (w/w) CAS #: 111-65-9 n-Pentadecane 5.1 % (w/w) CAS #: 629-62-9 n-Pentane 8.2 % (w/w) CAS #: 109-66-0 n-Tetracontane 0.9 % (w/w) CAS #: 4181-95-7 n-Tetracosane 0.9 % (w/w) CAS #: 646-31-1 n-Tetradecane 10.2 % (w/w) CAS #: 629-59-4 n-Undecane 4.9 % (w/w) CAS #: 1120-21-4
Pesticide locking standard, 3 ampoules, 1 mL. Contains 10 mg/L of each: Chlorpyrifos, Dichlorvos and Mirex in n-Hexane.
CE-MS Run Buffer, 5 Ampoules, 5 mL. (China only. Hazardous product, will be shipped from another warehouse. The corresponding invoice will be provided by Agilent China Shanghai Legal entity). The CE/MS Sprayer Kit includes the electrospray needle and splitter assembly, which allows the direct connection of the CE instrument with Agilent and other electrospray MS systems. The CE/ME Sprayer Kit needs the CE/MS Adapter Kit to fully support CE/MS coupling.
AA standard, 25 pmol/ µL, 10 x 1 mL. Dangerous goods. Concentration: Glycine for TKN (as N): 0,0751 mg/mL L-Alanine: 0,0891 mg/mL L-Arginine: 0,1742 mg/mL L-Aspartic acid: 0,1331 mg/mL L-Cystine: 0,1471 mg/mL L-Glutamic acid: 0,1471 mg/mL L-Histidine: 0,2096 mg/mL L-Leucine: 0,1312 mg/mL L-Methionine: 0,1492 mg/mL L-Phenylalanine: 0,1652 mg/mL L-Proline: 0,1151 mg/mL L-Serine: 0,1051 mg/mL L-Threonine: 0,1191 mg/mL L-Tyrosine: 0,1812 mg/mL L-Valine: 0,1171 mg/mL
VariPure IPE is a polymer supported quaternary amine resin with a bicarbonate counter ion. It is designed for removing acidic ion-pair reagents, such as trifluoracetic acid (TFA), formic acid or acetic acid. It is a high performance and economical acid removal material conveniently supplied as pre-packed SPE type devices. The particle size, capacity and device geometry are matched to provide sufficient residence time to achieve effective ion-pair extraction under gravity flow. For acid labile peptides, removal of the ion-pairing agent prevents acid degradation of the peptide during post-HPLC work up, and increases the yield of purified product.
VariPure IPE is a polymer supported quaternary amine resin with a bicarbonate counter ion. It is designed for removing acidic ion-pair reagents, such as trifluoracetic acid (TFA), formic acid or acetic acid. It is a high performance and economical acid removal material conveniently supplied as pre-packed SPE type devices. The particle size, capacity and device geometry are matched to provide sufficient residence time to achieve effective ion-pair extraction under gravity flow. For acid labile peptides, removal of the ion-pairing agent prevents acid degradation of the peptide during post-HPLC work up, and increases the yield of purified product.
Response linearity standard in isooctane, 3 x 1 mL. (China only. Hazardous product, will be shipped from another warehouse. The corresponding invoice will be provided by Agilent China Shanghai Legal entity)
OPA reagent, 10 mg/mL each of o-phthalaldehyde and 3-mercaptopropionic acid in 0.4 M borate buffer, 6 x 1 mL
FMOC reagent, 2.5 mg/mL in acetonitrile, 9-fluorenylmethylchloroformate, 10 x 1 mL. Dangerous goods.
Amino acids supplement kit Includes 1 g each of norvaline, sarcosine, asparagine, glutamine, tryptophan, and 4-hydroxyproline
Caffeine standard kit, capillary LC, caffeine in water, 5 mL: 2.0, 4.0, 20.0, 100.0, 200.0 ug/mL,5 x 5 mL
GC standard for Sherlock Microbial identification system, for analysis of FAMEs to identify bacteria, 4 x 2 mL
Caffeine Standards for LC/MS-Trap OQ/PV. Concentration Caffeine (analytical grade): 10 µg/mL
OQ/PV test sample, refractive index detection, glycerin in water at 50, 25, 15, 10, 5 mg/mL, 5 x 5 mL
LC/MS HPLC Method Dev Kit 7
PEEK,starter kit,GD col,X100
Eclipse XDB Start up Kit, includes C18 column, 150 mm tubing, PEEK fittings, isocratic standard
GC/MS Checkout Standards Kit
Please fill out your contact data and your information request, we will contact you as soon as possible with all requested information.
Please fill out your contact data and your information request, we will contact you as soon as possible with all requested information.
