Microtube racks, coloured, PP. Stackable, simple, and small footprint. Alphanumerically identified positions. Suitable for tempering in a water bath as well as storage of samples in the refrigerator and incubation in a climate chamber. The racks are supplied as folded out flat, and can be firmly and inseparably joined together in just a few steps. Working temperatures of -20 to +90 °C. Base area: 265 x 126 mm.
Round-bottom flasks, PFA, transparent, neck with NS 29/32. For rotary evaporators as safety flask usable. High temperature and chemical resistance. The advantages of PFA: particularly suitable for use in trace analysis, long shelf life of low-concentration reference material in PFA vessels, no memory effects. • Virtually no carryover, no cross-contamination through the extreme hydrophobic, anti-adhesive and smooth surfaces • High thermal stability from -200 °C to +260 °C, autoclavable • Chemically inert to almost all chemicals • Good transparency and dimensional stability • Easy to clean • High degree of purity of the starting material
Buckets with spout, PP. Transparent. With division into 1 liter segments. With stable handle and spout for easy emptying. Highly resistant to chemicals. Without lid. Suitable for contact with foodstuffs according to regulation (EU) No. 10/2011.
Narrow and wide mouth bottles, transparent. Screw cap and spray tube made of PP. Precise spray jet and optimized media return flow through the stepless and finely drawn tip of the spray tube.
Buckets, PE-HD. White. Without spout. With division into 1 liter segments. Stable handle with reinforcement in the middle for comfortable carrying. Tightly closing, transparent snap-on lid made of PE-LD – please order separately. Suitable for contact with foodstuffs according to regulation (EU) No. 10/2011.
Transparent wide neck bottle made of PE-LD, high shoulder, suitable for food. With screw cap made of PP. Fexible material with good resilience. Wide neck for easy filling, also ideal for powders and pasty substances.
Narrow and wide mouth bottles, LDPE, transparent. Screw cap and spray tube made of PP. Precise spray jet and optimized media return flow through the stepless and finely drawn tip of the spray tube.
Collecting vessel with a raised scale. With a sturdy, handy handle and white PC lid. Diameter 150 mm, height 220 mm.
Narrow-mouth bottle made of PE-LD, with flat shoulder. With screw cap made of PE-LD.
Griffin beaker, PP, raised scale. Highly transparent. With a raised scale. According to ISO 7056. Autoclavable at 121 ° C (2 bar) according to DIN EN 285.
Narrow-mouth bottle made of PE-LD, transparent, with drip attachment and cap made of PE-HD. Extra long, fine drip tip for precise dosage.
General Purpose Can, Styrene Acrylonitrile (SAN). Crystal clear. With fitted lid. Planar bottom inside, reinforced edge outside for stable placement on the lab bench. Ideal for dust-proof storage of small components, instruments and utensils.
Bottles made from PE-LD (or PP for Acetone and MEK), spray tube from PP. With coloured VENT-CAP which supports easy visual identification of the media. More safety due to the durable safety imprint in accordance to Directive (EC) No. 1272/2008 (GHS), as well as with all important information: ◾ Material name in German, English, French and Spanish ◾ chemical formula, CAS No, hazard pictogram, signal word ◾ Risk Phrases (H phrases), safety phrases (P phrases), as well as NFPA Code Precise spray jet and optimised medium backflow through the continuous and finely drawn tip of the spray tube. Practically no leakage or dripping with the VENT-CAP, the design of which prevents almost all static overpressure
Measuring beaker, PP, raised scale. Highly transparent. With a raised scale and a sturdy, handy handle. Autoclavable at 121 ° C (2 bar) according to DIN EN 285.
Transparent bottle made of PE-HD, with imprint "Ethanol". Atomiser attachment with sturdy, smooth-running pump trigger and adjustable atomizer nozzle, which can be adjusted by gently turning from the finest atomizing (atomizing) to the precise liquid jet. Range about 3-4 meters. For spraying cleaning agents or disinfectants, especially in hard-to-reach areas as well as for applications in thin-layer chromatography.
Bowls, PP, white. Round. With broad, stable edge and circumferential standing ring on the bottom. Suitable for contact with foodstuffs according to regulation (EU) No. 10/2011.
Collecting vessel, PP with lid, PC, raised scale. Volume: 2000 ml. With a sturdy, handy handle and white PC lid. Diameter: 150 mm; height: 220 mm.
Bottles made from PE-LD (or PP for Acetone and MEK), spray tube from PP. With coloured VENT-CAP which supports easy visual identification of the media. More safety due to the durable safety imprint in accordance to Directive (EC) No. 1272/2008 (GHS), as well as with all important information: ◾ Material name in German, English, French and Spanish ◾ chemical formula, CAS No, hazard pictogram, signal word ◾ Risk Phrases (H phrases), safety phrases (P phrases), as well as NFPA Code Precise spray jet and optimised medium backflow through the continuous and finely drawn tip of the spray tube. Practically no leakage or dripping with the VENT-CAP, the design of which prevents almost all static overpressure
Reagent bottle with screw cap made of PP, transparent. Good chemical resistance, ideal for long-term storage of liquids. Autoclavable at 121 ° C (2 bar) according to DIN EN 285.
Narrow- / wide-mouth bottles made of PE-LD, transparent. Screw cap and spray tube from PP. Imprinted with “Distilled Water” in German, English, French and Spanish. With precise spray jet and optimised medium backflow.
Reagent bottle with screw cap made of PP, transparent. Autoclavable at 121 ° C. Good chemical resistance, ideal for storing liquids.
Set of measuring cups, stackable, set: 1 piece each of blue, yellow, red, green, PP. With a stable handle and scale printed on both sides. The volume is therefore easy to read for left and right-handers alike. With a recess in the handle for better water drainage in the dishwasher. In order to protect the printing, cleaning is recommended up to max. 60 °C. For autoclaving, we recommend the version with raised graduation (item no.440941 - 447941).
Bottles made from PE-LD (or PP for Acetone and MEK), spray tube from PP. With coloured VENT-CAP which supports easy visual identification of the media. More safety due to the durable safety imprint in accordance to Directive (EC) No. 1272/2008 (GHS), as well as with all important information: ◾ Material name in German, English, French and Spanish ◾ Chemical formula, CAS No., hazard pictogram, signal word ◾ Risk phrases (H phrases), safety phrases (P phrases), as well as NFPA Code Precise spray jet and optimised medium backflow through the continuous and finely drawn tip of the spray tube. Practically no leakage or dripping with the VENT-CAP, the design of which prevents almost all static overpressure.
Transparent narrow neck bottle made of PE-HD, square. With screw cap made of PE-LD. Space saving due to the square cross section and the raised shoulder.
Transparent wide mouth bottle made of PP. With screw cap made of PP. Good chemical resistance, ideal for long-term storage of liquids. Autoclavable at 121 ° C (2 bar) according to DIN EN 285. Next neck for easy filling, also ideal for powders and pasty substances.
Wash bottles, narrow-mouth bottles, made from PE-LD. Available in four different colours to facilitate ready identification. Screw cap and spray tube from PP. With precise spray jet and optimised medium backflow. 5 pcs/pack
White or transparent bottle made of PP. Atomiser attachment with sturdy, smooth-running pump trigger and adjustable atomizer nozzle, which can be adjusted by gently turning from the finest atomizing (atomizing) to the precise liquid jet. Range about 3-4 meters. For spraying cleaning agents or disinfectants, especially in hard-to-reach areas as well as for applications in thin-layer chromatography.
Transparent, tightly closing, made of PE-LD. *Lid order no. 96593 suitable for bucket order no. 96363 *Lid order no. 96293 suitable for bucket order no. 96093
Griffin beaker made of PMP, crystal clear. With a raised scale. According to ISO 7056. Autoclavable at 121 °C (2 bar) according to DIN EN 285.
Measuring beaker stackable, PP. Highly transparent. With a sturdy handle and easy-to-read, printed black scale on both sides. The volume is therefore easy to read for left and right-handers alike. With a recess in the handle for better water drainage in the dishwasher. In order to protect the printing, cleaning is recommended up to max. 60 °C. For autoclaving, we recommend the version with raised graduations (item no.440941 - 447941).
Set of wash bottles, narrow-mouth bottles, made from PE-LD/PP, blue, yellow, red, green (each 1 pc.). In four different colours to facilitate ready identification. Screw cap and spray tube from PP. With precise spray jet and optimised medium backflow.
Sample containers, PFA. With screw cap made of PFA. Cylindrical, tall shape. Ideal for sample collection, transport and storage of samples. The advantages of the PFA: • Particularly suitable for use in trace analysis • Ideal for sensitive and valuable samples • Long shelf life of low concentration reference material in PFA vessels • No memory effects • Virtually no carry-over and no cross-contamination due to the extremely hydrophobic, anti-adhesive and smooth surfaces • High thermal stability from -200 °C to +260 °C, autoclavable at 121 °C (2 bar) according to DIN EN 285 • Chemically inert to almost all chemicals • Good transparency and dimensional stability • Easy to clean • High degree of purity of the starting material
Bottles made from PE-LD (or PP for Acetone and MEK), spray tube from PP. With coloured VENT-CAP which supports easy visual identification of the media. More safety due to the durable safety imprint in accordance to Directive (EC) No. 1272/2008 (GHS), as well as with all important information: ◾ Material name in German, English, French and Spanish ◾ Chemical formula, CAS No., hazard pictogram, signal word ◾ Risk phrases (H phrases), safety phrases (P phrases), as well as NFPA Code Precise spray jet and optimised medium backflow through the continuous and finely drawn tip of the spray tube. Practically no leakage or dripping with the VENT-CAP, the design of which prevents almost all static overpressure.
Reagent tube racks, PP, white. The special shape makes it possible to check the amounts present in the reagent tubes. With two side-mounted handle straps.
Transparent storage bottle made of PE-HD. With sturdy carrying handle and screw cap. Available in wide neck and narrow neck designs.
Replacement tap for storage bottles made from PP (Cat. No. 81660 to 81666). Complete with 3/4″ pipe fitting and rubber ring.
Instrument trays, MF. White. Tall shape. Rounded corners. Smooth surfaces, easy to clean. Practical tray for instruments, tools, and sensitive utensils. Stable and self-supporting. Fitting lid made of PS, please order separately.
VITgrip™ lab bottles, PP, GL 45 with tamper-evident cap, PP. Everyday use bottles made of plastic for sampling and storing liquids in the lab. Due to the innovative design and the ergonomic shape the bottles have an outstanding easy-grip feature. The slim and tapered shape greatly improves handling in comparison to conventional lab bottles. Furthermore, the molded volume graduations provide texture for an enhanced grip, especially when working with gloves. Through the optimised sealing system of bottle threads and screw cap the bottle is leakproof* and offers an optimum pouring behaviour and easy cleaning due to the hydrophobic material and round shape. With double-sided molded graduations (accuracy ± 5%), the volume inside the bottle is easy to read, even during use. The included tamper-evident cap reliably signals if the bottle is still sealed before opening. The bottle has very good chemical resistance against most acids, bases and alcoholic solutions. Autoclavable at 121 °C (2 bar) according to DIN EN 285. Furthermore, the bottle and tamper-evident cap are suitable for contact with foodstuffs (in compliance with regulation EU No. 10/2011).
Griffin beaker, PP, raised blue embossed scale. Highly transparent. According to ISO 7056. To protect the embossing, cleaning is recommended up to max. 60 °C. Conditionally autoclavable at 121 ° C (2 bar) according to DIN EN 285.
Caps with dropper inserts, PE-HD. For bottles with GL threads. Cap with dropper insert, complete with screw cap made from PE-HD. Extra long, fine dropping tip for accurate dispensing. Suitable for contact with foodstuffs according to regulation (EU) No. 10/2011.
Reagent tube racks, PP, white. For reagent tubes with a diameter of 21 mm. With three levels for precise, vertical positioning of the reagent tubes. Working temperatures of -20 to +90 °C.
Lid, white, PC, for Collectors order nos. 97891, 978081 and 978941
Reagent bottle, transparent. With NS stopper made of PP. - Stopper type A: With square-knob cap and red core. - Stopper type B: With octagonal-knob cap and red core. Good chemical resistance, ideal for long-term storage of liquids. Autoclavable at 121 °C (2 bar) according to DIN EN 285.
Evaporating dishes, PFA. With snap-on lid, PE. For contamination free sample preparation and efficient transportation. Due to a conical depression in the middle of the base very small amounts of a solvent are adequate to absorb the evaporated samples.
Griffin beaker, PP, printed blue scale, not raised. To protect the embossing, cleaning is recommended up to max. 60 °C. Conditionally autoclavable at 121 ° C (2 bar) according to DIN EN 285. For autoclaving we recommend the version with raised graduation (Art. No. 606941 - 617941).
Griffin beaker, PMP, crystal clear. With an easily legible, printed red scale. According to ISO 7056. To protect the printing, cleaning at no higher than 60 °C is recommended.
Transparent narrow neck bottle with high shoulder. With screw cap made of PP. Good chemical resistance, ideal for long-term storage of liquids. Autoclavable at 121 ° C (2 bar) according to DIN EN 285.
Sample containers, PP, transparent, cylindrical, tall shape. With screw cap made of PP. Food-grade product according to Regulation (EC) No. 10/2011.
Funnel, with short stem, according to DIN 12445.
Square, wide-mouth containers, series 310, PVC, Rigid, Amber or Clear PVC containers. Universal container for storage, sample dispatch and transport. The clear version is ideal for colour-fast product presentation. The amber version is suitable for light sensitive products. Please order screw caps separately.
Please fill out your contact data and your information request, we will contact you as soon as possible with all requested information.
Please fill out your contact data and your information request, we will contact you as soon as possible with all requested information.