Measuring cylinder, PTFE / TFM. Translucent and pore-free, design based on ISO 4788. With scaling (not calibrated), spout and reinforcement ring on top. Universally chemically resistant, the medium only comes into contact with PTFE. Applications: Volume measurement of aggressive or ultra-pure liquids
DURAN® Measuring cylinders, hexagonal base, without graduation, without stamping in foot.
Premiumverschluss GL 45, ø 51 mm, height 26 mm, aus TpCH260 (Ähnlich PFA) mit PTFE-beschichteter Silikondichtung.
Pouring ring, premium cap GL 45, height 4 mm, from TpCH260 (similar to PFA), with PTFE-coated silicone seal.
Membrane cap, DIN thread, from PP material, blue, with sealed PTFE membrane for pressure equalization.
Volumetric flask opaque, PMP, class A with screw cap, PP. UV-absorbing, highly transparent. For storing photosensitive substances. With a ring mark individually adjusted to 'In'. Class A tolerances according to DIN EN ISO 1042. With printed lot number and batch certificate. Thermal loads up to 121 ° C (autoclaving) do not permanently exceed the tolerance limit. In order to protect the printing, cleaning is carried out up to max. 60 ° C recommended. Also available with a DAkkS calibration certificate or individual certificate.
Volumetric flasks, PP, Class B with NS stoppers, PP. Highly transparent. Class B tolerances according to DIN EN ISO 1042. Adjusted to IN, with NS plug made of PP. Thermal loads of up to 60 ° C do not permanently exceed the tolerance limit. To protect printing, cleaning at no higher than 60 °C is recommended.
Volumetric flask, class A • made of DURAN® tubing • tolerance according to DIN EN ISO 1042 • DE-M marked according to the German calibration law • standard and special sizes available • inclusive batch certificate * special size in addition to the ISO 1042 range, with conformity certificate.
Volumetric flasks VITLAB® UV-protect, PMP, Class A, with NS stoppers, PP. UV-absorbing, highly transparent. For storing photosensitive substances. With ring mark individually adjusted to In '. Class A tolerances according to DIN EN ISO 1042. With printed lot number and batch certificate. Thermal loads up to 121 ° C (autoclaving) do not permanently exceed the tolerance limit. In order to protect the printing, cleaning is carried out up to max. 60 ° C recommended.
Volumetric flasks, PMP, Class A, with NS stoppers, PP, crystal clear. With ring mark individually calibrated to ‘In’. Class A tolerances according to DIN EN ISO 1042. With printed lot number and batch certificate. Thermal stress up to 121 °C (autoclaving) does not permanently exceed the tolerance limit. To preserve markings, cleaning at no higher than 60 °C is recommended. Also available with DAkkS calibration certificate or individual quality certificate.
Please fill out your contact data and your information request, we will contact you as soon as possible with all requested information.
Please fill out your contact data and your information request, we will contact you as soon as possible with all requested information.