Measuring cylinder, PTFE / TFM. Translucent and pore-free, design based on ISO 4788. With scaling (not calibrated), spout and reinforcement ring on top. Universally chemically resistant, the medium only comes into contact with PTFE. Applications: Volume measurement of aggressive or ultra-pure liquids
DURAN® Measuring cylinders, hexagonal base, without graduation, without stamping in foot.
Premiumverschluss GL 45, ø 51 mm, height 26 mm, aus TpCH260 (Ähnlich PFA) mit PTFE-beschichteter Silikondichtung.
Pouring ring, premium cap GL 45, height 4 mm, from TpCH260 (similar to PFA), with PTFE-coated silicone seal.
Membrane cap, DIN thread, from PP material, blue, with sealed PTFE membrane for pressure equalization.
Volumetric flask opaque, PMP, class A with screw cap, PP. UV-absorbing, highly transparent. For storing photosensitive substances. With a ring mark individually adjusted to 'In'. Class A tolerances according to DIN EN ISO 1042. With printed lot number and batch certificate. Thermal loads up to 121 ° C (autoclaving) do not permanently exceed the tolerance limit. In order to protect the printing, cleaning is carried out up to max. 60 ° C recommended. Also available with a DAkkS calibration certificate or individual certificate.
Volumetric flasks, PP, Class B with NS stoppers, PP. Highly transparent. Class B tolerances according to DIN EN ISO 1042. Adjusted to IN, with NS plug made of PP. Thermal loads of up to 60 ° C do not permanently exceed the tolerance limit. To protect printing, cleaning at no higher than 60 °C is recommended.
Volumetric flask, class A • made of DURAN® tubing • tolerance according to DIN EN ISO 1042 • DE-M marked according to the German calibration law • standard and special sizes available • inclusive batch certificate * special size in addition to the ISO 1042 range, with conformity certificate.
Volumetric flasks VITLAB® UV-protect, PMP, Class A, with NS stoppers, PP. UV-absorbing, highly transparent. For storing photosensitive substances. With ring mark individually adjusted to In '. Class A tolerances according to DIN EN ISO 1042. With printed lot number and batch certificate. Thermal loads up to 121 ° C (autoclaving) do not permanently exceed the tolerance limit. In order to protect the printing, cleaning is carried out up to max. 60 ° C recommended.
Volumetric flasks, PMP, Class A, with NS stoppers, PP, crystal clear. With ring mark individually calibrated to ‘In’. Class A tolerances according to DIN EN ISO 1042. With printed lot number and batch certificate. Thermal stress up to 121 °C (autoclaving) does not permanently exceed the tolerance limit. To preserve markings, cleaning at no higher than 60 °C is recommended. Also available with DAkkS calibration certificate or individual quality certificate.
Volumetric flasks, PFA, Class A, with screw cap Class A tolerances in accordance with DIN EN ISO 1042. The PFA screw cap protects against contamination. Excellent chemical resistance, can be used with strong oxidizing agents, highly concentrated acids and alkalis, hydrocarbons and ketones. With lasered lot number and batch certificate. Thermal loads up to 121 ° C. (Autoclaving) do not permanently exceed the tolerance limit. To protect the ring mark, cleaning up to max. 60 ° C recommended. The advantages of the PFA: long shelf life of low-concentration reference material in PFA vessels, no memory effects, practically no carry-over, no cross-contamination due to the extremely hydrophobic, anti-adhesive and smooth surfaces, high thermal stability from -200 ° C to +260 ° C , chemically inert to almost all chemicals, good transparency and dimensional stability - therefore also suitable for volumetric instruments, easy to clean and high degree of purity of the starting material.
Graduated cylinders, SAN, Class B, short shape, with a raised scale. With molded graduations and ring marks at the primary scale points, calibrated ‘In’. Thermal stress up to 60 °C does not cause tolerance limits to be permanently exceeded. Suitable for contact with foodstuffs according to regulation (EU) No. 10/2011.
Graduated cylinders, PP, Class B, tall shape, with raised blue scale. Highly transparent. With easily readable, molded, embossed blue graduations and ring marks at the primary scale points. Calibrated ‘In’. Class B tolerances according to DIN 12681 / ISO 6706. Hexagonal base with bottom studs provides high stability. Thermal stress up to 80 °C does not cause tolerance limits to be permanently exceeded. To preserve markings do not clean at temperatures exceeding 60 °C. Suitable for contact with foodstuffs according to regulation (EU) No. 10/2011.
Graduated cylinders, SAN, Class B tall shape, with a raised scale. Crystal clear. With molded graduations and ring marks at the primary scale points, calibrated ‘In’. Class B tolerances according to DIN 12681 / ISO 6706. Hexagonal base with bottom studs provides high stability. Thermal stress up to 60 °C does not cause tolerance limits to be permanently exceeded. Suitable for contact with foodstuffs according to regulation (EU) No. 10/2011.
Volumetric flasks, PP, Class B, with screw cap, PP, highly transparent. Class B tolerances according to DIN EN ISO 1042. Adjusted to IN. Cleaning up to max. 60 ° C. Thermal loads of up to 60 ° C do not permanently exceed the tolerance limit. To preserve markings, cleaning at no higher than 60 °C is recommended.
Graduated cylinders, PP, Class B, tall shape, with a raised scale. Highly transparent. With molded scale and ring marks at the primary scale points, calibrated ‘In’. Class B tolerances according to DIN 12681 / ISO 6706. Hexagonal base with bottom studs provides high stability. Thermal stress up to 80 °C does not cause tolerance limits to be permanently exceeded. Suitable for contact with foodstuffs according to regulation (EU) No. 10/2011.
Volumetric flask made of polymethylpentene. Crystal clear. Adjusted to IN. DIN EN ISO 1042. Thermal loads up to 121 ° C (autoclaving) do not permanently exceed the tolerance limit. In order to protect the printing, cleaning is carried out up to max. 60 ° C recommended.
Volumetric flasks, PMP, Class B, with NS stoppers, PP, crystal clear. With ring mark individually calibrated to ‘In’. Class B tolerances according to DIN EN ISO 1042. Thermal stress up to 121 °C (autoclaving) does not permanently exceed the tolerance limit. To preserve markings, cleaning at no higher than 60 °C is recommended.
Graduated cylinders, PMP, Class A, tall form, red printed scale. Crystal clear. DE-M marked. With red printed graduations and ring marks at the primary scale points, calibrated “In”. The lot certificate supplied bears the batch number and the actual nominal value ascertained under the test conditions. The resulting deviations from the nominal value fall well under the allowed tolerances of Class A according to DIN 12681 and ISO 6706. With printed batch number and the year of production. Hexagonal base with bottom studs provides high stability. To preserve markings, do not clean at temperatures exceeding 60 °C. Thus, conditionally autoclavable at 121 °C (2 bar) according to DIN EN 285. For autoclaving we recommend the design with molded graduations (Cat.-No. 64604 – 65304). Also available with DAkkS calibration certificate or individual quality certificate.
Graduated cylinders, PMP, Class A, tall shape, raised scale. Crystal clear. DE-M marked. With molded graduations and ring marks at the primary scale points, calibrated ‘In’. The lot certificate supplied bears the batch number and the actual nominal value ascertained under the test conditions. The resulting deviations from the nominal value fall well under the allowed tolerances of Class A according to DIN 12681 and ISO 6706. With the laser engraved batch number and the year of manufacture. Hexagonal base with bottom studs provides high stability. Thermal stress up to 121 °C (autoclaving) does not cause tolerance limits to be permanently exceeded. Also available with DAkkS calibration certificate or individual quality certificate.
Please fill out your contact data and your information request, we will contact you as soon as possible with all requested information.
Please fill out your contact data and your information request, we will contact you as soon as possible with all requested information.
